Static ACLS

Static ACLs are configured on the switch. To apply a static ACL, assign it to an interface (VLAN or port). The switch supports three static ACL types:

• Routed IPv6 traffic ACL (RACL)An ACL configured on a VLAN to filter routed IPv6 traffic entering or leaving the switch on that interface, as well as IPv6 traffic having a destination on the switch itself. (Except for filtering IPv6 traffic to an address on the switch itself, IPv6 RACLs can operate only while IPv6 routing is enabled.

• VLAN ACL (VACL)An ACL to a VLAN to filter IPv6 traffic entering or leaving the switch on that VLAN interface and having a destination on the same VLAN. The traffic can be either switched or routed.

• Static Port ACLAn ACL assigned to a port to filter IPv6 traffic entering or leaving the switch on that port, regardless of whether the traffic is routed, switched, or addressed to a destination on the switch itself.