`radius-server tracking`

Syntax

radius-server tracking [enable | disable] [interval <SECONDS>]

Description

Enables or disables the RADIUS server tracking timer in minutes.

Command context

config

Parameters

interval <SECONDS>: Specifies the number of seconds assigned as a RADIUS tracker. Range for this interval is 60-86400 seconds.

show radius

Use the show radius command to display RADIUS tracking information.

switch# show radius
Status and Counters - General RADIUS Information
*Server once reachable will be not be considered alive
Deadtime (minutes) : Infinite
Timeout (seconds) : 5
Retransmit Attempts : 3
Global Encryption Key :
Dynamic Authorization UDP Port : 3799
Source IP Selection : Outgoing Interface
Tracking : Enabled

CPPM Identity :
Auth Acct DM/ Time | Server IP Addr Port Port CoA Window |Encryption Key OOBM
--------- --------- ------- ------- ---- ---- ----------- -------------- -------

#switch show runnig-config
radius-server dead-time infinite
radius-server tracking interval 60

show radius (stacked switch)

Use the show radius command to display RADIUS tracking information on a stacked switch.

Stack(switch)# show radius

 Status and Counters - General RADIUS Information

 Dead RADIUS server are preceded by *

  Deadtime (minutes)             : Infinite
  Timeout (seconds)              : 5
  Retransmit Attempts            : 2
  Global Encryption Key          :

  Dynamic Authorization UDP Port : 3799
  Source IP Selection            : Outgoing Interface
  Tracking                       : Enabled
  Tracking Period (seconds)      : 300
  CPPM Identity                  :

                  Auth  Acct  DM/ Time   | Encryption Key  OOBM
  Server IP Addr  Port  Port  CoA Window | 
---------------- ----- ----- ---- ------  --------------- ----- +
   20.1.1.100      1812  1813  No  300   | procurve         No
 
  *20.1.1.129     1812  1813  No  300    | procurve         No