show run
Syntax
show run
Description
In addition to the other elements of the current configuration, this command lists the statically configured, global unicast IPv6 addressing and the current IPv6 configuration per-VLAN. The listing might include one or more of the following, depending on what other IPv6 options are configured on the VLAN. Any SLAAC commands in the configuration are also listed in the output, but the actual addresses resulting from these commands are not included in the output.
Options
ipv6 address fe80::interface-id link-local
ipv6 address
prefix:interface-id/prefix-length
ipv6 address autoconfig
ipv6 address dhcp full
[ rapid-commit ]
ipv6
global-unicast-address/prefix
Example output
show run
output listing the current IPv6 addressing commands
Switch# show run
Running configuration:
.
.
.
vlan 10
name "VLAN10"
untagged 1-12
ipv6 address fe80::1:101 link-local 1
ipv6 address dhcp full rapid-commit 2
1 Statically configured IPv6 addresses open in the
show run
output.
2 Commands for automatic IPv6 address configuration appear in the show run output, but the addresses resulting from these commands do not appear in the output.