Printable version

Drivers & software

Gen10 Service Pack for ProLiant

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Application (Login Required) - System Management
Version: 2020.03.2(5 Sep 2020)
Operating System(s): Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019
Red Hat Enterprise Linux 7 Server
Red Hat Enterprise Linux 8 Server
SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 15
VMware vSphere 6.5
VMware vSphere 6.7
The Gen10 Service Pack for ProLiant (SPP) is a comprehensive systems software and firmware update solution, which is delivered as a single ISO image. This solution uses Smart Update Manager (SUM) as the deployment tool and is tested on all HPE ProLiant Gen10 and later servers as defined in the Service Pack for ProLiant Server Support Guide found at www.hpe.com/servers/spp/documentation.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

662afb0d10be834bfbe2c8c8755bd3cf2e6c9ed7bba80831139a2a64c957c8f8 SPP2020032.2020_0831.6.iso.sha2sum
740813655a99b2ef510b9d14881b0c91f5806e112254c86fe002ae59c714489b SPP2020032.2020_0831.6_Components.md5
60fd96fc41fb52f179051ec08380372de72722cc100d1f006c53ba164b89d930 SPP2020032.2020_0831.6.iso
0da02dacb722639e430c299b71227d3cbd1e95fa1037eb54d7f3125ad19fc518 SPP2020032.2020_0831.6_Components.sha256
e788ffd078c89b2a299d7da8231ffaa3c0db0011eb03c6b24bcfce4dfb0f7896 SPP2020032.2020_0831.6.iso.md5sum

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

There are two methods for using the Service Pack for ProLiant to update your ProLiant servers: Online mode and Offline mode.

Online mode - Runs on a Windows or Linux hosted operating system

  • Interactive mode - Follow the onscreen steps to update firmware components
    To initiate deployment in interactive mode, run the launch_sum.bat (windows) or launch_sum.sh (Linux) script which is found in the root of the .ISO image

Offline mode - Server is booted to the .ISO image

  • Automatic mode - Firmware components will be updated without interaction
    Automatic mode will by default run firmware update without any user interaction after sitting 10 seconds at the menu screen when an SPP .iso image is used to boot the server.
  • Interactive mode - Follow the onscreen steps to update firmware components

Click here for the Service Pack for ProLiant Release Notes


End User License Agreements:
HPE Software License Agreement v1
BSD License
gSOAP Software End User License Agreement
Libcurl End User License Agreement
The MIT License Agreement
OpenSSL License Agreement
zlib End User License Agreement
Hewlett-Packard End User License Agreement
OpenSSL License Agreement, Version 0.9.8
PNG Graphics File Format Software End User License Agreement
UEFI EDK2 License
BladeSystem Onboard Administrator Software End User License Agreement
Apache License Version 2.0, January 2004
Eclipse License
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999
Net-SNMP License
SNIA License
Boost License
Boost-MIT Combined License
BSD 4 Clause License
BSD 2 Clause License
The “New” BSD License
CDDL License
Distributable Code for Microsoft Visual Studio 2013 and Microsoft Visual Studio 2013 SDK
FreeBSD License
GNU General Public License, Version 3.0
GNU GENERAL PUBLIC LICENSE Version 2, June 1991
Microsoft Software License Terms Microsoft Visual Studio Professional 2013 And Trial Edition
MOZILLA PUBLIC LICENSE Version 1.1
OpenLDAP Software End User License Agreement
OpenPegasus License
PHP License, Version 3.01
Sun Microsystems Inc. Swing Graphical End User License Agreement
7-zip License


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

The 2020.03.2 Gen10 SPP contains updates pertaining to Customer Bulletin a00102358en_us.

This version addresses the vulnerability described in the bulletin that impacts Offline mode of update using bootable ISO of HPE Service Pack for ProLiant (SPP) on a Secure Boot mode enabled system.

 

This SPP also contains updates pertaining to:

  • Customer Bulletin a00097210en_us.  (Bulletin: HPE Smart Array SR Gen10 Controllers - FIRMWARE UPDATE REQUIRED to Prevent Potential Data Inconsistency on Select RAID Configurations Created with Smart Array Gen10 Firmware Version 1.98 through 2.62).
  • Customer Notice a00097789en_us with the exception of the HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2012 R2, Windows Server 2016, and Windows Server 2019 v106.12.6.0.  This driver can be found on HPE.com and on Custom Download.
  • When using HPE OneView prior to version 5.00.00 and the 2020.03.0 SPP, an error may be seen during FW update of iLO5. For additional information, please review CA a00094676en_us.

HPE StoreOnce Customers – Installation of the SPP can cause problems on StoreOnce systems.  Please go to the HPE Support Center at https://support.hpe.com/hpesc/public/home/result?qt=storeonce to find the appropriate StoreOnce update.

Components for the G7 and Gen8 server platforms are available in the Post-Production SPPs and can be downloaded from www.hpe.com/servers/SPP/download. For additional information, please refer to Reducing Server Updates

 

Note: Products sold prior to the separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. on November 1, 2015 may have a product name and model number that differ from current models.


Notes:

For a specific list of firmware and software smart components included with this ISO, please see the Service Pack for ProLiant Release Notes or Service Pack for ProLiant Contents Report.

For firmware and driver support for specific hardware, go to the following URL: http://www.hpe.com/support.


Supported Devices and Features:

For supported hardware, see the Service Pack for ProLiant Server Support Guide.


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The 2020.03.2 SPP addresses Boothole Vulnerability.

The 2020.03.2 Gen10 SPP contains updates pertaining to Customer Bulletin a00102358en_us.

This version addresses the vulnerability described in the bulletin that impacts Offline mode of update using bootable ISO of HPE Service Pack for ProLiant (SPP) on a Secure Boot mode enabled system.

 

This SPP also contains updates pertaining to:

  • Customer Bulletin a00097210en_us.  (Bulletin: HPE Smart Array SR Gen10 Controllers - FIRMWARE UPDATE REQUIRED to Prevent Potential Data Inconsistency on Select RAID Configurations Created with Smart Array Gen10 Firmware Version 1.98 through 2.62).
  • Customer Notice a00097789en_us with the exception of the HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2012 R2, Windows Server 2016, and Windows Server 2019 v106.12.6.0.  This driver can be found on HPE.com and on Custom Download.
  • When using HPE OneView prior to version 5.00.00 and the 2020.03.0 SPP, an error may be seen during FW update of iLO5. For additional information, please review CA a00094676en_us.

HPE StoreOnce Customers – Installation of the SPP can cause problems on StoreOnce systems.  Please go to the HPE Support Center at https://support.hpe.com/hpesc/public/home/result?qt=storeonce to find the appropriate StoreOnce update.

Components for the G7 and Gen8 server platforms are available in the Post-Production SPPs and can be downloaded from www.hpe.com/servers/SPP/download. For additional information, please refer to Reducing Server Updates

 

Note: Products sold prior to the separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. on November 1, 2015 may have a product name and model number that differ from current models.

Version:2020.09.0 (5 Oct 2020)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The 2020.09.0 SPP Production release contains components supporting the ProLiant and Apollo Gen9, Gen10 and Gen10 Plus server platforms and options. This SPP release contains Smart Update Manager (SUM) 8.7.0 and driver support for:

  • Red Hat Enterprise Linux 7.8 and 8.2
  • SUSE Linux Enterprise Server 15 SP2 

This release now includes support for online update of VMware ESXi 7.0 and ESXi 7.0 U1 on Gen10 and later server platforms.

2020.09.0 SPP release supersedes the 2020.03.2 SPP.

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2020.03.2 (5 Sep 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The 2020.03.2 SPP addresses Boothole Vulnerability.


Version:2020.03.1 (31 Jul 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


*REMOVED* - Version Gen10 2020.03.1 is NO LONGER AVAILABLE for download. Replacement version will be available soon. For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102358en_us

Enhancements

None


Version:2020.03.0 (3 Apr 2020)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


**REMOVED** The 2020.03.0 Gen10 SPP Production release contains components supporting the ProLiant and Apollo Gen10 and Gen10 Plus server platforms and options. This SPP is a maintenance release containing Smart Update Manager (SUM) 8.5.0(A) and driver support for:

  • Red Hat Enterprise Linux 8.1
  • SUSE Linux Enterprise Server 12 SP5

2020.03.0 Gen10 SPP release supersedes the 2019.12.0 Gen10 SPP. 

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2019.12.2 (16 Sep 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The 2019.12.2 Gen10 SPP addresses BootHole Vulnerabilities.


Version:2019.12.1 (31 Jul 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


*REMOVED* - Version Gen10 2019.12.1 is NO LONGER AVAILABLE for download. Replacement version will be available soon. For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102358en_us

Enhancements

None


Version:2019.12.0 (6 Jan 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


*REMOVED* - Version Gen10 2019.12.0 is NO LONGER AVAILABLE for download. For more information, please refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102358en_us

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The 2019.12.0 Gen10 SPP Production release contains components supporting the ProLiant and Apollo Gen10 and Gen10 Plus server platforms and options. 

The 2019.12.0 Gen10 SPP Production release provides support for:

  • Smart Update Manager 8.5.0(A)
  • Online Firmware support for Red Hat Enterprise Linux 8.0

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Type: Application (Login Required) - System Management
Version: 2020.03.2(5 Sep 2020)
Operating System(s):
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019
Red Hat Enterprise Linux 7 Server
Red Hat Enterprise Linux 8 Server
SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 15
VMware vSphere 6.5
VMware vSphere 6.7

Description

The Gen10 Service Pack for ProLiant (SPP) is a comprehensive systems software and firmware update solution, which is delivered as a single ISO image. This solution uses Smart Update Manager (SUM) as the deployment tool and is tested on all HPE ProLiant Gen10 and later servers as defined in the Service Pack for ProLiant Server Support Guide found at www.hpe.com/servers/spp/documentation.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

662afb0d10be834bfbe2c8c8755bd3cf2e6c9ed7bba80831139a2a64c957c8f8 SPP2020032.2020_0831.6.iso.sha2sum
740813655a99b2ef510b9d14881b0c91f5806e112254c86fe002ae59c714489b SPP2020032.2020_0831.6_Components.md5
60fd96fc41fb52f179051ec08380372de72722cc100d1f006c53ba164b89d930 SPP2020032.2020_0831.6.iso
0da02dacb722639e430c299b71227d3cbd1e95fa1037eb54d7f3125ad19fc518 SPP2020032.2020_0831.6_Components.sha256
e788ffd078c89b2a299d7da8231ffaa3c0db0011eb03c6b24bcfce4dfb0f7896 SPP2020032.2020_0831.6.iso.md5sum

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

There are two methods for using the Service Pack for ProLiant to update your ProLiant servers: Online mode and Offline mode.

Online mode - Runs on a Windows or Linux hosted operating system

  • Interactive mode - Follow the onscreen steps to update firmware components
    To initiate deployment in interactive mode, run the launch_sum.bat (windows) or launch_sum.sh (Linux) script which is found in the root of the .ISO image

Offline mode - Server is booted to the .ISO image

  • Automatic mode - Firmware components will be updated without interaction
    Automatic mode will by default run firmware update without any user interaction after sitting 10 seconds at the menu screen when an SPP .iso image is used to boot the server.
  • Interactive mode - Follow the onscreen steps to update firmware components

Click here for the Service Pack for ProLiant Release Notes


Release Notes

End User License Agreements:
HPE Software License Agreement v1
BSD License
gSOAP Software End User License Agreement
Libcurl End User License Agreement
The MIT License Agreement
OpenSSL License Agreement
zlib End User License Agreement
Hewlett-Packard End User License Agreement
OpenSSL License Agreement, Version 0.9.8
PNG Graphics File Format Software End User License Agreement
UEFI EDK2 License
BladeSystem Onboard Administrator Software End User License Agreement
Apache License Version 2.0, January 2004
Eclipse License
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999
Net-SNMP License
SNIA License
Boost License
Boost-MIT Combined License
BSD 4 Clause License
BSD 2 Clause License
The “New” BSD License
CDDL License
Distributable Code for Microsoft Visual Studio 2013 and Microsoft Visual Studio 2013 SDK
FreeBSD License
GNU General Public License, Version 3.0
GNU GENERAL PUBLIC LICENSE Version 2, June 1991
Microsoft Software License Terms Microsoft Visual Studio Professional 2013 And Trial Edition
MOZILLA PUBLIC LICENSE Version 1.1
OpenLDAP Software End User License Agreement
OpenPegasus License
PHP License, Version 3.01
Sun Microsystems Inc. Swing Graphical End User License Agreement
7-zip License


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

The 2020.03.2 Gen10 SPP contains updates pertaining to Customer Bulletin a00102358en_us.

This version addresses the vulnerability described in the bulletin that impacts Offline mode of update using bootable ISO of HPE Service Pack for ProLiant (SPP) on a Secure Boot mode enabled system.

 

This SPP also contains updates pertaining to:

  • Customer Bulletin a00097210en_us.  (Bulletin: HPE Smart Array SR Gen10 Controllers - FIRMWARE UPDATE REQUIRED to Prevent Potential Data Inconsistency on Select RAID Configurations Created with Smart Array Gen10 Firmware Version 1.98 through 2.62).
  • Customer Notice a00097789en_us with the exception of the HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2012 R2, Windows Server 2016, and Windows Server 2019 v106.12.6.0.  This driver can be found on HPE.com and on Custom Download.
  • When using HPE OneView prior to version 5.00.00 and the 2020.03.0 SPP, an error may be seen during FW update of iLO5. For additional information, please review CA a00094676en_us.

HPE StoreOnce Customers – Installation of the SPP can cause problems on StoreOnce systems.  Please go to the HPE Support Center at https://support.hpe.com/hpesc/public/home/result?qt=storeonce to find the appropriate StoreOnce update.

Components for the G7 and Gen8 server platforms are available in the Post-Production SPPs and can be downloaded from www.hpe.com/servers/SPP/download. For additional information, please refer to Reducing Server Updates

 

Note: Products sold prior to the separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. on November 1, 2015 may have a product name and model number that differ from current models.


Notes:

For a specific list of firmware and software smart components included with this ISO, please see the Service Pack for ProLiant Release Notes or Service Pack for ProLiant Contents Report.

For firmware and driver support for specific hardware, go to the following URL: http://www.hpe.com/support.


Supported Devices and Features:

For supported hardware, see the Service Pack for ProLiant Server Support Guide.


Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The 2020.03.2 SPP addresses Boothole Vulnerability.

Important

The 2020.03.2 Gen10 SPP contains updates pertaining to Customer Bulletin a00102358en_us.

This version addresses the vulnerability described in the bulletin that impacts Offline mode of update using bootable ISO of HPE Service Pack for ProLiant (SPP) on a Secure Boot mode enabled system.

 

This SPP also contains updates pertaining to:

  • Customer Bulletin a00097210en_us.  (Bulletin: HPE Smart Array SR Gen10 Controllers - FIRMWARE UPDATE REQUIRED to Prevent Potential Data Inconsistency on Select RAID Configurations Created with Smart Array Gen10 Firmware Version 1.98 through 2.62).
  • Customer Notice a00097789en_us with the exception of the HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2012 R2, Windows Server 2016, and Windows Server 2019 v106.12.6.0.  This driver can be found on HPE.com and on Custom Download.
  • When using HPE OneView prior to version 5.00.00 and the 2020.03.0 SPP, an error may be seen during FW update of iLO5. For additional information, please review CA a00094676en_us.

HPE StoreOnce Customers – Installation of the SPP can cause problems on StoreOnce systems.  Please go to the HPE Support Center at https://support.hpe.com/hpesc/public/home/result?qt=storeonce to find the appropriate StoreOnce update.

Components for the G7 and Gen8 server platforms are available in the Post-Production SPPs and can be downloaded from www.hpe.com/servers/SPP/download. For additional information, please refer to Reducing Server Updates

 

Note: Products sold prior to the separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. on November 1, 2015 may have a product name and model number that differ from current models.

Revision History

Version:2020.09.0 (5 Oct 2020)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The 2020.09.0 SPP Production release contains components supporting the ProLiant and Apollo Gen9, Gen10 and Gen10 Plus server platforms and options. This SPP release contains Smart Update Manager (SUM) 8.7.0 and driver support for:

  • Red Hat Enterprise Linux 7.8 and 8.2
  • SUSE Linux Enterprise Server 15 SP2 

This release now includes support for online update of VMware ESXi 7.0 and ESXi 7.0 U1 on Gen10 and later server platforms.

2020.09.0 SPP release supersedes the 2020.03.2 SPP.

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2020.03.2 (5 Sep 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The 2020.03.2 SPP addresses Boothole Vulnerability.


Version:2020.03.1 (31 Jul 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


*REMOVED* - Version Gen10 2020.03.1 is NO LONGER AVAILABLE for download. Replacement version will be available soon. For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102358en_us

Enhancements

None


Version:2020.03.0 (3 Apr 2020)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


**REMOVED** The 2020.03.0 Gen10 SPP Production release contains components supporting the ProLiant and Apollo Gen10 and Gen10 Plus server platforms and options. This SPP is a maintenance release containing Smart Update Manager (SUM) 8.5.0(A) and driver support for:

  • Red Hat Enterprise Linux 8.1
  • SUSE Linux Enterprise Server 12 SP5

2020.03.0 Gen10 SPP release supersedes the 2019.12.0 Gen10 SPP. 

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2019.12.2 (16 Sep 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The 2019.12.2 Gen10 SPP addresses BootHole Vulnerabilities.


Version:2019.12.1 (31 Jul 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


*REMOVED* - Version Gen10 2019.12.1 is NO LONGER AVAILABLE for download. Replacement version will be available soon. For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102358en_us

Enhancements

None


Version:2019.12.0 (6 Jan 2020)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


*REMOVED* - Version Gen10 2019.12.0 is NO LONGER AVAILABLE for download. For more information, please refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102358en_us

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The 2019.12.0 Gen10 SPP Production release contains components supporting the ProLiant and Apollo Gen10 and Gen10 Plus server platforms and options. 

The 2019.12.0 Gen10 SPP Production release provides support for:

  • Smart Update Manager 8.5.0(A)
  • Online Firmware support for Red Hat Enterprise Linux 8.0

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.