show access-list tunnel

Syntax

show access-list [vlan vid|tunnel tunnel-id]

Description

Lists the identifiers and types of RACLs and VACLs currently assigned to a particular VLAN in the running-config file. (The switch allows one inbound and one outbound RACL assignment per VLAN, plus one VACL assignment.)

Example output

The following output shows that inbound, routed IPv6 traffic and outbound, routed IPv4 traffic are both filtered on VLAN 20.

Switch(config)# show access-list vlan 20

 Access Lists for VLAN 20

 Ipv6 Inbound Access List: Accounting 1

 Inbound Access List: None 2

 Ipv6 Outbound Access List: None 3

 Outbound Access List: 101 4

 Type: Extended

 Ipv6 VACL Access List: None 5

 VACL Access List: None 6

 Connection Rate Filter Access List: None 7

1 An IPv6 ACL named "Accounting" is assigned to filter routed IPv6 traffic entering the switch on VLAN 20

2 There is no filtering of routed IPv4 traffic entering the switch on VLAN 20

3 There is no filtering of routed IPv6 traffic leaving the switch on VLAN 20

4 An extended ACL named "101" is assigned to filter routed IPv4 traffic exiting from the switch on VLAN 20

5,6 There are no per-VLAN IPv6 or IPv4 ACLs assigned to VLAN 20

7 Applies to IPv4 Connection Rate Filter ACLs. See "Virus Throttling (Connection-Rate Filtering)" in the Access Security Guide for your switch.