device-profile name
Syntax
[no] device-profile name <PROFILE-NAME> [untagged-vlan <VLAN-ID> tagged-vlan <VLAN-LIST> | cos <COS-VALUE> | ingress-bandwidth <Percentage> | egress-bandwidth <Percentage> | {poe-priority {critical | high | low} | speed-duplex {auto | auto-10 | auto-100 | ...} | poe-max-power <Watts>]
Description
Use this command to create an user-defined profile. A profile is a named collection of port settings applied as a group. You can modify the default profile,
default-ap-profile
, but you cannot delete it. You can create four additional profiles.
default-ap-profile
has the following values:
untagged-vlan
: 1tagged-vlan
: None
ingress-bandwidth
: 100egress-bandwidth
: 100cos
: 0speed-duplex
: autopoe-max-power
: 33poe-priority
: critical
You can modify these parameters. For example, you can execute
no untagged-vlan
to create a device profile with tagged only ports.
Parameters and options
name
Specifies the name of the profile to be configured. The profile names can be at most 32 characters long.
cos
The Class of Service (CoS) priority for traffic from the device.
untagged-vlan
The port is an untagged member of specified VLAN.
tagged-vlan
The port is a tagged member of the specified VLANs.
ingress-bandwidth
The ingress maximum bandwidth for the device port.
egress-bandwidth
The egress maximum bandwidth for the device port.
poe-priority
The PoE priority for the device port.
speed-duplex
The speed and duplex for the device port.
poe-max-power
The maximum PoE power for the device port.
no
Removes the user-defined profiles.
Restrictions
You can modify the configuration parameters of the default profile,
default-ap-profile
, but you cannot delete it or change its name.For Aruba 5400R Switch Series devices, the maximum value for
poe-max-power
is 30 W. For all other devices, the maximum value forpoe-max-power
is 33 W.Egress rate limiting is not supported for devices running on the Aruba 2530 Switch Series.
The
egress-bandwidth
is only supported for Aruba 2920 Switch Series and Aruba 5400R Switch Series with v2 & v3 modules.The
egress-bandwidth
option is not supported and not displayed in the CLI for devices on Aruba 2530 Switch Series.The profile configuration is only applicable to access points.