`radius-server tracking dead-servers-only`

Syntax

radius-server tracking dead-servers-only 
no radius-server tracking dead-servers-only

Description

If the RADIUS tracking is enabled, this command tracks only nonfunctional servers.

The no form of this command tracks all the servers.

Command context

config

Examples

switch(config)# show radius             
 Status and Counters - General RADIUS Information

 Dead RADIUS server are preceded by *

  Deadtime (minutes)             : 0           
  Timeout (seconds)              : 5           
  Retransmit Attempts            : 3           
  Global Encryption Key          :                                             
                                                                               
  Dynamic Authorization UDP Port : 3799                                        
  Source IP Selection            : Outgoing Interface
  Tracking                       : Enabled
  Request Packet Count           : 2
  Track Dead Servers Only        : Enabled
  Tracking Period (seconds)      : 300
  CPPM Identity                  :

                  Auth  Acct  DM/ Time   |
  Server IP Addr  Port  Port  CoA Window |
  --------------- ----- ----- --- ------ +

switch(config)#show running-config
radius-server tracking dead-servers-only