show command
Use the following show command to display the different mac-notify traps configured on an interface:
Syntax:
Switch # show mac-notify traps
Displays the following information:
Mac Notify Trap Information Mac-notify Enabled : No Mac-move Enabled : No Trap-interval : 30 Port MAC Addresses trap learned/removed/aged ------ --------------------------------------- 1 Learned, Removed & Aged 2 Removed & Aged 3 Learned & Aged 4 Learned & Removed 5 Aged 6 Learned 7 Removed
Example:
For port 1 the command would be as follows
Switch # show mac-notify traps 1
Displays the following information:
1 Aged