Viewing debug counters for all MST instances
The show spanning-tree debug-counters command allows you to display the aggregate values of all MSTP debug
counters that are maintained on a switch. These aggregate values are
a summary of the information collected from all ports and from all
spanning tree instances that forward traffic on switch ports.
Use the displayed diagnostic information to globally monitor MSTP operation on a per-switch basis.
Syntax:
show spanning-tree debug-counters
Displays debug counters for MSTP activity on all ports configured for VLANs used in spanning tree instances.
Viewing output for debug counters
The following example shows sample output of
the show spanning-tree debug-counters command for
all ports.
switch(config)# show spanning-tree debug-counters Status and Counters - MSTP Bridge Common Debug Counters Information Counter Name Aggregated Value Collected From --------------------------------- ---------------- -------------- Invalid BPDUs 0 CIST Errant BPDUs 170927 CIST MST Config Error BPDUs 0 CIST Looped-back BPDUs 0 CIST Starved BPDUs/MSTI MSGs 0 CIST/MSTIs Exceeded Max Age BPDUs 0 CIST Exceeded Max Hops BPDUs/MSTI MSGs 0 CIST/MSTIs Topology Changes Detected 2 CIST/MSTIs Topology Changes Tx 6 CIST/MSTIs Topology Changes Rx 4 CIST/MSTIs Topology Change ACKs Tx 0 CIST Topology Change ACKs Rx 0 CIST TCN BPDUs Tx 0 CIST TCN BPDUs Rx 0 CIST CFG BPDUs Tx 0 CIST CFG BPDUs Rx 0 CIST RST BPDUs Tx 0 CIST RST BPDUs Rx 0 CIST MST BPDUs/MSTI MSGs Tx 10 CIST/MSTIs MST BPDUs/MSTI MSGs Rx 341802 CIST/MSTIs