Show command for detailed MACsec statistics on a port

Syntax

show macsec statistics <port-num> detail

Show detailed statistics for a MACsec-enabled port.

statistics: Show MACsec statistics.
detail: Show detailed statistics for a MACsec-enabled port.
[ethernet] PORT-NUM: The port to show MACsec statistics for.

show macsec statistics A1 detail

switch(config)# show macsec statistics A1 detail

Status and Counters - MACsec Protocol
Interface : A1
Receive Statistics
Totals (Since boot or last clear) :  
Bytes Received        : 234435
Unicast Packets       : 0
Multicast Packets     : 0
Broadcast Packets     : 0
Errors (Since boot or last clear) :
Discarded Packets     : 0
Crypto Overruns      : 0
Packets With No Tag  : 0
Erroneous Packets     : 0

Packets With Bad Tag : 0
Packets With No SCI  : 0

Transmit Statistics
Totals (Since boot or last clear) :
Bytes Transmitted     : 28733989
Unicast Packets       : 0
Multicast Packets     : 0 
Broadcast Packets     : 0
Errors (Since boot or last clear) :
Erroneous Packets     : 0
Packets Too Long      : 0

Secure Channel Transmit Statistics
Encrypted Packets    : 0
Bytes Protected      : 0 
Bytes Encrypted      : 0

Secure Association Statistics
Association Number   : 0 (old)
Protected Packets  : 0

Encrypted Packets  : 0
Association Number   : 1 (current)
Protected Packets  : 0
Encrypted Packets  : 0

Secure Channel Receive Statistics
Not using SA         : 0
Late                 : 0
Not Valid            : 0
Delayed              : 0
Valid                : 0
Bytes Validated      : 0
Bytes Decrypted      : 0

Secure Association Statistics
Association Number   : 1 (current)
Not using SA        : 0
Not Valid           : 0
Valid               : 0