show ip igmp vlan group
This command is used to show IGMP group information for a VLAN.
Syntax
show ip igmp vlan <vid> group
Example output
Below is the output when version is set to 3.
Port and source ipv4 address options are introduced
under group
. The following output captures the details
of these options.
switch(config)# show ip igmp vlan <vid> group
IPV4-ADDR Show IGMP VLAN group address information.
PORT Show a list of all the IGMP groups on the specified port.
switch(config)# show ip igmp vlan <vid> group <ip4-addr>
source Show IGMP VLAN source address information.
switch(config)# show ip igmp vlan <vid> group <ip4-addr> source
IPV4-ADDR Specify the source IPv4 address.
switch(config)# show ipv4 igmp vlan <vid> group <ip4-addr> source <ip4-addr>
switch(vlan-60)# show ip igmp vlan 60 group 235.6.6.6
IGMP ports and group information for group 235.6.6.6
VLAN ID : 60 VLAN Name : VLAN60
Group Address : 235.6.6.6
Last Reporter : 10.255.128.1
Group Type : Filter
V1 V2 Filter Sources Sources
Port Vers Mode Uptime Expires Timer Timer Timer Forwarded Blocked
---- ---- ---- -------- -------- -------- -------- -------- --------- --------
1 3 INC 2m 38s 3m 13s - 0m 0s - 1 0
Group Address : 235.6.6.6
Source Address : 60.0.0.100
Source Type : Filter
Port Mode Uptime Expires Configured Mode
---- ---- -------- -------- ---------------
1 INC 2m 38s 3m 13s auto
Usage errors
Error condition |
Error message |
---|---|
Attempt to pass a nonexistent group |
ipv4 address Group address is not found. |