Messages related to UDP broadcast forwarding
Message |
Meaning |
---|---|
udp-bcast-forward: IP Routing support must be enabled first. |
Appears in the CLI if an attempt to enable UDP broadcast forwarding has been made without IP routing being enabled first. Enable IP routing, then enable UDP broadcast forwarding. |
UDP broadcast forwarder feature enabled |
UDP broadcast forwarding has been globally enabled on the router. Appears in the Event Log and, if configured, in SNMP traps. |
UDP broadcast forwarder feature disabled |
UDP broadcast forwarding has been globally disabled on the routing switch. This action does not prevent you from configuring UDP broadcast forwarding addresses, but does prevent UDP broadcast forwarding operation. Appears in the Event Log and, if configured, in SNMP traps. |
UDP broadcast forwarder must be disabled first. |
Appears in the CLI if you attempt to disable routing while UDP forwarding is enabled on the switch. |