Displaying IP PIM VLAN configurations
Syntax:
show ip pim interface [vid]
Displays the current configuration for the specified VLAN (PIM interface.)
Field |
Default |
Control command |
---|---|---|
VLAN |
N/A |
vlan vid ip pim |
IP |
N/A |
vlan vid ip pim all | ip-addr |
Mode |
dense |
n/a; PIM Dense only |
Hello interval (sec) |
300 |
ip pim hello interval 5 - 30 |
Hello delay |
5 |
The router includes this value in the "Hello" packets that it sends to neighbor routers. Neighbor routers use this value to determine how long to wait for another Hello packet from the router. See Changing the interval for PIM-SM neighbor notification. |
override interval (msec) |
2500 |
vlan vid ip pim override-interval 500 - 6000 |
Propagation delay (msec) |
500 |
vlan vid ip pim propagation-delay 250-2000 |
LAN prune delay |
Yes |
vlan vid ip pim lan-prune-delay |
LAN delay enabled |
No |
Shows
|
DR priority |
1 |
ip pim-sparse dr-priority 0 - 4294967295 |
Showing a PIM-SM interface configured on VLAN 1
switch(config)# show ip pim interface 1 PIM Interface VLAN : 1 IP Address : 10.1.10.1 Mode : sparse Designated Router : 10.1.10.1 Hello Interval (sec) : 30 Hello Delay (sec) : 5 Override Interval (msec) : 2500 Lan Prune Delay : Yes Propagation Delay (msec) : 500 Lan Delay Enabled : No Neighbour Timeout : 180 DR Priority : 1