Type: |
Utility - Tools |
Version: |
2.1(12 Oct 2017) |
Operating System(s): |
Red Hat Enterprise Linux 5 Server (x86-64)
|
Red Hat Enterprise Linux 6 Server (x86-64)
|
Red Hat Enterprise Linux 7 Server
|
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
|
SUSE Linux Enterprise Server 12
|
|
Description
Command line tool for interacting with iLO RESTful interface
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Support for NVDIMM commands.
Installation Instructions
To ensure the integrity of your download, HPE recommends verifying your results with
this SHA-256 Checksum value:
5e75cfc24173a055cb56022874200827d611875ccaa5a7b81aab6d4167553e85 |
RPMS/x86_64/ilorest-2.1-73.x86_64.rpm |
Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Release Notes
Revision History
Version:3.1.1 (12 Nov 2020)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
For fixes, refer Change log.
Version:3.1.0 (5 Oct 2020)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
- ServerClone Updates/Fixes
- Update to new raw file format {path: body}
- Added ability to create custom roles with the directory command
- Addressed RESTful Interface Tool timeout issue during UBM1 Firmware flash
- Fixed LDAP Kerberos authentication enable/disable issue
Version:3.0.1 (29 Jan 2020)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- Fixed serverclone SSA usage.
- Fixed serverclone benign error appearing when performing a load.
Version:3.0.0 (20 Dec 2019)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- Added support for SSL certificate verification
- Added support in the iloaccount command to add and remove user certificates
- Added Tab complete support in interactive mode to read schema data of properties
- Updated ilofederation command to match iloaccounts
Version:2.5.1 (23 Sep 2019)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- Fixed error validating system unique properties when using load command and Bios. selector.
- Fixed some issues patching certain properties in serverclone.
Version:2.5.0 (5 Jul 2019)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- Added Persistent Memory Commands
- Added the ability to select controllers by Slot in Smart Array commands.
Version:2.4.1 (4 Apr 2019)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- New Commands
- serverclone: Used for saving and loading iLO, Bios, and Smart Array configurations. Can be used to save from one system and load it to many or for backups.
- backuprestore: Saves and loads a backup iLO config file. Can only load a file from the same system that the file came from.
- onebuttonerase: Performs and monitors the One Button Erase process for server re-purpose and decommission.
- directory: Configures and shows LDAP and Kerberos directory settings for iLO as well as performs tests for directory connection.
- New options
- Save command option, --multisave, allows you to save more than one type to a single file.
- Other important changes
- The tool no longer force logs you out after committing. This will allow you to continue making changes on the same session.
Version:2.3.4 (31 Oct 2018)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- Fixed an issue with local AHS downloads.
Enhancements
- Added command to guide users through creation of an install set.
- Added maintenance window command.
- Added new options for invoking install sets.
Version:2.3.3 (23 Oct 2018)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- Fixed an issue with the flashfwpkg command.
Enhancements
- Added command to guide users through creation of an install set.
- Added maintenance window command.
- Added new options for invoking install sets.
Version:2.3.1 (2 Jul 2018)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
- Added command to guide users through creation of an install set.
- Added maintenance window command.
- Added new options for invoking install sets.
Version:2.2.2 (16 Feb 2018)
Fixes
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Resolves issue in RESTful Interface Tool version 2.20 which prevented usage of the --biospassword flag.
Version:2.2 (5 Feb 2018)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for local iLO High Security mode.
Added ipprofiles command.
Added FIPS mode.
Version:2.1 (12 Oct 2017)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Support for NVDIMM commands.
Version:2.0 (12 Jul 2017)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Adding support for iLO 5.
Version:1.5.1 (25 Jan 2017)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Support for iLO “Enforce AES/3DES Encryption” mode.
Version:1.5 (10 May 2016)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Fixes and enhancements can be found in the release notes located here: http://www.hpe.com/support/restful_tool_rn_en
Version:1.4 (1 Apr 2016)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Fixes and enhancements can be found in the release notes located here: www.hpe.com/support/restful_tool_rn_en
Version:1.3 (27 Aug 2015)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Fixes and enhancements can be found in the release notes located here: www.hp.com/support/restful_tool_rn_en
Version:1.2 (26 Jun 2015)
Fixes
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Fixes and enhancements can be found in the release notes located here: www.hp.com/support/restful_tool_rn_en
Version:1.1 (1 Apr 2015)
Enhancements
Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.
Added support for the following Gen9 Servers:
- HP ProLiant ML110 Gen9 Server
- HP Apollo 2000 Server
- HP ProLiant WS460c Gen9 Server
Version:1.0 (30 Oct 2014)
Enhancements
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial version.