Printable version

Drivers & software

HP Network Configuration Utility for Windows Server 2008 R2

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Driver - Network
Version: 10.50.0.0(27 Mar 2012)
Operating System(s): Microsoft Windows Server 2008 R2
File name: cp014726.exe (14 MB)
This package contains the teaming and configuration utility for HP ProLiant NICs running under Microsoft Windows Server 2008 R2. This utility allows you to configure and manage fault-tolerant teams of adapters installed in ProLiant servers.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software now supports the following network adapters:

  • HP Ethernet 1Gb 4-port 331FLR Adapter
  • HP Ethernet 1Gb 4-port 331T Adapter
  • HP Ethernet 1Gb 4-port 331i Adapter
  • HP Ethernet 1Gb 2-port 361i Adapter
  • HP Flex-10 10Gb 2-port 530FLB Adapter
  • HP Flex-10 10Gb 2-port 530M Adapter
  • HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
  • HP Flex-10 10Gb 2-port 552M Adapter
  • HP FlexFabric 10Gb 2-port 554FLB Adapter
  • HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
  • HP FlexFabric 10Gb 2-port 554M Adapter

When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:

  • "This program has been blocked for your protection"
  • "Blocked"
  • "Not Trusted"
  • MSIExec installation error (Return code: 1625)
  • "The recommended software listed below could not be installed…"

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

acadcbd50f12b41a1a7291c090c7625b3c8a99c8446fc8420da9c2f1008376e9 cp014726.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.


End User License Agreements:
Hewlett-Packard End User License Agreement


When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:

  • "This program has been blocked for your protection"
  • "Blocked"
  • "Not Trusted"
  • MSIExec installation error (Return code: 1625)
  • "The recommended software listed below could not be installed…"

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Notes:
Additional documentation is available in the HP NIC Documentation softpaq, version 10.50.


Version:11.50.0.0 (24 Oct 2016)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This product now supports the following network adapters:

  • HP FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter
  • HPE FlexFabric 10Gb 2-port 556FLR-T Adapter
  • HP Ethernet 10Gb 2-port 557SFP+ Adapter
  • HP FlexFabric 20Gb 2-port 650FLB Adapter
  • HP FlexFabric 20Gb 2-port 650M Adapter
  • HP StoreFabric CN1200E Dual Port Converged Network Adapter
  • HPE StoreFabric CN1200E-T Adapter

Version:10.90.0.0(B) (9 Sep 2014)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This component addresses an issue which results in extremely long installation times on systems with a large number of virtual miniports.


Version:10.90.0.0 (26 Apr 2014)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software now supports the following network adapters:

  • HP FlexFabric 20Gb 2-port 630FLB Adapter
  • HP FlexFabric 20Gb 2-port 630M Adapter

Version:10.85.0.0 (18 Feb 2014)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software addresses an issue that results in a network disconnect when NCU is opened for the first time.

This software addresses an issue where updating CISCO switch firmware prevents an 802.3ad team from forming.

Enhancements

This software now supports the following network adapters:

  • HP Ethernet 1Gb 2-port 363i Adapter
  • HP Ethernet 1Gb 1-port 364i Adapter
  • HP Ethernet 1Gb 2-port 367i Adapter
  • HP Ethernet 10Gb 2-port 562i Adapter

Version:10.80.0.0 (10 Sep 2013)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software addresses an issue where using an HP Ethernet 1Gb 4-port 331FLR Adapter in an HP NIC Teaming 802.3ad team configuration results in a Windows Stop Error (BSOD).
 
This software addresses an issue where a Windows Stop Error (BSOD) could occur during Link Aggregation Control Protocol (LACP) negotiation when using Automatic and 802.3ad team types.
 
In conjunction with HP Broadcom 1Gb Driver version 16.0.0.7 or later, this software addresses an issue which could result in a disabled team status if the team was created with Large Send Offload version 1 over IPv4 (LCOV1IPv4).
 
This software addresses an issue which could result in a disabled team status if the team has Receive Side Scaling (RSS) enabled and contains devices supported by an HP Emulex 10Gb Driver for Windows.

Enhancements

This software now supports the following network adapters:

  • HP Ethernet 1Gb 2-port 332i Adapter
  • HP FlexFabric 10Gb 2-port 526FLR-SFP+ Adapter
  • HP FlexFabric 10Gb 2-port 533FLR-T Adapter
  • HP FlexFabric 10Gb 2-port 534FLB Adapter
  • HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
  • HP FlexFabric 10Gb 2-port 534M Adapter
  • HP Ethernet 10Gb 2-port 561FLR-T Adapter
  • HP Ethernet 10Gb 2-port 561T Adapter
  • HP StoreFabric CN1100R Dual Port Converged Network Adapter

Version:10.70.0.0 (19 Feb 2013)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software addresses an issue where the Windows warning event ID49 was generated when a second VLAN setting was added on a teamed device.

This software addresses an issue where link diagnostics failed on the NC375T PCI Express Quad Port Gigabit Server Adapter.

This software addresses an issue where an 802.3ad team failed when Receive Path Validation (RPV) was disabled.

Enhancements

This software now supports the following network adapters:

  • HP Ethernet 1Gb 4P 366FLR Adapter
  • HP Ethernet 10Gb 2-port 530T Adapter
  • HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
  • HP Ethernet 10Gb 2-port 560M Adapter

Version:10.65.0.0 (4 Sep 2012)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software addresses an issue where the HP NIC teaming driver may not initiate a failover when the primary NIC miniport driver of the team indicates that the NIC has been reset.

Enhancements

This software now supports the following network adapters:

  • HP Ethernet 1Gb 4-port 331i-SPI Adapter
  • HP Ethernet 10Gb 2-port 560SFP+ Adapter

Version:10.60.0.0 (4 Jun 2012)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software will now show auto negotiation flow control information only when a network adapter has links connected.

This software no longer provides Wake-On-LAN support for the HP Flex-10 10Gb 2-port 530M Adapter.

Enhancements

This software now supports the following network adapters:

  • HP Ethernet 1Gb 2-port 330i Adapter
  • HP Ethernet 1Gb 2-port 332T Adapter
  • HP Ethernet 1Gb 2-port 361FLB Adapter
  • HP Ethernet 1Gb 2-port 361T Adapter
  • HP Ethernet 1Gb 4-port 366i Adapter
  • HP Ethernet 1Gb 4-port 366M Adapter
  • HP Ethernet 10Gb 2-port 530SFP+ Adapter
  • HP Ethernet 10Gb 2-port 560FLB Adapter
This software now supports MAC-based NIC, VLAN and teaming configurations using the command-line tool “cqniccmd.exe” with the /M operator.

This software now displays the firmware version of HP Intel E1E Series network adapters.

This software now supports Receive-Side Scaling (RSS) for the HP Intel E1E series network adapters.

This software now provides Receive-Side Scaling (RSS) property support for the VLAN and NIC teaming of HP Intel E1E series network adapters.

Version:10.50.0.0 (27 Mar 2012)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software now supports the following network adapters:

  • HP Ethernet 1Gb 4-port 331FLR Adapter
  • HP Ethernet 1Gb 4-port 331T Adapter
  • HP Ethernet 1Gb 4-port 331i Adapter
  • HP Ethernet 1Gb 2-port 361i Adapter
  • HP Flex-10 10Gb 2-port 530FLB Adapter
  • HP Flex-10 10Gb 2-port 530M Adapter
  • HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
  • HP Flex-10 10Gb 2-port 552M Adapter
  • HP FlexFabric 10Gb 2-port 554FLB Adapter
  • HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
  • HP FlexFabric 10Gb 2-port 554M Adapter

Version:10.45.0.0 (11 Nov 2011)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software corrects an issue that can result in incorrect team speed when used with Virtual Connect.


Version:10.40.0.0 (6 May 2011)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software now supports Receive-Side Scaling (RSS) Teaming.

This software now supports the following network adapters:

  • HP NC525m 10Gb 2-port FlexFabric Converged Network Adapter
  • HP NC552SFP 10Gb 2-port Ethernet Server Adapter
  • HP StorageWorks CN1100E Dual Port Converged Network Adapter

Version:10.30.0.0 (24 Feb 2011)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software now supports the following network adapters:

  • HP NC112i 1-port Ethernet Server Adapter 
  • HP NC553m 10Gb 2-port FlexFabric Converged Network Adapter

Version:10.20.0.0 (B) (12 Jan 2011)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This component now correctly recognizes the HP StorageWorks CN1000Q Dual Port Converged Network Adapter.


Version:10.20.0.0 (15 Dec 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The number of receive descriptors for Mellanox adapters is now configurable.

This software now supports the following network adapters:

  • HP NC523SFP 10Gb 2-port Ethernet Server Adapter
  • HP StorageWorks CN1000Q Dual Port Converged Network Adapter

Version:10.10.0.0 (9 Sep 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Broadcom Multifunction adapters now support a maximum frame size of 1324.

For systems running Windows Server 2008 and Windows Server 2008 R2 the maximum number of receive descriptors is now 5000 for Broadcom NX2 1GB adapters.

For systems running Windows Server 2008 and Windows Server 2008 R2 the maximum number of receive descriptors is now 3000 for Broadcom NX2 10GB adapters.

Flex-10 is now supported on Mellanox network adapters.

This software will support VLANs created in Hyper-V Virtual Machines.

This product now supports the following network adapters:

  • HP NC552m 10Gb 2-port FlexFabric Converged Network Adapter
  • HP NC543i 2-port 4x QDR IB/10Gb Adapter

Version:10.0.0.0 (27 May 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This product now supports the following network adapters:

  • HP NC365T 4-port Ethernet Server Adapter
  • HP NC543i 1-port 4x QDR IB/Flex-10 10Gb Adapter
  • HP NC553i 10Gb 2-port FlexFabric Converged Network Adapter

Version:9.90.1.0 (8 Feb 2010)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This software no longer crashes when the VLAN TAB on a teamed device is selected.

This software no longer throws an error message when the VLAN button on a teamed device is selected.

This software no longer causes VLANs to stop communicating when one of them is disabled when running under Windows Server 2008.

Enhancements

This software now supports the following network adapters:

  • HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
  • HP NC550SFP Dual Port 10GbE Server Adapter
  • HP NC550m Dual Port Flex-10 10GbE BL-c Adapter
  • HP StorageWorks CN1000E Dual Port Converged Network Adapter

Version:9.80.1.0 (12 Nov 2009)
Enhancements
This software now supports the HP NC375T PCI Express Quad Port Gigabit Server Adapter.

Version:9.70.0.0 (18 Aug 2009)
Enhancements
Initial release.

Version:10.61.0.0 (1 May 2012)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software addresses an issue where the teaming driver may not initiate a failover when the NIC miniport driver indicates that the primary teamed NIC has been reset.


Type: Driver - Network
Version: 10.50.0.0(27 Mar 2012)
Operating System(s):
Microsoft Windows Server 2008 R2

Description

This package contains the teaming and configuration utility for HP ProLiant NICs running under Microsoft Windows Server 2008 R2. This utility allows you to configure and manage fault-tolerant teams of adapters installed in ProLiant servers.

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software now supports the following network adapters:

  • HP Ethernet 1Gb 4-port 331FLR Adapter
  • HP Ethernet 1Gb 4-port 331T Adapter
  • HP Ethernet 1Gb 4-port 331i Adapter
  • HP Ethernet 1Gb 2-port 361i Adapter
  • HP Flex-10 10Gb 2-port 530FLB Adapter
  • HP Flex-10 10Gb 2-port 530M Adapter
  • HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
  • HP Flex-10 10Gb 2-port 552M Adapter
  • HP FlexFabric 10Gb 2-port 554FLB Adapter
  • HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
  • HP FlexFabric 10Gb 2-port 554M Adapter

Installation Instructions

When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:

  • "This program has been blocked for your protection"
  • "Blocked"
  • "Not Trusted"
  • MSIExec installation error (Return code: 1625)
  • "The recommended software listed below could not be installed…"

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

acadcbd50f12b41a1a7291c090c7625b3c8a99c8446fc8420da9c2f1008376e9 cp014726.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


When attempting to install or update a supported system with HP Network Configuration Utility for Windows Server 2008 R2 version 10.50.0.0, the system needs to be updated with HP Network Configuration Utility for Windows Server 2008 R2 version 10.65.0.0, if any of the following errors occur:

  • "This program has been blocked for your protection"
  • "Blocked"
  • "Not Trusted"
  • MSIExec installation error (Return code: 1625)
  • "The recommended software listed below could not be installed…"

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Notes:
Additional documentation is available in the HP NIC Documentation softpaq, version 10.50.


Revision History

Version:11.50.0.0 (24 Oct 2016)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This product now supports the following network adapters:

  • HP FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter
  • HPE FlexFabric 10Gb 2-port 556FLR-T Adapter
  • HP Ethernet 10Gb 2-port 557SFP+ Adapter
  • HP FlexFabric 20Gb 2-port 650FLB Adapter
  • HP FlexFabric 20Gb 2-port 650M Adapter
  • HP StoreFabric CN1200E Dual Port Converged Network Adapter
  • HPE StoreFabric CN1200E-T Adapter

Version:10.90.0.0(B) (9 Sep 2014)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This component addresses an issue which results in extremely long installation times on systems with a large number of virtual miniports.


Version:10.90.0.0 (26 Apr 2014)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software now supports the following network adapters:

  • HP FlexFabric 20Gb 2-port 630FLB Adapter
  • HP FlexFabric 20Gb 2-port 630M Adapter

Version:10.85.0.0 (18 Feb 2014)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software addresses an issue that results in a network disconnect when NCU is opened for the first time.

This software addresses an issue where updating CISCO switch firmware prevents an 802.3ad team from forming.

Enhancements

This software now supports the following network adapters:

  • HP Ethernet 1Gb 2-port 363i Adapter
  • HP Ethernet 1Gb 1-port 364i Adapter
  • HP Ethernet 1Gb 2-port 367i Adapter
  • HP Ethernet 10Gb 2-port 562i Adapter

Version:10.80.0.0 (10 Sep 2013)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software addresses an issue where using an HP Ethernet 1Gb 4-port 331FLR Adapter in an HP NIC Teaming 802.3ad team configuration results in a Windows Stop Error (BSOD).
 
This software addresses an issue where a Windows Stop Error (BSOD) could occur during Link Aggregation Control Protocol (LACP) negotiation when using Automatic and 802.3ad team types.
 
In conjunction with HP Broadcom 1Gb Driver version 16.0.0.7 or later, this software addresses an issue which could result in a disabled team status if the team was created with Large Send Offload version 1 over IPv4 (LCOV1IPv4).
 
This software addresses an issue which could result in a disabled team status if the team has Receive Side Scaling (RSS) enabled and contains devices supported by an HP Emulex 10Gb Driver for Windows.

Enhancements

This software now supports the following network adapters:

  • HP Ethernet 1Gb 2-port 332i Adapter
  • HP FlexFabric 10Gb 2-port 526FLR-SFP+ Adapter
  • HP FlexFabric 10Gb 2-port 533FLR-T Adapter
  • HP FlexFabric 10Gb 2-port 534FLB Adapter
  • HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
  • HP FlexFabric 10Gb 2-port 534M Adapter
  • HP Ethernet 10Gb 2-port 561FLR-T Adapter
  • HP Ethernet 10Gb 2-port 561T Adapter
  • HP StoreFabric CN1100R Dual Port Converged Network Adapter

Version:10.70.0.0 (19 Feb 2013)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software addresses an issue where the Windows warning event ID49 was generated when a second VLAN setting was added on a teamed device.

This software addresses an issue where link diagnostics failed on the NC375T PCI Express Quad Port Gigabit Server Adapter.

This software addresses an issue where an 802.3ad team failed when Receive Path Validation (RPV) was disabled.

Enhancements

This software now supports the following network adapters:

  • HP Ethernet 1Gb 4P 366FLR Adapter
  • HP Ethernet 10Gb 2-port 530T Adapter
  • HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
  • HP Ethernet 10Gb 2-port 560M Adapter

Version:10.65.0.0 (4 Sep 2012)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software addresses an issue where the HP NIC teaming driver may not initiate a failover when the primary NIC miniport driver of the team indicates that the NIC has been reset.

Enhancements

This software now supports the following network adapters:

  • HP Ethernet 1Gb 4-port 331i-SPI Adapter
  • HP Ethernet 10Gb 2-port 560SFP+ Adapter

Version:10.60.0.0 (4 Jun 2012)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software will now show auto negotiation flow control information only when a network adapter has links connected.

This software no longer provides Wake-On-LAN support for the HP Flex-10 10Gb 2-port 530M Adapter.

Enhancements

This software now supports the following network adapters:

  • HP Ethernet 1Gb 2-port 330i Adapter
  • HP Ethernet 1Gb 2-port 332T Adapter
  • HP Ethernet 1Gb 2-port 361FLB Adapter
  • HP Ethernet 1Gb 2-port 361T Adapter
  • HP Ethernet 1Gb 4-port 366i Adapter
  • HP Ethernet 1Gb 4-port 366M Adapter
  • HP Ethernet 10Gb 2-port 530SFP+ Adapter
  • HP Ethernet 10Gb 2-port 560FLB Adapter
This software now supports MAC-based NIC, VLAN and teaming configurations using the command-line tool “cqniccmd.exe” with the /M operator.

This software now displays the firmware version of HP Intel E1E Series network adapters.

This software now supports Receive-Side Scaling (RSS) for the HP Intel E1E series network adapters.

This software now provides Receive-Side Scaling (RSS) property support for the VLAN and NIC teaming of HP Intel E1E series network adapters.

Version:10.50.0.0 (27 Mar 2012)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software now supports the following network adapters:

  • HP Ethernet 1Gb 4-port 331FLR Adapter
  • HP Ethernet 1Gb 4-port 331T Adapter
  • HP Ethernet 1Gb 4-port 331i Adapter
  • HP Ethernet 1Gb 2-port 361i Adapter
  • HP Flex-10 10Gb 2-port 530FLB Adapter
  • HP Flex-10 10Gb 2-port 530M Adapter
  • HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
  • HP Flex-10 10Gb 2-port 552M Adapter
  • HP FlexFabric 10Gb 2-port 554FLB Adapter
  • HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
  • HP FlexFabric 10Gb 2-port 554M Adapter

Version:10.45.0.0 (11 Nov 2011)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software corrects an issue that can result in incorrect team speed when used with Virtual Connect.


Version:10.40.0.0 (6 May 2011)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software now supports Receive-Side Scaling (RSS) Teaming.

This software now supports the following network adapters:

  • HP NC525m 10Gb 2-port FlexFabric Converged Network Adapter
  • HP NC552SFP 10Gb 2-port Ethernet Server Adapter
  • HP StorageWorks CN1100E Dual Port Converged Network Adapter

Version:10.30.0.0 (24 Feb 2011)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software now supports the following network adapters:

  • HP NC112i 1-port Ethernet Server Adapter 
  • HP NC553m 10Gb 2-port FlexFabric Converged Network Adapter

Version:10.20.0.0 (B) (12 Jan 2011)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This component now correctly recognizes the HP StorageWorks CN1000Q Dual Port Converged Network Adapter.


Version:10.20.0.0 (15 Dec 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The number of receive descriptors for Mellanox adapters is now configurable.

This software now supports the following network adapters:

  • HP NC523SFP 10Gb 2-port Ethernet Server Adapter
  • HP StorageWorks CN1000Q Dual Port Converged Network Adapter

Version:10.10.0.0 (9 Sep 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Broadcom Multifunction adapters now support a maximum frame size of 1324.

For systems running Windows Server 2008 and Windows Server 2008 R2 the maximum number of receive descriptors is now 5000 for Broadcom NX2 1GB adapters.

For systems running Windows Server 2008 and Windows Server 2008 R2 the maximum number of receive descriptors is now 3000 for Broadcom NX2 10GB adapters.

Flex-10 is now supported on Mellanox network adapters.

This software will support VLANs created in Hyper-V Virtual Machines.

This product now supports the following network adapters:

  • HP NC552m 10Gb 2-port FlexFabric Converged Network Adapter
  • HP NC543i 2-port 4x QDR IB/10Gb Adapter

Version:10.0.0.0 (27 May 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This product now supports the following network adapters:

  • HP NC365T 4-port Ethernet Server Adapter
  • HP NC543i 1-port 4x QDR IB/Flex-10 10Gb Adapter
  • HP NC553i 10Gb 2-port FlexFabric Converged Network Adapter

Version:9.90.1.0 (8 Feb 2010)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This software no longer crashes when the VLAN TAB on a teamed device is selected.

This software no longer throws an error message when the VLAN button on a teamed device is selected.

This software no longer causes VLANs to stop communicating when one of them is disabled when running under Windows Server 2008.

Enhancements

This software now supports the following network adapters:

  • HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
  • HP NC550SFP Dual Port 10GbE Server Adapter
  • HP NC550m Dual Port Flex-10 10GbE BL-c Adapter
  • HP StorageWorks CN1000E Dual Port Converged Network Adapter

Version:9.80.1.0 (12 Nov 2009)
Enhancements
This software now supports the HP NC375T PCI Express Quad Port Gigabit Server Adapter.

Version:9.70.0.0 (18 Aug 2009)
Enhancements
Initial release.

Version:10.61.0.0 (1 May 2012)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


This software addresses an issue where the teaming driver may not initiate a failover when the NIC miniport driver indicates that the primary teamed NIC has been reset.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.