Editing an existing authorized IP manager entry
To change the mask or access level for an existing authorized IP manager entry, enter the IPv6 address with the new values. Any parameters not included in the command are reset to their default values.
Editing an existing authorized IP manager entry
The following command replaces the existing mask and access level for IPv6 address 2001:DB8::231:17FF:FEC5:C967 with FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FF00 and operator:
Switch(config)# ipv6 authorized-managers
2001:db8::231:17ff:fec5:c967 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ff00
access operator
The following command replaces the existing mask and access level for IPv6 address 2001:DB8::231:17FF:FEC5:3E61 with FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF and manager (the default values). It is not necessary to enter either of these parameters:
Switch(config)# ipv6 authorized-managers
2001:db8::a05b:17ff:fec5:3f61