Printable version

Drivers & software

OFFLINE Firmware image (.iso) for HP Emulex Converged Network Adapters and Network Adapters

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - Network
Version: 10.2.340.19 Legacy Boot(2 Mar 2015)
Operating System(s):
OS Independent
File name: Legacy_OneConnect-Flash-10.2.340.19.iso (51 MB)
ISO Firmware image for offline update of NC550m,NC550SFP,NC551i, NC551m,NC552m,NC552SFP,NC553i,NC553m,552M,554M,554FLB,554FLR-SFP+,556FLR-SFP+,650FLB,650M and CN1000E,CN1100E,CN1200E adapters, NICs and server LOMS. UEFI boot version only supported with 556FLR-SFP+, 650FLB,650M and CN1200e.

Using the ISO image to update firmware

 

If your firmware is more than one revision back, you may find it more convenient to load the latest version using the offline method described below.

This allows you to jump from any older version to the latest without encountering any compatibility issues in the firmware update process.

 

 

Step 1: Burn a cd/dvd using the file OneConnect-Flash-4.0.xxx.xx.iso

 

Step 2: Configure your host server to boot from the CD/DVD.

 

Step 3: Boot server using the cd/dvd containing the ISO image labeled,

 

 

Step 4: Enter "y" when prompted with "Do you want to continue (y/n)?"

 

Step 5: Once the flash image is updated, you will see "Percent Complete 100%" followed by the "#" prompt.
 

Step 6: Type "reboot"

 

Step 7: Remove CD or DVD from the player

 

Step 8: Once the host reboots, install the appropriate driver kit

 

Please note that if you use this method of updating firmware, you'll need to power cycle the CNA/LOM in order to get the LEDs to function properly afterwards.

 

 

 

 

 

Untitled Document

OneConnect UCNA Firmware Release Notes for HP, September 2014

BE2 Firmware Version 4.9.416.2

BE2-based Models:
NC550SFP
NC550m
CN1000E
NC551m
NC551l BL465C-G7
NC551l BL685C-G7

BE3 Firmware Version 10.2.340.19

BE3-based Models:
NC553l BL460c G7
NC553l BL490c G7
NC553l BL620c G7
NC553l BL680c G7
NC553m
NC552m
NC552SFP
CN1100E
554FLR-SFP+
554FLB
554M
552M

OCe14000 Based Firmware Version 10.2.340.19

OCe14000-based Models:
CN1200E
556FLR-SFP+
650FLB
650M

Purpose and Contact Information

These release notes describe the content, resolved known issues, and
current known issues associated with this OneConnectâ„¢ Universal
Converged Network Adapter (UCNA) firmware/boot code release.

Content:

Enhancements

OCe14000 Based Adapters

Support for the initial release of the following four adapters:

HP StoreFabric CN1200E Dual Port Converged Network Adapter
HP FlexFabric 20Gb 2-port 650FLB Adapter
HP FlexFabric 20Gb 2-port 650M Adapter
HP FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter



Fixes

BE2 Adapters

- Corrects an issue where a CN1000E CNA fails to maintain login in a multi-FCF environment.

 

BE3 Adapters

- Corrects an issue where a CN1000E CNA fails to maintain login in a multi-FCF environment.
- Resolves an issue where the CNA stops passing traffic when promiscuous mode is turned off.
- Resolves issue where HP Flex-10 10Gb 2-port 552M Adapter option ROM does not create Logical Functions.

 

 

Known Issues

1. Firmware 4.2.401.6 is not compatible with Rhel 6.2x64 Inbox NIC driver
(version 4.1.255.11). In order to upgrade to Firmware 4.2.401.6, you must first
upgrade to Rhel 6.2x64 driver version 4.2.392.1 or later.

Symptom seen with 4.1.255.11 inbox driver: “TX hang in standard error as well as