Printable version

Drivers & software

* RECOMMENDED * Online ROM Flash Component for Windows (x64) - MK000400KWDUK, VK000480KWDUE, MK000800KWDUL, VK000960KWDUF, MK001600KWDUN, and VK001920KWDUH Drives

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - PCIe NVMe Storage Disk
Version: HPK2(26 Jun 2018)
Operating System(s): Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Multi-part download
File name: cp033283.compsig (2.1 KB)
File name: cp033283.exe (6.8 MB)
File name: cp033283.md5 (48 Bytes)
This x64 Smart Component provides firmware for the following drive models: MK000400KWDUK, VK000480KWDUE, MK000800KWDUL, VK000960KWDUF, MK001600KWDUN, and VK001920KWDUH Drives

Enhancements/New Features:

  • Enhanced health data retrieval to provide wear status and temperature information.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

bb86e320f7401cb4a9aae5800e340206bdefce53396b0560679df7489c46e102 cp033283.compsig
66668d42815626e891ee035fde4f77530e715b846dbc9c59dc9addff2f7c930e cp033283.exe
d392c70f37b5835ab742daf677db943c085dd3248e65a7e225bc756e88c910a1 cp033283.md5

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To update firmware from Windows operating system on target server:

  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.

To use Smart Update Manager from the Service Pack for ProLiant:

  • Place the desired firmware to be updated in the directory, \<SPP root folder>\packages.
  • Run launch_sum.bat script which is found in the root folder of the SPP.
  • Follow the instructions on the screen.

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or a ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
  • Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.

Notes:

Deliverable Name:
      Online ROM Flash Component for Windows (x64) - MK000400KWDUK, VK000480KWDUE, MK000800KWDUL, VK000960KWDUF, MK001600KWDUN, and VK001920KWDUH Drives

Release Version and/or Date:
     HPK2

Last Recommended or Critical Version:
     HPK2

Previous Version of Firmware:
     NA

Firmware Dependency:
     None

Enhancements/New Features:

  • Enhanced health data retrieval to provide wear status and temperature information.

Problems Fixed:

  • During HPE ProLiant BL460c Gen10 server boot operation, the drive was not detected by the storage controller.

Known Issues:
     None


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or a ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
  • Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.

Problems Fixed:

  • During HPE ProLiant BL460c Gen10 server boot operation, the drive was not detected by the storage controller.
Version:HPK2 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or a ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
  • Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.

Problems Fixed:

  • During HPE ProLiant BL460c Gen10 server boot operation, the drive was not detected by the storage controller.
Enhancements

Enhancements/New Features:

  • Enhanced health data retrieval to provide wear status and temperature information.

Type: Firmware - PCIe NVMe Storage Disk
Version: HPK2(26 Jun 2018)
Operating System(s):
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016

Description

This x64 Smart Component provides firmware for the following drive models: MK000400KWDUK, VK000480KWDUE, MK000800KWDUL, VK000960KWDUF, MK001600KWDUN, and VK001920KWDUH Drives

Enhancements

Enhancements/New Features:

  • Enhanced health data retrieval to provide wear status and temperature information.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

bb86e320f7401cb4a9aae5800e340206bdefce53396b0560679df7489c46e102 cp033283.compsig
66668d42815626e891ee035fde4f77530e715b846dbc9c59dc9addff2f7c930e cp033283.exe
d392c70f37b5835ab742daf677db943c085dd3248e65a7e225bc756e88c910a1 cp033283.md5

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To update firmware from Windows operating system on target server:

  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.

To use Smart Update Manager from the Service Pack for ProLiant:

  • Place the desired firmware to be updated in the directory, \<SPP root folder>\packages.
  • Run launch_sum.bat script which is found in the root folder of the SPP.
  • Follow the instructions on the screen.

Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or a ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
  • Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.

Notes:

Deliverable Name:
      Online ROM Flash Component for Windows (x64) - MK000400KWDUK, VK000480KWDUE, MK000800KWDUL, VK000960KWDUF, MK001600KWDUN, and VK001920KWDUH Drives

Release Version and/or Date:
     HPK2

Last Recommended or Critical Version:
     HPK2

Previous Version of Firmware:
     NA

Firmware Dependency:
     None

Enhancements/New Features:

  • Enhanced health data retrieval to provide wear status and temperature information.

Problems Fixed:

  • During HPE ProLiant BL460c Gen10 server boot operation, the drive was not detected by the storage controller.

Known Issues:
     None


Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or a ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
  • Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.

Problems Fixed:

  • During HPE ProLiant BL460c Gen10 server boot operation, the drive was not detected by the storage controller.

Revision History

Version:HPK2 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or a ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
  • Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.

Problems Fixed:

  • During HPE ProLiant BL460c Gen10 server boot operation, the drive was not detected by the storage controller.
Enhancements

Enhancements/New Features:

  • Enhanced health data retrieval to provide wear status and temperature information.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.