Printable version

Drivers & software

** CRITICAL ** Firmware Flash Component for Linux - HP MSA 2040 200GB, 400GB, 800GB and 1600GB 12G SAS-SSD SFF Drive Models ( MO0200JEFNV, MO0400JEFPA, MO0800JEFPB and MO1600JEFPC )

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - SAS Storage Disk
Version: HPD1(23 Jun 2015)
Operating System(s): HP-UX 11.23
HP-UX 11.31 (IA)
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
Red Hat Enterprise Linux 6 Server (x86)
Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (x86)
SUSE Linux Enterprise Server 12
VMware ESXi 5.0
VMware vSphere 5.1
File name: CP026775.scexe (18 MB)
This Linux Smart Component contains a firmware update for SFF hard drive models MO0200JEFNV (200GB SAS-SSD 12G), MO0400JEFPA (400GB SAS-SSD 12G), MO0800JEFPB (800GB SAS-SSD 12G) and MO1600JEFPC (1600GB SAS-SSD 12G) in HP MSA 2040 Storage Arrays.

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 2040 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to /var/cpq/MSA2000_IP.log and flashing summary is logged to /var/cpq/Component.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040 Storage Arrays.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

f10ffd5ba922712f9a0fa83523f439ac CP026775.scexe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

  1. Place the downloaded firmware package in a temporary directory.

  2. Open a Linux command console.
  3. From the directory containing the downloaded file, enable execute access to this module by entering chmod +x CPxxxxxx.scexe, where CPxxxxxx.scexe represents the downloaded file.
  4. Execute the Smart Component by entering a command similar to the following: ./CPxxxxxx.scexe --target <ip_address> --user <username> --passwd <password>
  5. Follow onscreen instructions.

NOTE:
  • Use the -e or -f option when flashing a device, even if it is up to date.

  • Use the -g option when downgrading.

  • For details on supported command options, see the online help by executing the command ./CPxxxxxx.scexe or ./CPxxxxxx.scexe -h.

  • If the user name or password contains an exclamation mark (!), enclose the string in single quotes or enter a backslash (\) before the exclamation point. For example, ’!manage’ or \!manage


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Critical - HP requires users update to this version immediately.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 2040 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to /var/cpq/MSA2000_IP.log and flashing summary is logged to /var/cpq/Component.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040 Storage Arrays.


Supported Devices and Features:

Firmware on the listed drives can be updated when attached to any HP MSA 2040 Storage Arrays.

  • HP MSA 2040 SAN Dual Controller SFF Storage
  • HP MSA 2040 SAS Dual Controller SFF Storage

Upgrade Requirement:
Critical - HP requires users update to this version immediately.


Following issue is fixed:

  • Incorrect data reads might occur when accessing unaligned 4k reads and the data read has zero content preceding customer data

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 2040 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to /var/cpq/MSA2000_IP.log and flashing summary is logged to /var/cpq/Component.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040 Storage Arrays.

Version:HPD3 (9 Mar 2018)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Following enhancement was added to this version of firmware:

  • Firmware version HPD3 supports NDU (non-disruptive update) firmware updates.

Version:HPD2 (2 Dec 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Following issues are fixed in this firmware:

  • Removed indication of unmap support
  • Improve SMART trip reporting

Version:HPD1 (23 Jun 2015)
Fixes

Upgrade Requirement:
Critical - HP requires users update to this version immediately.


Following issue is fixed:

  • Incorrect data reads might occur when accessing unaligned 4k reads and the data read has zero content preceding customer data

Type: Firmware - SAS Storage Disk
Version: HPD1(23 Jun 2015)
Operating System(s):
HP-UX 11.23
HP-UX 11.31 (IA)
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
Red Hat Enterprise Linux 6 Server (x86)
Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (x86)
SUSE Linux Enterprise Server 12
VMware ESXi 5.0
VMware vSphere 5.1

Description

This Linux Smart Component contains a firmware update for SFF hard drive models MO0200JEFNV (200GB SAS-SSD 12G), MO0400JEFPA (400GB SAS-SSD 12G), MO0800JEFPB (800GB SAS-SSD 12G) and MO1600JEFPC (1600GB SAS-SSD 12G) in HP MSA 2040 Storage Arrays.

Installation Instructions

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 2040 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to /var/cpq/MSA2000_IP.log and flashing summary is logged to /var/cpq/Component.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040 Storage Arrays.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

f10ffd5ba922712f9a0fa83523f439ac CP026775.scexe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

  1. Place the downloaded firmware package in a temporary directory.

  2. Open a Linux command console.
  3. From the directory containing the downloaded file, enable execute access to this module by entering chmod +x CPxxxxxx.scexe, where CPxxxxxx.scexe represents the downloaded file.
  4. Execute the Smart Component by entering a command similar to the following: ./CPxxxxxx.scexe --target <ip_address> --user <username> --passwd <password>
  5. Follow onscreen instructions.

NOTE:
  • Use the -e or -f option when flashing a device, even if it is up to date.

  • Use the -g option when downgrading.

  • For details on supported command options, see the online help by executing the command ./CPxxxxxx.scexe or ./CPxxxxxx.scexe -h.

  • If the user name or password contains an exclamation mark (!), enclose the string in single quotes or enter a backslash (\) before the exclamation point. For example, ’!manage’ or \!manage


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Critical - HP requires users update to this version immediately.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 2040 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to /var/cpq/MSA2000_IP.log and flashing summary is logged to /var/cpq/Component.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040 Storage Arrays.


Supported Devices and Features:

Firmware on the listed drives can be updated when attached to any HP MSA 2040 Storage Arrays.

  • HP MSA 2040 SAN Dual Controller SFF Storage
  • HP MSA 2040 SAS Dual Controller SFF Storage

Fixes

Upgrade Requirement:
Critical - HP requires users update to this version immediately.


Following issue is fixed:

  • Incorrect data reads might occur when accessing unaligned 4k reads and the data read has zero content preceding customer data

Important

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 2040 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 2040 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to /var/cpq/MSA2000_IP.log and flashing summary is logged to /var/cpq/Component.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 2040 Storage Arrays.

Revision History

Version:HPD3 (9 Mar 2018)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Following enhancement was added to this version of firmware:

  • Firmware version HPD3 supports NDU (non-disruptive update) firmware updates.

Version:HPD2 (2 Dec 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Following issues are fixed in this firmware:

  • Removed indication of unmap support
  • Improve SMART trip reporting

Version:HPD1 (23 Jun 2015)
Fixes

Upgrade Requirement:
Critical - HP requires users update to this version immediately.


Following issue is fixed:

  • Incorrect data reads might occur when accessing unaligned 4k reads and the data read has zero content preceding customer data

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.