rp-candidate source-ip-vlan

Syntax

rp-candidate source-ip-vlan <VID> <GRP-ADDRESS | GRP-MASK>

no rp-candidate source-ip-vlan <VID> <GRP-ADDRESS | GRP-MASK>

Description

Configure C-RP operation by specifying the VLAN interface from which the RP IP address will be selected for advertising and enabling the router as an RP-candidate.

The no form of this command disables the C-RP operation without removing the C-RP configuration.

Command context

PIMv6

Parameters

<VID>: Specifies the VLAN ID.
<GRP-ADDRESS | GRP-MASK>: Specifies the multicast group or range of contiguous groups supported by the statically configured RP. Up to eight multicast group ranges can be configured.