show ip igmp vlan config

This command is used to show the IGMP configuration for a VLAN.

Syntax

show ip igmp vlan (vid) config

Example output

Below is the output when version is set to 3.

switch(vlan-60)# show ip igmp vlan 60 config     

 IGMP Service VLAN Config

  VLAN ID : 60   
  VLAN NAME : VLAN60                          
  IGMP Enabled [No] : Yes
  Querier Allowed [Yes] : No 
  IGMP Version [2] : 3   
  Strict Mode                         : No   
  Last Member Query Interval (Seconds) [1] : 1   
  Querier Interval [125] : 125 
  Query Max. Response Time (Seconds) [10] : 10  
  Robustness Count [2] : 2   

  Port    Type       | Port Mode Forced Fast Leave Fast Leave
  ------- ---------- + --------- ----------------- ----------
  1       1000T      | Auto      No                Yes       
  2       1000T      | Auto      No                Yes       
  23      1000T      | Auto      No                Yes