Example of tagged and untagged VLAN port assignments

If port 7 on an 802.1Q-compliant switch is assigned to only the Red VLAN, the assignment can remain "untagged" because the port will forward traffic only for the Red VLAN. However, if both the Red and Green VLANs are assigned to port 7, then at least one of those VLAN assignments must be "tagged" so that Red VLAN traffic can be distinguished from Green VLAN traffic.
Tagged and untagged VLAN port assignments
In switch X:

  • VLANs assigned to ports X1 - X6 can be untagged because there is only one VLAN assignment per port. Red VLAN traffic will go out only the Red ports, Green VLAN traffic will go out only the Green ports, and so on. Devices connected to these ports do not have to be 802.1Q-compliant.

  • However, because both the Red VLAN and the Green VLAN are assigned to port X7, at least one of the VLANs must be tagged for this port.

In switch Y:

  • VLANs assigned to ports Y1 - Y4 can be untagged because there is only one VLAN assignment per port. Devices connected to these ports do not have to be 802.1Q-compliant.

  • Because both the Red VLAN and the Green VLAN are assigned to port Y5, at least one of the VLANs must be tagged for this port.

In both switches:

  • The ports on the link between the two switches must be configured the same. As shown in the following figure, the Red VLAN must be untagged on port X7 and Y5 and the Green VLAN must be tagged on port X7 and Y5, or the opposite way.

NOTE:

Each 802.1Q-compliant VLAN must have its own unique VID number and that VLAN must be given the same VID in every device where configured. That is, if the Red VLAN has a VID of 10 in switch X, then 10 must also be the Red VID in switch Y.

Example of VLAN ID numbers assigned in the VLAN names screen