RPVST+ event log messages
Event |
Log message |
|---|---|
STP enabled/disabled on a VLAN |
Spanning tree Protocol enabled/disabled on vlan
<vlan-id>
|
Switch does not receive BPDUs from peer on a particular VLAN and port |
VLAN
<vlan-id> starved for a BPDU on port
<port number> from
<bridge name>
|
Switch received BPDU with inconsistent VLAN |
Blocking port-name on vlan
<vlan-id>.
|
Inconsistency is restored |
Unblocking port-name on vlan
<vlan-id>Port consistency restored.
|
Root port is changed on a VLAN |
VLAN
<vlan-id>root changed from
<bridgepriorty:mac> to
<bridge priority:mac>
|
Switch received a BPDU with invalid TLV |
Received SSTP BPDU with bad TLV on
<port-number>
<vlan-id>
|
The number of
|
The number of vlan-port instances exceeded the recommended limit of
<num>
|
RADIUS subsystem tries to dynamically change port VLAN assignments when mode is RPVST |
RADIUS unable to assign port to VLAN
<vlan-id> because spanning-tree is running in RPVST+ mode
|
LLDP subsystem tries to dynamically change port VLAN assignments when mode is RPVST |
LLDP unable to assign port
<port-number> to VLAN
<vlan-id> because spanning-tree is running in RPVST+ mode
|
VPORT counts exceed 200 |
The number of vPorts on slot
<slot-number> exceeds the recommended limit of
<vport-count>. PVST BPDUs may be dropped.
|