Examples of changing per-interface settings
Suppose that VLAN 30 is multinetted, with two subnets in area 1 and one subnet in area 5:
vlan 30 ip ospf 10.10.30.1 area 0.0.0.1 ip ospf 10.10.31.1 area 0.0.0.1 ip ospf 10.10.32.1 area 0.0.0.5
If you wanted to quickly reconfigure per-interface
OSPF settings for VLAN 30, such as those listed below, you could use
the commands shown in Figure Reconfiguring per-interface settings in a multinetted VLAN.
Assign a cost of "5" to the two subnets in area 1 and a cost of "10" to the subnet in area 5.
Assign a dead interval of 45 seconds to the subnets in area 1 and retain the default setting (40 seconds) for the subnet in area 5.
