Printable version

Drivers & software

* RECOMMENDED * Online ROM Flash Component for Windows x64 - HPE Integrated Lights-Out 4

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - Lights-Out Management
Version: 2.70(14 May 2019)
Operating System(s): Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019
File name: cp038075.exe (13 MB)
This component provides and installs an updated version of firmware for the iLO 4 Management Processor allowing for continued management support of your Server.

  • HTML5 Remote Console
  • SNMP trap 18015 cpqNicAllLinksDown (all Links down on a network adapter)
  • Confirmation dialog box for Remote Console power button actions
  • New Key Manager software support:
    • SafeNet AT KeySecure G350v 8.6.0 and later
    • Gemalto SafeNet KeySecure 8.9.0 and later
  • Active Health System updates:
    • Support for the InfoSight Optimized Active Health System download.
    • iLO nonvolatile flash memory wear data logging.
  • Embedded remote support updates:
    • Modified the Active Health System log filename used for Embedded Remote Support uploads.
    • Updated Embedded Remote Support service events for compatibility with Windows Server 2019.
  • Support for hyphens in the State and City or Locality boxes in Certificate Signing requests.  

Prerequisites:

Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
for best performance:

  • RESTful Interface Tool (iLOREST) 2.3
  • HPQLOCFG v5.2 
  • Lights-Out XML Scripting Sample bundle 5.10.0
  • HPONCFG Windows 5.3.0
  • HPONCFG Linux 5.4.0
  • LOCFG v5.10.0
  • HPLOMIG 5.2.0

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

970230210c64196836bc4c870463c5eeab7b899987f8a972e13ed8e615a20024 cp038075.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Install the firmware using one of these options:

  • Run the Component on the host to be updated.
    The component will update the iLO 4 firmware and reset the iLO 4 processor.
     
  • Extract the firmware from the component.  This will place the firmware image file, iLO4_yyy.bin (where yyy represents the firmware version) in the target directory.  You now have these options:
    • Login to iLO 4, navigate to the Update Firmware page, and update the firmware from there.
    • Use the HPE Lights-Out Configuration Utility, CPQLOCFG, and RIBCL/XML scripts to update iLO 4 across the network.
    • Use the HPE Online Lights-Out Configuration utility, HPONCFG, and RIBCL/XML scripts to update iLO 4 from the supported host OS.
    • Use the Directory Migration Utility, contained in the HPE Directories support for Management Processors,  The Windows utility supports network discovery of lights-out processors, import/export, as well as bulk firmware update, and does not require directory migration.

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

IPv6 network communications - Dedicated network connection only
     Supported Networking Features
                IPv6 Static Address Assignment
                IPv6 SLAAC Address Assignment
                IPv6 Static Route Assignment
                IPv6 Static Default Gateway Entry
                DHCPv6 Stateful Address Assignment
                DHCPv6 Stateless DNS, Domain Name, and NTP Configuration
                Integrated Remote Console
                OA Single Sign-On
                HPE-SIM Single Sign-On
                Web Server
                SSH Server
                SNTP Client
                DDNS Client
                RIBCL over IPv6
                SNMP
                AlertMail
                Remote Syslog
                WinDBG Support
                CPQLOCFG/HPLOMIG over an IPv6 connection
                Scriptable Virtual Media
                CLI/RIBCL Key Import over IPv6
                Authentication using LDAP and Kerberos over IPv6
                iLO Federation
     Networking Features not supported by IPv6 in this release
                IPv6 Over Shared Network Port Connections
                IPMI
                NETBIOS-WINS
                Enterprise Secure Key Manager (ESKM) Support
                Embedded Remote Support (ERS)


Notes:

 

iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

http://www.hpe.com/info/ilo

Select your lights-out product, then support & documents, then manuals.
 

  • Check the online help for additional information about how to use features. 
    Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following issues are resolved in this version:

  • Linux or VMware systems only: An OS exception or memory corruption might occur when using the hpilo driver.
  • Automatic restoration of the iLO backup configuration does not work correctly.
  • Redfish calls with iLO 4 2.61 sometimes include an invalid UTF-8 character in the power supply part number.
  • The REST call "ilorest -d serverlogs --selectlog=IML --clearlog rc 255" fails when it should succeed.

SECURITY: 

  • HPESBHF03917

  For the latest security bulletins and vulnerabilities, please visit: 
  https://support.hpe.com/hpesc/public/home
  
Security best practices:

  Please refer to the HPE Integrated Lights-Out Security Technology Brief for the latest on security best practices at:
  http://www.hpe.com/support/iLO4_security_en

IPv6 network communications - Dedicated network connection only
     Supported Networking Features
                IPv6 Static Address Assignment
                IPv6 SLAAC Address Assignment
                IPv6 Static Route Assignment
                IPv6 Static Default Gateway Entry
                DHCPv6 Stateful Address Assignment
                DHCPv6 Stateless DNS, Domain Name, and NTP Configuration
                Integrated Remote Console
                OA Single Sign-On
                HPE-SIM Single Sign-On
                Web Server
                SSH Server
                SNTP Client
                DDNS Client
                RIBCL over IPv6
                SNMP
                AlertMail
                Remote Syslog
                WinDBG Support
                CPQLOCFG/HPLOMIG over an IPv6 connection
                Scriptable Virtual Media
                CLI/RIBCL Key Import over IPv6
                Authentication using LDAP and Kerberos over IPv6
                iLO Federation
     Networking Features not supported by IPv6 in this release
                IPv6 Over Shared Network Port Connections
                IPMI
                NETBIOS-WINS
                Enterprise Secure Key Manager (ESKM) Support
                Embedded Remote Support (ERS)

Version:2.70 (14 May 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following issues are resolved in this version:

  • Linux or VMware systems only: An OS exception or memory corruption might occur when using the hpilo driver.
  • Automatic restoration of the iLO backup configuration does not work correctly.
  • Redfish calls with iLO 4 2.61 sometimes include an invalid UTF-8 character in the power supply part number.
  • The REST call "ilorest -d serverlogs --selectlog=IML --clearlog rc 255" fails when it should succeed.

SECURITY: 

  • HPESBHF03917

  For the latest security bulletins and vulnerabilities, please visit: 
  https://support.hpe.com/hpesc/public/home
  
Security best practices:

  Please refer to the HPE Integrated Lights-Out Security Technology Brief for the latest on security best practices at:
  http://www.hpe.com/support/iLO4_security_en

Enhancements

  • HTML5 Remote Console
  • SNMP trap 18015 cpqNicAllLinksDown (all Links down on a network adapter)
  • Confirmation dialog box for Remote Console power button actions
  • New Key Manager software support:
    • SafeNet AT KeySecure G350v 8.6.0 and later
    • Gemalto SafeNet KeySecure 8.9.0 and later
  • Active Health System updates:
    • Support for the InfoSight Optimized Active Health System download.
    • iLO nonvolatile flash memory wear data logging.
  • Embedded remote support updates:
    • Modified the Active Health System log filename used for Embedded Remote Support uploads.
    • Updated Embedded Remote Support service events for compatibility with Windows Server 2019.
  • Support for hyphens in the State and City or Locality boxes in Certificate Signing requests.  

Type: Firmware - Lights-Out Management
Version: 2.70(14 May 2019)
Operating System(s):
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019

Description

This component provides and installs an updated version of firmware for the iLO 4 Management Processor allowing for continued management support of your Server.

Enhancements

  • HTML5 Remote Console
  • SNMP trap 18015 cpqNicAllLinksDown (all Links down on a network adapter)
  • Confirmation dialog box for Remote Console power button actions
  • New Key Manager software support:
    • SafeNet AT KeySecure G350v 8.6.0 and later
    • Gemalto SafeNet KeySecure 8.9.0 and later
  • Active Health System updates:
    • Support for the InfoSight Optimized Active Health System download.
    • iLO nonvolatile flash memory wear data logging.
  • Embedded remote support updates:
    • Modified the Active Health System log filename used for Embedded Remote Support uploads.
    • Updated Embedded Remote Support service events for compatibility with Windows Server 2019.
  • Support for hyphens in the State and City or Locality boxes in Certificate Signing requests.  

Installation Instructions

Prerequisites:

Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
for best performance:

  • RESTful Interface Tool (iLOREST) 2.3
  • HPQLOCFG v5.2 
  • Lights-Out XML Scripting Sample bundle 5.10.0
  • HPONCFG Windows 5.3.0
  • HPONCFG Linux 5.4.0
  • LOCFG v5.10.0
  • HPLOMIG 5.2.0

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

970230210c64196836bc4c870463c5eeab7b899987f8a972e13ed8e615a20024 cp038075.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Install the firmware using one of these options:

  • Run the Component on the host to be updated.
    The component will update the iLO 4 firmware and reset the iLO 4 processor.
     
  • Extract the firmware from the component.  This will place the firmware image file, iLO4_yyy.bin (where yyy represents the firmware version) in the target directory.  You now have these options:
    • Login to iLO 4, navigate to the Update Firmware page, and update the firmware from there.
    • Use the HPE Lights-Out Configuration Utility, CPQLOCFG, and RIBCL/XML scripts to update iLO 4 across the network.
    • Use the HPE Online Lights-Out Configuration utility, HPONCFG, and RIBCL/XML scripts to update iLO 4 from the supported host OS.
    • Use the Directory Migration Utility, contained in the HPE Directories support for Management Processors,  The Windows utility supports network discovery of lights-out processors, import/export, as well as bulk firmware update, and does not require directory migration.

Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

IPv6 network communications - Dedicated network connection only
     Supported Networking Features
                IPv6 Static Address Assignment
                IPv6 SLAAC Address Assignment
                IPv6 Static Route Assignment
                IPv6 Static Default Gateway Entry
                DHCPv6 Stateful Address Assignment
                DHCPv6 Stateless DNS, Domain Name, and NTP Configuration
                Integrated Remote Console
                OA Single Sign-On
                HPE-SIM Single Sign-On
                Web Server
                SSH Server
                SNTP Client
                DDNS Client
                RIBCL over IPv6
                SNMP
                AlertMail
                Remote Syslog
                WinDBG Support
                CPQLOCFG/HPLOMIG over an IPv6 connection
                Scriptable Virtual Media
                CLI/RIBCL Key Import over IPv6
                Authentication using LDAP and Kerberos over IPv6
                iLO Federation
     Networking Features not supported by IPv6 in this release
                IPv6 Over Shared Network Port Connections
                IPMI
                NETBIOS-WINS
                Enterprise Secure Key Manager (ESKM) Support
                Embedded Remote Support (ERS)


Notes:

 

iLO 4 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

http://www.hpe.com/info/ilo

Select your lights-out product, then support & documents, then manuals.
 

  • Check the online help for additional information about how to use features. 
    Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.

Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following issues are resolved in this version:

  • Linux or VMware systems only: An OS exception or memory corruption might occur when using the hpilo driver.
  • Automatic restoration of the iLO backup configuration does not work correctly.
  • Redfish calls with iLO 4 2.61 sometimes include an invalid UTF-8 character in the power supply part number.
  • The REST call "ilorest -d serverlogs --selectlog=IML --clearlog rc 255" fails when it should succeed.

SECURITY: 

  • HPESBHF03917

  For the latest security bulletins and vulnerabilities, please visit: 
  https://support.hpe.com/hpesc/public/home
  
Security best practices:

  Please refer to the HPE Integrated Lights-Out Security Technology Brief for the latest on security best practices at:
  http://www.hpe.com/support/iLO4_security_en

Important

IPv6 network communications - Dedicated network connection only
     Supported Networking Features
                IPv6 Static Address Assignment
                IPv6 SLAAC Address Assignment
                IPv6 Static Route Assignment
                IPv6 Static Default Gateway Entry
                DHCPv6 Stateful Address Assignment
                DHCPv6 Stateless DNS, Domain Name, and NTP Configuration
                Integrated Remote Console
                OA Single Sign-On
                HPE-SIM Single Sign-On
                Web Server
                SSH Server
                SNTP Client
                DDNS Client
                RIBCL over IPv6
                SNMP
                AlertMail
                Remote Syslog
                WinDBG Support
                CPQLOCFG/HPLOMIG over an IPv6 connection
                Scriptable Virtual Media
                CLI/RIBCL Key Import over IPv6
                Authentication using LDAP and Kerberos over IPv6
                iLO Federation
     Networking Features not supported by IPv6 in this release
                IPv6 Over Shared Network Port Connections
                IPMI
                NETBIOS-WINS
                Enterprise Secure Key Manager (ESKM) Support
                Embedded Remote Support (ERS)

Revision History

Version:2.70 (14 May 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following issues are resolved in this version:

  • Linux or VMware systems only: An OS exception or memory corruption might occur when using the hpilo driver.
  • Automatic restoration of the iLO backup configuration does not work correctly.
  • Redfish calls with iLO 4 2.61 sometimes include an invalid UTF-8 character in the power supply part number.
  • The REST call "ilorest -d serverlogs --selectlog=IML --clearlog rc 255" fails when it should succeed.

SECURITY: 

  • HPESBHF03917

  For the latest security bulletins and vulnerabilities, please visit: 
  https://support.hpe.com/hpesc/public/home
  
Security best practices:

  Please refer to the HPE Integrated Lights-Out Security Technology Brief for the latest on security best practices at:
  http://www.hpe.com/support/iLO4_security_en

Enhancements

  • HTML5 Remote Console
  • SNMP trap 18015 cpqNicAllLinksDown (all Links down on a network adapter)
  • Confirmation dialog box for Remote Console power button actions
  • New Key Manager software support:
    • SafeNet AT KeySecure G350v 8.6.0 and later
    • Gemalto SafeNet KeySecure 8.9.0 and later
  • Active Health System updates:
    • Support for the InfoSight Optimized Active Health System download.
    • iLO nonvolatile flash memory wear data logging.
  • Embedded remote support updates:
    • Modified the Active Health System log filename used for Embedded Remote Support uploads.
    • Updated Embedded Remote Support service events for compatibility with Windows Server 2019.
  • Support for hyphens in the State and City or Locality boxes in Certificate Signing requests.  

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.