Printable version

Drivers & software

Broadcom NX1 Online Firmware Upgrade Utility for HPE MicroServer Gen10 Server with Linux x86 and x64

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - Network
Version: 2.18.15(23 Jun 2017)
Operating System(s): ClearOS 7
Red Hat Enterprise Linux 7 Server
File name: HPE_Broadcom_NX1_Online_Firmware_Upgrade_Utility_for_Linux_x86_64.zip (4.1 MB)
Broadcom NX1 Online Firmware Upgrade Utility for HPE MicroServer Gen10 Server with Linux x86 and x64

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

7866379968db7c96f2266187e078f6b8ce56ff128e1044ef3d81762369a45e51 HPE_Broadcom_NX1_Online_Firmware_Upgrade_Utility_for_Linux_x86_64.zip

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

  1. Download the zip file to a directory on a target server.
  2. Unzip to a temporary directory in disk.
  3. Double click "HPE_Broadcom_NX1_Online_Firmware_Upgrade_Utility_for_Linux_x86_64" folder to go into the folder and verify that the following files are extracted:
    • firmware-nic-broadcom-2.18.15-1.1.x86_64.rpm
    • Instruction.txt
  4. Open terminal and redirect terminal to folder "HPE_Broadcom_NX1_Online_Firmware_Upgrade_Utility_for_Linux_x86_64".
  5. To install the package, keyin "rpm -ivh firmware-nic-broadcom-2.18.15-1.1.x86_64.rpm"
  6. Redirect terminal to usr/lib/x86_64-linux-gnu/firmware-nic-broadcom-2.18.15-1.1
  7. To install the firmware, keyin "./setup".
  8. Make sure your device is correct (331T or 332T) in the terminal then press "y" and press Enter, the firmware update will start. Otherwrise press "n" and press enter to skip.
  9. After the process complete, reboot system to take effect for firmware update.

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release of Broadcom NX1 Online Firmware Upgrade Utility for HPE MicroServer Gen10 Server with Linux x86 and x64

Version:2.18.15 (23 Jun 2017)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release of Broadcom NX1 Online Firmware Upgrade Utility for HPE MicroServer Gen10 Server with Linux x86 and x64


Type: Firmware - Network
Version: 2.18.15(23 Jun 2017)
Operating System(s):
ClearOS 7
Red Hat Enterprise Linux 7 Server

Description

Broadcom NX1 Online Firmware Upgrade Utility for HPE MicroServer Gen10 Server with Linux x86 and x64

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

7866379968db7c96f2266187e078f6b8ce56ff128e1044ef3d81762369a45e51 HPE_Broadcom_NX1_Online_Firmware_Upgrade_Utility_for_Linux_x86_64.zip

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

  1. Download the zip file to a directory on a target server.
  2. Unzip to a temporary directory in disk.
  3. Double click "HPE_Broadcom_NX1_Online_Firmware_Upgrade_Utility_for_Linux_x86_64" folder to go into the folder and verify that the following files are extracted:
    • firmware-nic-broadcom-2.18.15-1.1.x86_64.rpm
    • Instruction.txt
  4. Open terminal and redirect terminal to folder "HPE_Broadcom_NX1_Online_Firmware_Upgrade_Utility_for_Linux_x86_64".
  5. To install the package, keyin "rpm -ivh firmware-nic-broadcom-2.18.15-1.1.x86_64.rpm"
  6. Redirect terminal to usr/lib/x86_64-linux-gnu/firmware-nic-broadcom-2.18.15-1.1
  7. To install the firmware, keyin "./setup".
  8. Make sure your device is correct (331T or 332T) in the terminal then press "y" and press Enter, the firmware update will start. Otherwrise press "n" and press enter to skip.
  9. After the process complete, reboot system to take effect for firmware update.

Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release of Broadcom NX1 Online Firmware Upgrade Utility for HPE MicroServer Gen10 Server with Linux x86 and x64

Revision History

Version:2.18.15 (23 Jun 2017)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release of Broadcom NX1 Online Firmware Upgrade Utility for HPE MicroServer Gen10 Server with Linux x86 and x64


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.