Printable version

Drivers & software

iLO 5 Channel Interface Driver for Windows Server 2016

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Driver - System Management
Version: 4.3.0.0(26 Jun 2018)
Operating System(s): Microsoft Windows Server 2016
Multi-part download
File name: cp034071.compsig (2.0 KB)
File name: cp034071.exe (732 KB)
The iLO 5 Channel Interface Driver allows software to communicate with the iLO 5 management controller. This driver is used by the Agentless Management Service, firmware flash components, and other utilities.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
  • Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

cf4dbda4d5dae74ccf944f6c2955f271983e5d188bdba504fdababd41c41fdd1 cp034071.exe
38073ca84c0d9cd4a469fd3a4c6a8feddf6d6f01ef63934e71084aeab0d71bb1 cp034071.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Version:4.6.0.0 (20 Dec 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Add support for iLO 5 version 2.x firmware.
  • Add support for HPE ProLiant Gen10 Plus servers.

Version:4.5.0.0 (9 Sep 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.


Version:4.3.0.0(B) (27 Nov 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added support for Windows Server 2019
  • Added support for the HPE ProLiant XL270d Gen10 and the HPE ProLiant XL420 Gen10

Version:4.3.0.0 (26 Jun 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
  • Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.

Version:4.1.0.0(B) (5 Feb 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This component no longer installs a null driver on iLO 5 PCI function 0. Support for that function is now provided by the iLO 5 Automatic Server Recovery Driver.


Version:4.1.0.0 (20 Nov 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.


Version:4.0.0.0 (12 Jul 2017)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release.


Type: Driver - System Management
Version: 4.3.0.0(26 Jun 2018)
Operating System(s):
Microsoft Windows Server 2016

Description

The iLO 5 Channel Interface Driver allows software to communicate with the iLO 5 management controller. This driver is used by the Agentless Management Service, firmware flash components, and other utilities.

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
  • Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

cf4dbda4d5dae74ccf944f6c2955f271983e5d188bdba504fdababd41c41fdd1 cp034071.exe
38073ca84c0d9cd4a469fd3a4c6a8feddf6d6f01ef63934e71084aeab0d71bb1 cp034071.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Revision History

Version:4.6.0.0 (20 Dec 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Add support for iLO 5 version 2.x firmware.
  • Add support for HPE ProLiant Gen10 Plus servers.

Version:4.5.0.0 (9 Sep 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.


Version:4.3.0.0(B) (27 Nov 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added support for Windows Server 2019
  • Added support for the HPE ProLiant XL270d Gen10 and the HPE ProLiant XL420 Gen10

Version:4.3.0.0 (26 Jun 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
  • Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.

Version:4.1.0.0(B) (5 Feb 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This component no longer installs a null driver on iLO 5 PCI function 0. Support for that function is now provided by the iLO 5 Automatic Server Recovery Driver.


Version:4.1.0.0 (20 Nov 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.


Version:4.0.0.0 (12 Jul 2017)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.