Customizing the show VLANs output
Syntax
show vlans custom [port port-list] column-list
Specifies the order you want information to display for the
show vlans command. Displays information for one port or a range of ports. If
port-list
is not specified, all ports display.
Fields that can be included in the customized display:
Field |
Display |
Example |
Default width |
|---|---|---|---|
id |
VLAN id |
5 |
6 |
name |
VLAN name |
Vlan55 |
32 |
status |
Status |
Port-based |
10 |
voice |
Voice enabled |
No |
5 |
jumbo |
Jumbos enabled |
No |
5 |
ipconfig |
How the IP address was configured |
Manual Disabled DHCP/BootP |
10 |
ipaddr (IPv4) ipaddr (IPv6) |
The IP addresses |
10.10.10.3 fe80::212:79ff:fe8d:8000 |
15 for IPv4 46 for IPv6 |
ipmask |
The subnet masks |
255.255.255.6/64 (prefix for IPv6 is in format "/XX") |
15 |
proxyarp |
Whether proxy ARP is configured |
No |
5 |
localproxyarp |
Whether local proxy ARP is configured |
No |
9 |
state |
"Up" if at least one port is up |
Up |
5 |
Customizing the VLAN display
Displays
id at its default width, and
name:20 allows up to 20 characters of the VLAN
name to be displayed. The columns selected for display are separated by spaces.
If the width of the column requested is smaller than the header name of the column, the display of the header name is truncated.
switch(config)# show vlan custom A1-A3 id name:20 ipaddr state
Status and Counters - VLAN Information - Custom view
VLANID VLAN name IP Addr State
------ -------------------- --------------------------------- -----
1 DEFAULT_VLAN 15.255.134.74 Up
33 Vlan33 10.10.10.01 Up
44 Vlan44 15.255.164.13 Up
55 Vlan55 15.255.178.2 Down
15.255.178.3
15.255.178.4
60 Vlan60 fe80::212:79ff:fe8d:8000%vlan60 Up
Wrapping column headers
The total output wraps if it is longer than the terminal width; it is not truncated.
switch(config)# show vlan custom id Status and Counters - VLAN Information - Custom view VLANID ------ 1 33 44 switch(config)# show vlan custom id:2 Status and Counters - VLAN Information - Custom view VL -- 1 33 44