Printable version

Drivers & software

HPE SYNERGY SOFTWARE RELEASES: COMPOSER 4.10.05 and IMAGE STREAMER 4.10.05

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware (Entitlement Required)
Version: Comp4.10.05-ImgStmr4.10.05(30 Apr 2019)
Operating System(s): OS Independent
Welcome to the support page for the HPE Synergy Management combination comprised of HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05. Open the IMPORTANT tab on this page to determine HPE Synergy Custom SPPs that are available for use with this HPE Synergy Management combination.

What's new

There are several enhancements for the HPE Synergy Management combination comprised of HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05.

For information on key fixes, see the Fixes tab.

HPE Synergy Composer 4.10.05

For a complete list of fixes, see the Fixes tab.

HPE Synergy Image Streamer 4.10.05

For a complete list of fixes, see the Fixes tab.

HPE Synergy Custom SPP SPP 2018.11.20190611 - June 2019

HPE Synergy Custom SPP 2018.11.20190611 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

For more information, see the Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

 

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

7affc7773ab80652f9bcaf89df1fce9f71bafcd8c8c3c909c4c5b1d0d61f0e3c ICM-SynergySWComposer4.10.05-ImageStreamer4.10.05.txt

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

HPE Synergy Management combination update

Review the following documentation before updating to HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05.

For information on updating HPE Synergy, see the (Hewlett Packard Enterprise Information Library).

The HPE Synergy Software Overview Guide provides detailed references and overviews of the software and configuration utilities to support HPE Synergy. The guide is task-based and covers the documentation and resources for all supported software and configuration utilities available for:

  • HPE Synergy setup and configuration

  • OS deployment

  • Firmware updates

  • Troubleshooting

  • Remote support

Best Practices for HPE Synergy Firmware and Driver Updates provides information for updating HPE Synergy firmware and drivers through HPE Synergy Composer, powered by HPE OneView.

System ROM installation

HPE Synergy supports updating System ROMs for HPE Synergy Compute Modules independently of installing the System ROMs included in the HPE Synergy Custom SPP.

The latest available System ROMs have been qualified against all HPE Synergy configurations. Updating HPE Synergy Compute Modules to the latest System ROMs is supported.

For more information on installing System ROMs, see Customer Notification a00050817en_us.

Links

For HPE Synergy Composer and Image Streamer Upgrade Paths

For information on the required HPE Synergy Management combination upgrade paths, see the HPE Synergy Upgrade Table.

HPE Synergy Firmware Comparison Tool

To compare the contents of HPE Synergy Custom SPPs, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Firmware Feature Comparison Table

For information on new supported HPE Synergy features, see the HPE Synergy Custom SPPs, see the HPE Synergy Firmware Feature Comparison Table.

VMware Support for HPE Synergy Software Releases

HPE Synergy Custom SPP 2018.03.20180928 and 2018.03.20180628 ESXi driver installation:

  • To install the required ESXi 6.0 and 6.5 drivers into the following HPE Custom Images for VMware ESXi, see Customer Advisory a00045994.
    • HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018

    • HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018

    • HPE Custom Image for VMware ESXi 6.7

    • HPE Custom Image for VMware ESXi 6.5 U2 May 2018

    The required driver are contained in the 2018.03.20180628 HPE Synergy Custom SPP.

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.

    • When deployed, computer connectivity to FC storage through HPE VC SE Synergy 40GB F8 Module is not supported.

    • HPE Synergy Image Streamer is not supported.

HPE Synergy documentation

Reference Best Practices for HPE Synergy Firmware and Driver Updates.

http://www.hpe.com/info/synergy-docs


End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

HPE Synergy Composer 4.10.05

  • Resolves an issue where the downlink port speed for an HPE Virtual Connect SE 16Gb FC Modules for HPE Synergy module is reset to Auto when the configuration is reapplied or LIG/LI operations are performed.

  • Resolves a null pointer exception error in a database job. This error would result in disk space issues, which impact backups, patches, and other normal HPE OneView operations.

  • Resolves an issue where HPE OneView stops running and does not restart due to database startup failure.

  • Resolves an issue where HPE OneView displays the following error: The iLO in <enclosure, bay> is not configured with the IPv4 address allocated to it by the logical enclosure.

  • Resolves an issue where HPE OneView assigns duplicate IP addresses from a pool after a network disruption.

For a complete list of fixes, see the HPE Synergy Composer 4.10.05 Release Notes.

HPE Synergy Image Streamer 4.10.05

  • Corrects an issue where OS volume deployment from a secondary appliance pair might fail.

  • Corrects an issue where a large number of temporary files created over 6 months or more would prevent proper operation.

  • Corrects issues related to management appliance trust establishment after an appliance reimage process.

For a complete list of fixes, see the HPE Synergy Image Streamer 4.10.05 Release Notes.

VMware support for HPE Synergy Management combinations

VMware support depends on HPE Synergy Custom SPP versions. Review the following information for HPE VMware Custom Image support and limitations based on Synergy Custom SPP releases.

VMware support for HPE Synergy Custom SPP 2018.11.20190611 and HPE Synergy Custom SPP 2018.11.20181205

This HPE Synergy Custom SPP is based on the 2018.11.0 core Service Pack for ProLiant (SPP) and is supported with the following HPE Customer Images for VMware.

  • HPE Custom Image for VMware ESXi 6.0U3 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.5U1 - Feb 2018

    To remain on HPE Custom Image for VMware ESXi 6.5U1, obtain the latest drivers from http://vibsdepot.hpe.com or call support.

  • HPE Custom Image for VMware ESXi 6.5U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.7 - Sept 2018
    • No restrictions for Fibre Channel over Ethernet (FCoE).

    • HPE Synergy Image Streamer is not supported.

    • For online updates using the Service Pack for ProLiant 2018.11.0, updates of Gen9 servers running VMware ESXi 6.7 and 6.7U1 are not supported due to an issue with the VMware Common Information Model (CIM) interface on VMware ESXi 6.7.

      For more information, see Customer Advisory: a00050181en_us.

  • HPE Custom Image for VMWare ESXi 6.7U1 - Oct 2018

  • HPE Smart Array Gen10 Controllers Firmware 1.99 and smartpqi driver 1.0.3.2309 are delivered as part of HPE Synergy Custom SPP 2018.11.20190611 and are certified for use in a VMware vSAN configuration for Gen10 compute modules.

Drivers for Gen10 compute modules running VMware ESXi 6.5 or 6.7 may be updated by extracting the appropriate package from the HPE Synergy Custom SPP and applying it manually or using VMware tools.  HPE Integrated Smart Update Tools (iSUT) may be used for online updates of VMware ESXi 6.7.

VMware support - HPE Synergy Custom SPP 2018.09.20180919 - Oct 2018

This HPE Synergy Custom SPP is based on the 2018.09 core Service Pack for ProLiant (SPP) and is supported with the following HPE Custom Images for VMware.

  • HPE Custom Image for VMware ESXi 6.0U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.5U1 - Feb 2018

    NOTE: To stay on this VMware version, obtain the latest drivers from HPE Software Delivery Repository
  • HPE Custom Image for VMware ESXi 6.5U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.7 - Sept 2018

    • No restrictions for FCOE

    • HPE Synergy Image Streamer is not supported.

VMware Support for HPE Synergy Custom SPP 2018.06.20180709

This HPE Synergy Custom SPP is based on the 2018.06 core Service Pack for ProLiant (SPP) and is supported with the following HPE Custom Images for VMware.

  • HPE Custom Image for VMware ESXi 6.5 U2 June 2018

  • HPE Custom Image for VMware ESXi 6.7 June 2018

  • HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018

  • HPE Custom Image for VMware ESXi 6.0 U3 June 2018

VMware 6.7 Limitations for this Synergy Software Release:

  • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.

  • When deployed, compute connectivity to FC storage through HPE VC SE Synergy 40GB F8 Module is not supported.

  • HPE Image Streamer is not supported.

Supported HPE Synergy Custom SPPs

The following HPE Custom Images are supported with this HPE Synergy Management combination and HPE Synergy Custom SPP.

HPE Synergy Custom SPP 2018.11.20190611- June 2019

HPE Synergy Custom SPP 2018.11.20190611 is built on HPE Synergy Custom SPP 2018.11.20181205 and provides the latest enhancements for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

  • Includes Gen10 Smart Array controllers Firmware 1.99 and Smartpqi Driver 1.0.3.2309.
  • Includes System ROM 2.04.

HPE Synergy Custom SPP 2018.11.20181205- Nov 2018

HPE Synergy Custom SPP 2018.11.20181205 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

HPE Synergy Custom SPP 2018.09.20180919- Oct 2018

The HPE Synergy Custom SPP 2018.09.20180919 is based on the 2018.09 core SPP and provides the latest hot fixes for Synergy firmware components.

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018

HPE Synergy Custom SPP 2018.03.20180928 is based on the 2018.03 core Service Pack for ProLiant (SPP) and provides the latest hot fixes for the following HPE Synergy components.

  • HPE Smart Array E208i-p SR/ P408i-c SR/ P204i-c SR/ P416ie-m SR Gen10 Controllers

  • HPE Integrated Lights-Out 4 (HPE iLO 4) and HPE Integrated Lights-Out 5 (HPE iLO 5)

  • HPE Synergy 2820C 10Gb and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers

  • HDD FW

  • HPE VC SE 40Gb F8 Module


Notes:

Links

For HPE Synergy Composer and Image Streamer Upgrade Paths

For information on the required HPE Synergy Management combination upgrade paths, see the HPE Synergy Upgrade Table.

HPE Synergy Firmware Comparison Tool

To compare the contents of HPE Synergy Custom SPPs, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Firmware Feature Comparison Table

For information on new supported HPE Synergy features, see the HPE Synergy Custom SPPs, see the HPE Synergy Firmware Feature Comparison Table.

VMware Support for HPE Synergy Software Releases

Additional HPE Synergy Custom SPPs supported by this Synergy Management combination

Additional HPE Synergy Custom SPPs that support HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05 Management combination are listed below.

For information on the most current HPE Synergy Custom SPPs supported by this Management combination, see the Important tab.

  • HPE Synergy Custom SPP 2018.06.20180709 - July 2018

    Replaces HPE Synergy Custom SPP 2018.06.20180619 to provide latest security fixes for Gen9 and Gen10 Compute Modules and address upgrade issues with HPE Synergy 10Gb Interconnect Link Module (10Gb ILM).

  • HPE Synergy Custom SPP 2018.03.20180628 - June 2018

    Replaces HPE Synergy Custom SPP 2018.03.20180508 to address HPE Synergy Frame Link Module and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Reference the following for a list of fixes in the HPE Synergy HPE Synergy Management combination comprised of HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05.

HPE Synergy Composer 4.10.05

  • Resolves an issue where the downlink port speed for an HPE Virtual Connect SE 16Gb FC Modules for HPE Synergy module is reset to Auto when the configuration is reapplied or LIG/LI operations are performed.

  • Resolves a null pointer exception error in a database job. This error would result in disk space issues, which impact backups, patches, and other normal HPE OneView operations.

  • Resolves an issue where HPE OneView stops running and does not restart due to database startup failure.

  • Resolves an issue where HPE OneView displays the following error: The iLO in <enclosure, bay> is not configured with the IPv4 address allocated to it by the logical enclosure.

  • Resolves an issue where HPE OneView assigns duplicate IP addresses from a pool after a network disruption.

For a complete list of fixes, see the HPE Synergy Composer 4.10.05 Release Notes.

HPE Synergy Image Streamer 4.10.05

  • Corrects an issue where OS volume deployment from a secondary appliance pair might fail.

  • Corrects an issue where a large number of temporary files created over 6 months or more would prevent proper operation.

  • Corrects issues related to management appliance trust establishment after an appliance reimage process.

For a complete list of fixes, see the HPE Synergy Image Streamer 4.10.05 Release Notes.

HPE Synergy Custom SPP SPP 2018.11.20190611 - June 2019

HPE Synergy Custom SPP 2018.11.20190611 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

HPE Synergy Custom SPP 2018.11.20190611 includes Smart Array Gen10 Smart Array controllers Firmware 1.99 and Smartpqi Driver 1.0.3.2309. 

For more information, see the Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

System ROM updates

Updated System ROM firmware is available to address an issue where the system may experience a higher rate of Uncorrectable Memory errors or boot time Memory training issues with Intel Xeon Scalable Performance processors.

This issue was first introduced with System ROM version 2.00.

Hewlett Packard Enterprise recommends that any customer experiencing a memory issue immediately update to this version of the system ROM before replacing any components. This issue is not unique to HPE servers.

Synergy customers can do one of the following.

  • Install or upgrade to HPE Synergy Custom SPP 2018.11.20190611.

For more information, see the Release Notes tab.

  • Download and install the Updated System ROM firmware. For more information, see the Installation Notes tab.

For more information on the Updated System ROM firmware, see Customer notification a00072625en_us.

HPE Synergy documentation

Reference Best Practices for HPE Synergy Firmware and Driver Updates.

http://www.hpe.com/info/synergy-docs

HPE Synergy Composer 4.10.05

  • Resolves an issue where the downlink port speed for an HPE Virtual Connect SE 16Gb FC Modules for HPE Synergy module is reset to Auto when the configuration is reapplied or LIG/LI operations are performed.

  • Resolves a null pointer exception error in a database job. This error would result in disk space issues, which impact backups, patches, and other normal HPE OneView operations.

  • Resolves an issue where HPE OneView stops running and does not restart due to database startup failure.

  • Resolves an issue where HPE OneView displays the following error: The iLO in <enclosure, bay> is not configured with the IPv4 address allocated to it by the logical enclosure.

  • Resolves an issue where HPE OneView assigns duplicate IP addresses from a pool after a network disruption.

For a complete list of fixes, see the HPE Synergy Composer 4.10.05 Release Notes.

HPE Synergy Image Streamer 4.10.05

  • Corrects an issue where OS volume deployment from a secondary appliance pair might fail.

  • Corrects an issue where a large number of temporary files created over 6 months or more would prevent proper operation.

  • Corrects issues related to management appliance trust establishment after an appliance reimage process.

For a complete list of fixes, see the HPE Synergy Image Streamer 4.10.05 Release Notes.

VMware support for HPE Synergy Management combinations

VMware support depends on HPE Synergy Custom SPP versions. Review the following information for HPE VMware Custom Image support and limitations based on Synergy Custom SPP releases.

VMware support for HPE Synergy Custom SPP 2018.11.20190611 and HPE Synergy Custom SPP 2018.11.20181205

This HPE Synergy Custom SPP is based on the 2018.11.0 core Service Pack for ProLiant (SPP) and is supported with the following HPE Customer Images for VMware.

  • HPE Custom Image for VMware ESXi 6.0U3 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.5U1 - Feb 2018

    To remain on HPE Custom Image for VMware ESXi 6.5U1, obtain the latest drivers from http://vibsdepot.hpe.com or call support.

  • HPE Custom Image for VMware ESXi 6.5U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.7 - Sept 2018
    • No restrictions for Fibre Channel over Ethernet (FCoE).

    • HPE Synergy Image Streamer is not supported.

    • For online updates using the Service Pack for ProLiant 2018.11.0, updates of Gen9 servers running VMware ESXi 6.7 and 6.7U1 are not supported due to an issue with the VMware Common Information Model (CIM) interface on VMware ESXi 6.7.

      For more information, see Customer Advisory: a00050181en_us.

  • HPE Custom Image for VMWare ESXi 6.7U1 - Oct 2018

  • HPE Smart Array Gen10 Controllers Firmware 1.99 and smartpqi driver 1.0.3.2309 are delivered as part of HPE Synergy Custom SPP 2018.11.20190611 and are certified for use in a VMware vSAN configuration for Gen10 compute modules.

Drivers for Gen10 compute modules running VMware ESXi 6.5 or 6.7 may be updated by extracting the appropriate package from the HPE Synergy Custom SPP and applying it manually or using VMware tools.  HPE Integrated Smart Update Tools (iSUT) may be used for online updates of VMware ESXi 6.7.

VMware support - HPE Synergy Custom SPP 2018.09.20180919 - Oct 2018

This HPE Synergy Custom SPP is based on the 2018.09 core Service Pack for ProLiant (SPP) and is supported with the following HPE Custom Images for VMware.

  • HPE Custom Image for VMware ESXi 6.0U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.5U1 - Feb 2018

    NOTE: To stay on this VMware version, obtain the latest drivers from HPE Software Delivery Repository
  • HPE Custom Image for VMware ESXi 6.5U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.7 - Sept 2018

    • No restrictions for FCOE

    • HPE Synergy Image Streamer is not supported.

VMware Support for HPE Synergy Custom SPP 2018.06.20180709

This HPE Synergy Custom SPP is based on the 2018.06 core Service Pack for ProLiant (SPP) and is supported with the following HPE Custom Images for VMware.

  • HPE Custom Image for VMware ESXi 6.5 U2 June 2018

  • HPE Custom Image for VMware ESXi 6.7 June 2018

  • HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018

  • HPE Custom Image for VMware ESXi 6.0 U3 June 2018

VMware 6.7 Limitations for this Synergy Software Release:

  • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.

  • When deployed, compute connectivity to FC storage through HPE VC SE Synergy 40GB F8 Module is not supported.

  • HPE Image Streamer is not supported.

Supported HPE Synergy Custom SPPs

The following HPE Custom Images are supported with this HPE Synergy Management combination and HPE Synergy Custom SPP.

HPE Synergy Custom SPP 2018.11.20190611- June 2019

HPE Synergy Custom SPP 2018.11.20190611 is built on HPE Synergy Custom SPP 2018.11.20181205 and provides the latest enhancements for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

  • Includes Gen10 Smart Array controllers Firmware 1.99 and Smartpqi Driver 1.0.3.2309.
  • Includes System ROM 2.04.

HPE Synergy Custom SPP 2018.11.20181205- Nov 2018

HPE Synergy Custom SPP 2018.11.20181205 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

HPE Synergy Custom SPP 2018.09.20180919- Oct 2018

The HPE Synergy Custom SPP 2018.09.20180919 is based on the 2018.09 core SPP and provides the latest hot fixes for Synergy firmware components.

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018

HPE Synergy Custom SPP 2018.03.20180928 is based on the 2018.03 core Service Pack for ProLiant (SPP) and provides the latest hot fixes for the following HPE Synergy components.

  • HPE Smart Array E208i-p SR/ P408i-c SR/ P204i-c SR/ P416ie-m SR Gen10 Controllers

  • HPE Integrated Lights-Out 4 (HPE iLO 4) and HPE Integrated Lights-Out 5 (HPE iLO 5)

  • HPE Synergy 2820C 10Gb and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers

  • HDD FW

  • HPE VC SE 40Gb F8 Module

Version:Comp4.10.05-ImgStmr4.10.05 (30 Apr 2019)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Reference the following for a list of fixes in the HPE Synergy HPE Synergy Management combination comprised of HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05.

HPE Synergy Composer 4.10.05

  • Resolves an issue where the downlink port speed for an HPE Virtual Connect SE 16Gb FC Modules for HPE Synergy module is reset to Auto when the configuration is reapplied or LIG/LI operations are performed.

  • Resolves a null pointer exception error in a database job. This error would result in disk space issues, which impact backups, patches, and other normal HPE OneView operations.

  • Resolves an issue where HPE OneView stops running and does not restart due to database startup failure.

  • Resolves an issue where HPE OneView displays the following error: The iLO in <enclosure, bay> is not configured with the IPv4 address allocated to it by the logical enclosure.

  • Resolves an issue where HPE OneView assigns duplicate IP addresses from a pool after a network disruption.

For a complete list of fixes, see the HPE Synergy Composer 4.10.05 Release Notes.

HPE Synergy Image Streamer 4.10.05

  • Corrects an issue where OS volume deployment from a secondary appliance pair might fail.

  • Corrects an issue where a large number of temporary files created over 6 months or more would prevent proper operation.

  • Corrects issues related to management appliance trust establishment after an appliance reimage process.

For a complete list of fixes, see the HPE Synergy Image Streamer 4.10.05 Release Notes.

HPE Synergy Custom SPP SPP 2018.11.20190611 - June 2019

HPE Synergy Custom SPP 2018.11.20190611 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

HPE Synergy Custom SPP 2018.11.20190611 includes Smart Array Gen10 Smart Array controllers Firmware 1.99 and Smartpqi Driver 1.0.3.2309. 

For more information, see the Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

System ROM updates

Updated System ROM firmware is available to address an issue where the system may experience a higher rate of Uncorrectable Memory errors or boot time Memory training issues with Intel Xeon Scalable Performance processors.

This issue was first introduced with System ROM version 2.00.

Hewlett Packard Enterprise recommends that any customer experiencing a memory issue immediately update to this version of the system ROM before replacing any components. This issue is not unique to HPE servers.

Synergy customers can do one of the following.

  • Install or upgrade to HPE Synergy Custom SPP 2018.11.20190611.

For more information, see the Release Notes tab.

  • Download and install the Updated System ROM firmware. For more information, see the Installation Notes tab.

For more information on the Updated System ROM firmware, see Customer notification a00072625en_us.

HPE Synergy documentation

Reference Best Practices for HPE Synergy Firmware and Driver Updates.

http://www.hpe.com/info/synergy-docs

Enhancements

What's new

There are several enhancements for the HPE Synergy Management combination comprised of HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05.

For information on key fixes, see the Fixes tab.

HPE Synergy Composer 4.10.05

For a complete list of fixes, see the Fixes tab.

HPE Synergy Image Streamer 4.10.05

For a complete list of fixes, see the Fixes tab.

HPE Synergy Custom SPP SPP 2018.11.20190611 - June 2019

HPE Synergy Custom SPP 2018.11.20190611 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

For more information, see the Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

 


Type: Firmware (Entitlement Required)
Version: Comp4.10.05-ImgStmr4.10.05(30 Apr 2019)
Operating System(s):
OS Independent

Description

Welcome to the support page for the HPE Synergy Management combination comprised of HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05. Open the IMPORTANT tab on this page to determine HPE Synergy Custom SPPs that are available for use with this HPE Synergy Management combination.

Enhancements

What's new

There are several enhancements for the HPE Synergy Management combination comprised of HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05.

For information on key fixes, see the Fixes tab.

HPE Synergy Composer 4.10.05

For a complete list of fixes, see the Fixes tab.

HPE Synergy Image Streamer 4.10.05

For a complete list of fixes, see the Fixes tab.

HPE Synergy Custom SPP SPP 2018.11.20190611 - June 2019

HPE Synergy Custom SPP 2018.11.20190611 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

For more information, see the Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

 

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

7affc7773ab80652f9bcaf89df1fce9f71bafcd8c8c3c909c4c5b1d0d61f0e3c ICM-SynergySWComposer4.10.05-ImageStreamer4.10.05.txt

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

HPE Synergy Management combination update

Review the following documentation before updating to HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05.

For information on updating HPE Synergy, see the (Hewlett Packard Enterprise Information Library).

The HPE Synergy Software Overview Guide provides detailed references and overviews of the software and configuration utilities to support HPE Synergy. The guide is task-based and covers the documentation and resources for all supported software and configuration utilities available for:

  • HPE Synergy setup and configuration

  • OS deployment

  • Firmware updates

  • Troubleshooting

  • Remote support

Best Practices for HPE Synergy Firmware and Driver Updates provides information for updating HPE Synergy firmware and drivers through HPE Synergy Composer, powered by HPE OneView.

System ROM installation

HPE Synergy supports updating System ROMs for HPE Synergy Compute Modules independently of installing the System ROMs included in the HPE Synergy Custom SPP.

The latest available System ROMs have been qualified against all HPE Synergy configurations. Updating HPE Synergy Compute Modules to the latest System ROMs is supported.

For more information on installing System ROMs, see Customer Notification a00050817en_us.

Links

For HPE Synergy Composer and Image Streamer Upgrade Paths

For information on the required HPE Synergy Management combination upgrade paths, see the HPE Synergy Upgrade Table.

HPE Synergy Firmware Comparison Tool

To compare the contents of HPE Synergy Custom SPPs, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Firmware Feature Comparison Table

For information on new supported HPE Synergy features, see the HPE Synergy Custom SPPs, see the HPE Synergy Firmware Feature Comparison Table.

VMware Support for HPE Synergy Software Releases

HPE Synergy Custom SPP 2018.03.20180928 and 2018.03.20180628 ESXi driver installation:

  • To install the required ESXi 6.0 and 6.5 drivers into the following HPE Custom Images for VMware ESXi, see Customer Advisory a00045994.
    • HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018

    • HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018

    • HPE Custom Image for VMware ESXi 6.7

    • HPE Custom Image for VMware ESXi 6.5 U2 May 2018

    The required driver are contained in the 2018.03.20180628 HPE Synergy Custom SPP.

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.

    • When deployed, computer connectivity to FC storage through HPE VC SE Synergy 40GB F8 Module is not supported.

    • HPE Synergy Image Streamer is not supported.

HPE Synergy documentation

Reference Best Practices for HPE Synergy Firmware and Driver Updates.

http://www.hpe.com/info/synergy-docs


Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

HPE Synergy Composer 4.10.05

  • Resolves an issue where the downlink port speed for an HPE Virtual Connect SE 16Gb FC Modules for HPE Synergy module is reset to Auto when the configuration is reapplied or LIG/LI operations are performed.

  • Resolves a null pointer exception error in a database job. This error would result in disk space issues, which impact backups, patches, and other normal HPE OneView operations.

  • Resolves an issue where HPE OneView stops running and does not restart due to database startup failure.

  • Resolves an issue where HPE OneView displays the following error: The iLO in <enclosure, bay> is not configured with the IPv4 address allocated to it by the logical enclosure.

  • Resolves an issue where HPE OneView assigns duplicate IP addresses from a pool after a network disruption.

For a complete list of fixes, see the HPE Synergy Composer 4.10.05 Release Notes.

HPE Synergy Image Streamer 4.10.05

  • Corrects an issue where OS volume deployment from a secondary appliance pair might fail.

  • Corrects an issue where a large number of temporary files created over 6 months or more would prevent proper operation.

  • Corrects issues related to management appliance trust establishment after an appliance reimage process.

For a complete list of fixes, see the HPE Synergy Image Streamer 4.10.05 Release Notes.

VMware support for HPE Synergy Management combinations

VMware support depends on HPE Synergy Custom SPP versions. Review the following information for HPE VMware Custom Image support and limitations based on Synergy Custom SPP releases.

VMware support for HPE Synergy Custom SPP 2018.11.20190611 and HPE Synergy Custom SPP 2018.11.20181205

This HPE Synergy Custom SPP is based on the 2018.11.0 core Service Pack for ProLiant (SPP) and is supported with the following HPE Customer Images for VMware.

  • HPE Custom Image for VMware ESXi 6.0U3 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.5U1 - Feb 2018

    To remain on HPE Custom Image for VMware ESXi 6.5U1, obtain the latest drivers from http://vibsdepot.hpe.com or call support.

  • HPE Custom Image for VMware ESXi 6.5U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.7 - Sept 2018
    • No restrictions for Fibre Channel over Ethernet (FCoE).

    • HPE Synergy Image Streamer is not supported.

    • For online updates using the Service Pack for ProLiant 2018.11.0, updates of Gen9 servers running VMware ESXi 6.7 and 6.7U1 are not supported due to an issue with the VMware Common Information Model (CIM) interface on VMware ESXi 6.7.

      For more information, see Customer Advisory: a00050181en_us.

  • HPE Custom Image for VMWare ESXi 6.7U1 - Oct 2018

  • HPE Smart Array Gen10 Controllers Firmware 1.99 and smartpqi driver 1.0.3.2309 are delivered as part of HPE Synergy Custom SPP 2018.11.20190611 and are certified for use in a VMware vSAN configuration for Gen10 compute modules.

Drivers for Gen10 compute modules running VMware ESXi 6.5 or 6.7 may be updated by extracting the appropriate package from the HPE Synergy Custom SPP and applying it manually or using VMware tools.  HPE Integrated Smart Update Tools (iSUT) may be used for online updates of VMware ESXi 6.7.

VMware support - HPE Synergy Custom SPP 2018.09.20180919 - Oct 2018

This HPE Synergy Custom SPP is based on the 2018.09 core Service Pack for ProLiant (SPP) and is supported with the following HPE Custom Images for VMware.

  • HPE Custom Image for VMware ESXi 6.0U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.5U1 - Feb 2018

    NOTE: To stay on this VMware version, obtain the latest drivers from HPE Software Delivery Repository
  • HPE Custom Image for VMware ESXi 6.5U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.7 - Sept 2018

    • No restrictions for FCOE

    • HPE Synergy Image Streamer is not supported.

VMware Support for HPE Synergy Custom SPP 2018.06.20180709

This HPE Synergy Custom SPP is based on the 2018.06 core Service Pack for ProLiant (SPP) and is supported with the following HPE Custom Images for VMware.

  • HPE Custom Image for VMware ESXi 6.5 U2 June 2018

  • HPE Custom Image for VMware ESXi 6.7 June 2018

  • HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018

  • HPE Custom Image for VMware ESXi 6.0 U3 June 2018

VMware 6.7 Limitations for this Synergy Software Release:

  • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.

  • When deployed, compute connectivity to FC storage through HPE VC SE Synergy 40GB F8 Module is not supported.

  • HPE Image Streamer is not supported.

Supported HPE Synergy Custom SPPs

The following HPE Custom Images are supported with this HPE Synergy Management combination and HPE Synergy Custom SPP.

HPE Synergy Custom SPP 2018.11.20190611- June 2019

HPE Synergy Custom SPP 2018.11.20190611 is built on HPE Synergy Custom SPP 2018.11.20181205 and provides the latest enhancements for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

  • Includes Gen10 Smart Array controllers Firmware 1.99 and Smartpqi Driver 1.0.3.2309.
  • Includes System ROM 2.04.

HPE Synergy Custom SPP 2018.11.20181205- Nov 2018

HPE Synergy Custom SPP 2018.11.20181205 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

HPE Synergy Custom SPP 2018.09.20180919- Oct 2018

The HPE Synergy Custom SPP 2018.09.20180919 is based on the 2018.09 core SPP and provides the latest hot fixes for Synergy firmware components.

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018

HPE Synergy Custom SPP 2018.03.20180928 is based on the 2018.03 core Service Pack for ProLiant (SPP) and provides the latest hot fixes for the following HPE Synergy components.

  • HPE Smart Array E208i-p SR/ P408i-c SR/ P204i-c SR/ P416ie-m SR Gen10 Controllers

  • HPE Integrated Lights-Out 4 (HPE iLO 4) and HPE Integrated Lights-Out 5 (HPE iLO 5)

  • HPE Synergy 2820C 10Gb and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers

  • HDD FW

  • HPE VC SE 40Gb F8 Module


Notes:

Links

For HPE Synergy Composer and Image Streamer Upgrade Paths

For information on the required HPE Synergy Management combination upgrade paths, see the HPE Synergy Upgrade Table.

HPE Synergy Firmware Comparison Tool

To compare the contents of HPE Synergy Custom SPPs, see the HPE Synergy Firmware Comparison Tool.

HPE Synergy Firmware Feature Comparison Table

For information on new supported HPE Synergy features, see the HPE Synergy Custom SPPs, see the HPE Synergy Firmware Feature Comparison Table.

VMware Support for HPE Synergy Software Releases

Additional HPE Synergy Custom SPPs supported by this Synergy Management combination

Additional HPE Synergy Custom SPPs that support HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05 Management combination are listed below.

For information on the most current HPE Synergy Custom SPPs supported by this Management combination, see the Important tab.

  • HPE Synergy Custom SPP 2018.06.20180709 - July 2018

    Replaces HPE Synergy Custom SPP 2018.06.20180619 to provide latest security fixes for Gen9 and Gen10 Compute Modules and address upgrade issues with HPE Synergy 10Gb Interconnect Link Module (10Gb ILM).

  • HPE Synergy Custom SPP 2018.03.20180628 - June 2018

    Replaces HPE Synergy Custom SPP 2018.03.20180508 to address HPE Synergy Frame Link Module and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.


Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Reference the following for a list of fixes in the HPE Synergy HPE Synergy Management combination comprised of HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05.

HPE Synergy Composer 4.10.05

  • Resolves an issue where the downlink port speed for an HPE Virtual Connect SE 16Gb FC Modules for HPE Synergy module is reset to Auto when the configuration is reapplied or LIG/LI operations are performed.

  • Resolves a null pointer exception error in a database job. This error would result in disk space issues, which impact backups, patches, and other normal HPE OneView operations.

  • Resolves an issue where HPE OneView stops running and does not restart due to database startup failure.

  • Resolves an issue where HPE OneView displays the following error: The iLO in <enclosure, bay> is not configured with the IPv4 address allocated to it by the logical enclosure.

  • Resolves an issue where HPE OneView assigns duplicate IP addresses from a pool after a network disruption.

For a complete list of fixes, see the HPE Synergy Composer 4.10.05 Release Notes.

HPE Synergy Image Streamer 4.10.05

  • Corrects an issue where OS volume deployment from a secondary appliance pair might fail.

  • Corrects an issue where a large number of temporary files created over 6 months or more would prevent proper operation.

  • Corrects issues related to management appliance trust establishment after an appliance reimage process.

For a complete list of fixes, see the HPE Synergy Image Streamer 4.10.05 Release Notes.

HPE Synergy Custom SPP SPP 2018.11.20190611 - June 2019

HPE Synergy Custom SPP 2018.11.20190611 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

HPE Synergy Custom SPP 2018.11.20190611 includes Smart Array Gen10 Smart Array controllers Firmware 1.99 and Smartpqi Driver 1.0.3.2309. 

For more information, see the Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

System ROM updates

Updated System ROM firmware is available to address an issue where the system may experience a higher rate of Uncorrectable Memory errors or boot time Memory training issues with Intel Xeon Scalable Performance processors.

This issue was first introduced with System ROM version 2.00.

Hewlett Packard Enterprise recommends that any customer experiencing a memory issue immediately update to this version of the system ROM before replacing any components. This issue is not unique to HPE servers.

Synergy customers can do one of the following.

  • Install or upgrade to HPE Synergy Custom SPP 2018.11.20190611.

For more information, see the Release Notes tab.

  • Download and install the Updated System ROM firmware. For more information, see the Installation Notes tab.

For more information on the Updated System ROM firmware, see Customer notification a00072625en_us.

HPE Synergy documentation

Reference Best Practices for HPE Synergy Firmware and Driver Updates.

http://www.hpe.com/info/synergy-docs

Important

HPE Synergy Composer 4.10.05

  • Resolves an issue where the downlink port speed for an HPE Virtual Connect SE 16Gb FC Modules for HPE Synergy module is reset to Auto when the configuration is reapplied or LIG/LI operations are performed.

  • Resolves a null pointer exception error in a database job. This error would result in disk space issues, which impact backups, patches, and other normal HPE OneView operations.

  • Resolves an issue where HPE OneView stops running and does not restart due to database startup failure.

  • Resolves an issue where HPE OneView displays the following error: The iLO in <enclosure, bay> is not configured with the IPv4 address allocated to it by the logical enclosure.

  • Resolves an issue where HPE OneView assigns duplicate IP addresses from a pool after a network disruption.

For a complete list of fixes, see the HPE Synergy Composer 4.10.05 Release Notes.

HPE Synergy Image Streamer 4.10.05

  • Corrects an issue where OS volume deployment from a secondary appliance pair might fail.

  • Corrects an issue where a large number of temporary files created over 6 months or more would prevent proper operation.

  • Corrects issues related to management appliance trust establishment after an appliance reimage process.

For a complete list of fixes, see the HPE Synergy Image Streamer 4.10.05 Release Notes.

VMware support for HPE Synergy Management combinations

VMware support depends on HPE Synergy Custom SPP versions. Review the following information for HPE VMware Custom Image support and limitations based on Synergy Custom SPP releases.

VMware support for HPE Synergy Custom SPP 2018.11.20190611 and HPE Synergy Custom SPP 2018.11.20181205

This HPE Synergy Custom SPP is based on the 2018.11.0 core Service Pack for ProLiant (SPP) and is supported with the following HPE Customer Images for VMware.

  • HPE Custom Image for VMware ESXi 6.0U3 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.5U1 - Feb 2018

    To remain on HPE Custom Image for VMware ESXi 6.5U1, obtain the latest drivers from http://vibsdepot.hpe.com or call support.

  • HPE Custom Image for VMware ESXi 6.5U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.7 - Sept 2018
    • No restrictions for Fibre Channel over Ethernet (FCoE).

    • HPE Synergy Image Streamer is not supported.

    • For online updates using the Service Pack for ProLiant 2018.11.0, updates of Gen9 servers running VMware ESXi 6.7 and 6.7U1 are not supported due to an issue with the VMware Common Information Model (CIM) interface on VMware ESXi 6.7.

      For more information, see Customer Advisory: a00050181en_us.

  • HPE Custom Image for VMWare ESXi 6.7U1 - Oct 2018

  • HPE Smart Array Gen10 Controllers Firmware 1.99 and smartpqi driver 1.0.3.2309 are delivered as part of HPE Synergy Custom SPP 2018.11.20190611 and are certified for use in a VMware vSAN configuration for Gen10 compute modules.

Drivers for Gen10 compute modules running VMware ESXi 6.5 or 6.7 may be updated by extracting the appropriate package from the HPE Synergy Custom SPP and applying it manually or using VMware tools.  HPE Integrated Smart Update Tools (iSUT) may be used for online updates of VMware ESXi 6.7.

VMware support - HPE Synergy Custom SPP 2018.09.20180919 - Oct 2018

This HPE Synergy Custom SPP is based on the 2018.09 core Service Pack for ProLiant (SPP) and is supported with the following HPE Custom Images for VMware.

  • HPE Custom Image for VMware ESXi 6.0U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.5U1 - Feb 2018

    NOTE: To stay on this VMware version, obtain the latest drivers from HPE Software Delivery Repository
  • HPE Custom Image for VMware ESXi 6.5U2 - Sept 2018

  • HPE Custom Image for VMware ESXi 6.7 - Sept 2018

    • No restrictions for FCOE

    • HPE Synergy Image Streamer is not supported.

VMware Support for HPE Synergy Custom SPP 2018.06.20180709

This HPE Synergy Custom SPP is based on the 2018.06 core Service Pack for ProLiant (SPP) and is supported with the following HPE Custom Images for VMware.

  • HPE Custom Image for VMware ESXi 6.5 U2 June 2018

  • HPE Custom Image for VMware ESXi 6.7 June 2018

  • HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018

  • HPE Custom Image for VMware ESXi 6.0 U3 June 2018

VMware 6.7 Limitations for this Synergy Software Release:

  • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.

  • When deployed, compute connectivity to FC storage through HPE VC SE Synergy 40GB F8 Module is not supported.

  • HPE Image Streamer is not supported.

Supported HPE Synergy Custom SPPs

The following HPE Custom Images are supported with this HPE Synergy Management combination and HPE Synergy Custom SPP.

HPE Synergy Custom SPP 2018.11.20190611- June 2019

HPE Synergy Custom SPP 2018.11.20190611 is built on HPE Synergy Custom SPP 2018.11.20181205 and provides the latest enhancements for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

  • Includes Gen10 Smart Array controllers Firmware 1.99 and Smartpqi Driver 1.0.3.2309.
  • Includes System ROM 2.04.

HPE Synergy Custom SPP 2018.11.20181205- Nov 2018

HPE Synergy Custom SPP 2018.11.20181205 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

HPE Synergy Custom SPP 2018.09.20180919- Oct 2018

The HPE Synergy Custom SPP 2018.09.20180919 is based on the 2018.09 core SPP and provides the latest hot fixes for Synergy firmware components.

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018

HPE Synergy Custom SPP 2018.03.20180928 is based on the 2018.03 core Service Pack for ProLiant (SPP) and provides the latest hot fixes for the following HPE Synergy components.

  • HPE Smart Array E208i-p SR/ P408i-c SR/ P204i-c SR/ P416ie-m SR Gen10 Controllers

  • HPE Integrated Lights-Out 4 (HPE iLO 4) and HPE Integrated Lights-Out 5 (HPE iLO 5)

  • HPE Synergy 2820C 10Gb and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers

  • HDD FW

  • HPE VC SE 40Gb F8 Module

Revision History

Version:Comp4.10.05-ImgStmr4.10.05 (30 Apr 2019)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Reference the following for a list of fixes in the HPE Synergy HPE Synergy Management combination comprised of HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05.

HPE Synergy Composer 4.10.05

  • Resolves an issue where the downlink port speed for an HPE Virtual Connect SE 16Gb FC Modules for HPE Synergy module is reset to Auto when the configuration is reapplied or LIG/LI operations are performed.

  • Resolves a null pointer exception error in a database job. This error would result in disk space issues, which impact backups, patches, and other normal HPE OneView operations.

  • Resolves an issue where HPE OneView stops running and does not restart due to database startup failure.

  • Resolves an issue where HPE OneView displays the following error: The iLO in <enclosure, bay> is not configured with the IPv4 address allocated to it by the logical enclosure.

  • Resolves an issue where HPE OneView assigns duplicate IP addresses from a pool after a network disruption.

For a complete list of fixes, see the HPE Synergy Composer 4.10.05 Release Notes.

HPE Synergy Image Streamer 4.10.05

  • Corrects an issue where OS volume deployment from a secondary appliance pair might fail.

  • Corrects an issue where a large number of temporary files created over 6 months or more would prevent proper operation.

  • Corrects issues related to management appliance trust establishment after an appliance reimage process.

For a complete list of fixes, see the HPE Synergy Image Streamer 4.10.05 Release Notes.

HPE Synergy Custom SPP SPP 2018.11.20190611 - June 2019

HPE Synergy Custom SPP 2018.11.20190611 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

HPE Synergy Custom SPP 2018.11.20190611 includes Smart Array Gen10 Smart Array controllers Firmware 1.99 and Smartpqi Driver 1.0.3.2309. 

For more information, see the Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

System ROM updates

Updated System ROM firmware is available to address an issue where the system may experience a higher rate of Uncorrectable Memory errors or boot time Memory training issues with Intel Xeon Scalable Performance processors.

This issue was first introduced with System ROM version 2.00.

Hewlett Packard Enterprise recommends that any customer experiencing a memory issue immediately update to this version of the system ROM before replacing any components. This issue is not unique to HPE servers.

Synergy customers can do one of the following.

  • Install or upgrade to HPE Synergy Custom SPP 2018.11.20190611.

For more information, see the Release Notes tab.

  • Download and install the Updated System ROM firmware. For more information, see the Installation Notes tab.

For more information on the Updated System ROM firmware, see Customer notification a00072625en_us.

HPE Synergy documentation

Reference Best Practices for HPE Synergy Firmware and Driver Updates.

http://www.hpe.com/info/synergy-docs

Enhancements

What's new

There are several enhancements for the HPE Synergy Management combination comprised of HPE Synergy Composer 4.10.05 and HPE Synergy Image Streamer 4.10.05.

For information on key fixes, see the Fixes tab.

HPE Synergy Composer 4.10.05

For a complete list of fixes, see the Fixes tab.

HPE Synergy Image Streamer 4.10.05

For a complete list of fixes, see the Fixes tab.

HPE Synergy Custom SPP SPP 2018.11.20190611 - June 2019

HPE Synergy Custom SPP 2018.11.20190611 provides the latest fixes for Synergy firmware components and is based on the core Service Pack for ProLiant (SPP) Version 2018.11.0.

For more information, see the Service Pack for ProLiant (SPP) Version 2019.03.1 Release Notes.

 


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.