vsf enable
Syntax
vsf enable domain
<DOMAIN-ID>
Description
Enable VSF on the switch. Allows for switches to be stacked using Ethernet ports.
Parameters
NOTE:
The command
vsf enable
causes the switch to reboot once and form the fabric. Upon reboot, the switch comes up in the "VSF enabled" mode. Port numbers are prefixed with member numbers, such as "1/1". The configuration on the switch becoming Commander will be retained, but any pre-existing configuration on other switches will be over-written. The switch will inherit the same switch software as the member becoming Commander. If the software image of a switch needs to be updated, the switch will reboot twice.