show ipv6 routers
Syntax
show ipv6 routers [ vlan
vid
]
Description
Lists the switch's IPv6 router table entries for all VLANs configured on the switch or for a single VLAN. This output provides information about the IPv6 routers from which RAs have been received on the switch.
Options
vlan vid
-
Optional. Specifies only the information on IPv6 routers on the indicated VLAN.
Router Address
-
The IPv6 address of the router interface.
Preference
-
The relative priority of prefix assignments received from the router when prefix assignments are also received on the same switch VLAN interface from other IPv6 routers.
Interface
-
The VLAN interface on which the router exists.
MTU
-
The maximum transmission unit (in bytes) allowed for frames on the path to the indicated router.
Hop Limit
-
The maximum number of router hops allowed.
Prefix Advertised
-
Lists the prefix and prefix size (number of leftmost bits in an address) originating with the indicated router.
Valid Lifetime
-
The total time the address is available, including the preferred lifetime and the additional time (if any) allowed for the address to exist in the deprecated state.
Preferred Lifetime
-
The length of time during which the address can be used freely as both a source and a destination address for traffic exchanges with other devices.
On/Off Link
-
Indicates whether the entry source is on the same VLAN as is indicated in the
Interface
field.
Example output
This example shows
show ipv6 routers
command output
Switch(config)# show ipv6 routers IPv6 Router Table Entries Router Address : fe80::213:c4ff:fedd:14b0 Preference : Medium Interface : VLAN10 MTU : 1500 Hop Limit : 64 Valid Preferred On/Off Prefix Advertised Lifetime(s) Lifetime(s) Link -------------------------- ------------ ------------ ------- 2001:db8:a03:e102::/64 864000 604800 Onlink