Printable version

Drivers & software

iLO 5 Automatic Server Recovery Driver for Windows Server 2016

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Driver - System Management
Version: 4.2.0.0(5 Feb 2018)
Operating System(s): Microsoft Windows Server 2016
Multi-part download
File name: cp033122.compsig (2.0 KB)
File name: cp033122.exe (749 KB)
The iLO 5 Automatic Server Recovery Driver manages the ASR hardware timer, which will reset the server in the event of an operating system crash or lockup.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

f2055edb6ca099913c758f76cba65eec5f62d632189a6fdd329be2d90a72a19c cp033122.exe
88c7098a933f869c45e4219f66c8c9e8b02e40f88638f0de65e4481c324cb3f3 cp033122.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

Installing the iLO 5 Channel Interface Driver, version 4.1.0.0 or earlier, will overwrite this driver. To avoid the overwrite, use version 4.1.0.0(B) or later of the iLO 5 Channel Interface Driver.


Installing the iLO 5 Channel Interface Driver, version 4.1.0.0 or earlier, will overwrite this driver. To avoid the overwrite, use version 4.1.0.0(B) or later of the iLO 5 Channel Interface Driver.

Version:4.6.0.0 (20 Dec 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Add support for iLO 5 version 2.x firmware.
  • Add support for HPE ProLiant Gen10 Plus servers.

Version:4.4.0.0(B) (27 Nov 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added support for Windows Server 2019
  • Added support for the HPE ProLiant XL270d Gen10 and the HPE ProLiant XL420 Gen10

Version:4.4.0.0 (16 Jul 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • The driver now configures the ASR hardware to assert a Non-Maskable Interrupt nine seconds before the hardware timer expires. In the event of an operating system hang, this will force a Windows bugcheck and memory dump. This feature can be enabled and disabled using the new Set-AsrPreTimeoutNMI.ps1 PowerShell script.
  • ASR is no longer used to restart the system after a Windows bugcheck. By default, Windows will automatically reboot after a bugcheck.
  • Changes to the ASR settings are now written to disk immediately.
  • The Get-AsrTimeout.ps1 PowerShell script has been renamed to Get-AsrSettings.ps1.

Version:4.2.0.0(B) (26 Jun 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.


Version:4.2.0.0 (5 Feb 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release.


Type: Driver - System Management
Version: 4.2.0.0(5 Feb 2018)
Operating System(s):
Microsoft Windows Server 2016

Description

The iLO 5 Automatic Server Recovery Driver manages the ASR hardware timer, which will reset the server in the event of an operating system crash or lockup.

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

f2055edb6ca099913c758f76cba65eec5f62d632189a6fdd329be2d90a72a19c cp033122.exe
88c7098a933f869c45e4219f66c8c9e8b02e40f88638f0de65e4481c324cb3f3 cp033122.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

Installing the iLO 5 Channel Interface Driver, version 4.1.0.0 or earlier, will overwrite this driver. To avoid the overwrite, use version 4.1.0.0(B) or later of the iLO 5 Channel Interface Driver.


Important

Installing the iLO 5 Channel Interface Driver, version 4.1.0.0 or earlier, will overwrite this driver. To avoid the overwrite, use version 4.1.0.0(B) or later of the iLO 5 Channel Interface Driver.

Revision History

Version:4.6.0.0 (20 Dec 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Add support for iLO 5 version 2.x firmware.
  • Add support for HPE ProLiant Gen10 Plus servers.

Version:4.4.0.0(B) (27 Nov 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • Added support for Windows Server 2019
  • Added support for the HPE ProLiant XL270d Gen10 and the HPE ProLiant XL420 Gen10

Version:4.4.0.0 (16 Jul 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • The driver now configures the ASR hardware to assert a Non-Maskable Interrupt nine seconds before the hardware timer expires. In the event of an operating system hang, this will force a Windows bugcheck and memory dump. This feature can be enabled and disabled using the new Set-AsrPreTimeoutNMI.ps1 PowerShell script.
  • ASR is no longer used to restart the system after a Windows bugcheck. By default, Windows will automatically reboot after a bugcheck.
  • Changes to the ASR settings are now written to disk immediately.
  • The Get-AsrTimeout.ps1 PowerShell script has been renamed to Get-AsrSettings.ps1.

Version:4.2.0.0(B) (26 Jun 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.


Version:4.2.0.0 (5 Feb 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.