rp-address
Syntax
rp-address <IPV6-ADDR> <GROUP-ADDR/GROUP-MASK> <OVERRIDE>
no rp-address <IPV6-ADDR> <GROUP-ADDR/GROUP-MASK> <OVERRIDE>
Description
Statically configuring the router as the RP for a specific multicast group or range of multicast groups in all PIMv6-SM domain.
The
no
form of this command disables the static RP configuration from PIMv6-SM domain.
Command context
PIMv6
Parameters
<IPV6-ADDR>
-
Statically specifies the IP address of the interface to use as an RP. Up to eight static RP IP addresses can be configured. Each address can be entered multiple times for different multicast groups or group ranges.
<GROUP-ADDR/GROUP-MASK>
-
Specifies the multicast group or range of contiguous groups supported by the statically configured RP. Up to eight multicast group ranges can be configured.
<OVERRIDE>
-
Sets the configuration of static RP support with override.