If access-list name is not valid.
|
Please enter a valid access-list name.
|
If the authentication method is being set to two-factor authentication, various messages display.
|
If both the public key and username/password are not configured: Public key and username/password should be configured for a successful two-factor authentication.
If public key is configured and username is not configured:
Username and password should be configured for a successful two-factor authentication.
If the username is configured and public key is not configured:
Public key should be configured for a successful two-factor authentication.
If “ssh-server” certificate is not installed at the time of enabling certificate-password authentication:
The “ssh-server” certificate should be installed for a successful two-factor authentication.
|
If the authentication method is set to two-factor while installing the public key, a message displays.
|
The client public keys without username will not be considered for the two-factor authentication for the SSH session.
|
If the username and the key installation user for that privilege do not match, a message displays and installation is not allowed.
This will also happen when the authentication method is set for two-factor.
|
The username in the key being installed does not match the username configured on the switch.
|
If the maximum number of <username : TA profile> associations is reached for a given TA profile, a message displays.
|
Maximum number of username associations with a TA profile is 10.
|
If secondary authentication type for two-factor authentication chosen is not "none", a message displays.
|
Not legal combination of authentication methods.
|
If the authentication method is anything other than two-factor and the two-factor authentication method options are set, a message displays.
|
Not legal combination of authentication methods.
|
If two-factor authentication is set and user tries to SSH into another system using
ssh
<ip | hostname> command, a message displays.
|
SSH client is not supported when the two-factor authentication is enabled.
|
If timeSync is in SNTP or Timep when NTP is enabled.
|
Timesync is not configured to NTP.
|
If timesync is NTP and NTP is enabled and we try to change timesync to SNTP.
|
Disable NTP before changing timesync to SNTP or TIMEP.
|
If we try to configure NTP servers more than the configured max-associations value.
|
The maximum number of NTP servers allowed is 2.
|
If we have ‘n’ NTP servers configured and we try to configure a max-associations value less than (n) number of NTP servers already configured.
|
Max-associations value cannot be less than the number of NTP servers configured.
|
If authentication key-id is not configured.
|
Authentication key-id %d has not been configured.
|
If key-id is not marked as trusted.
|
Key-id %d is not trusted.
|
If min poll value is more than max poll value.
|
NTP max poll value should be more than min poll value.
|
If ipv6 is not enabled on vlan interface.
|
IPv6 address not configured on the VLAN.
|