Printable version

Drivers & software

* RECOMMENDED * HP Agentless Management Service Offline Bundle for VMware vSphere 5.5

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Software - System Management
Version: 10.1.0(30 Mar 2015)
Operating System(s): VMware vSphere 5.5
File name: hp-ams-esxi5.5-bundle-10.1.0-12.zip (6.6 MB)
The HP Agentless Management Service (AMS) is a service that provides support for Agentless Management and Active Health. Agentless Management Service provides a wider range of server information (e.g. OS type and version, installed applications, IP addresses) allowing customers to complement hardware management with OS information and alerting. Agentless Management provides Integrated Lights Out (iLO) based robust management without the complexity of OS-based agents. Active Health provides 24x7 mission control for servers, delivering maximum uptime through automated monitoring, diagnostics and alerting. The contents of the HP AMS offline bundle include the latest HP Common Information Model (CIM) Limited Providers, HP Integrated Lights Out (iLO) driver, HP Compaq ROM Utility (CRU) driver, HP Agentless Management Service (AMS) and Fibre Channel (FC) HBA access libraries. The Agentless Management Service (AMS) Offline Bundle only includes the Limited HP CIM Providers which are not sufficient to support Online Driver and FW update using HP Smart Update Manager (HP SUM) and the HP Service Pack for ProLiant (HP SPP).

AMS New Features:

  • Reporting of SAS/SATA SSD and temperature properties to cpqSasPhyDrvTable MIB
  • Reporting of SATA SSD and temperature properties to cpqIdeAtaDiskTable MIB
  • Supports new cpqSeUSBPortTable MIB, SNMP traps and IML events for new HP Dual 8GB MicroSD EM USB Kit device

Added support for the following servers:

  • HP ProLiant ML10 V2 (only supports the Intel® Xeon® E3-1200)
  • HP ProLiant XL190r Gen9
  • HP ProLiant XL170r Gen9

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

cfb41d61769a0d5f1a07c25348b6f2c2 hp-ams-esxi5.5-bundle-10.1.0-12.zip

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

This bundle contains the following software versions:

  • hp-ams-550.10.1.0-32

  • hp-smx-limited-550.03.07.00.14

  • char-hpilo-550.9.0.2.3

  • char-hpcru-5.5.6.6

  • hp-esxi-fc-enablement-550.2.2.8

Installing Offline Bundles on an ESXi 5.5 Host Using vSphere CLI 5.5 esxcli Utility

You can use the esxcli utility in conjunction with offline bundles or with a depot. This topic describes the procedure using offline bundles.

Prerequisites
Before you can update or patch an ESXi 5.5 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 5.5 (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphereCLI 5.5, see the VMware vSphere Command-Line Interface Guides at the folloiwng urls:

Procedure 

  1. Power off any virtual machines that are running on the host and place the host into maintenance mode.
  2. Transfer the offline bundle onto the ESXi host local path, or extract it onto an online depot.
  3. Install the bundle on the ESXi host.
    • Install remotely from client, with offline bundle contents on a online depot:  
         esxcli -s <server> -u root -p mypassword software vib install -d <depotURL/bundle-index.xml>
    • Install remotely from client, with offline bundle on ESXi host:  
         esxcli -s <server> -u root -p mypassword software vib install -d <ESXi local path><bundle.zip>
    • Install from ESXi host, with offline bundle on ESXi host:  
         esxcli software vib install -d <ESXi local path><bundle.zip>
  4. After the bundle is installed, reboot the ESXi host for the updates to take effect.
  5. (Optional) Verify that the vibs on the bundle are installed on your ESXi host:
       esxcli -s <server> -u root -p mypassword software vib list
  6. (Optional) Remove individual vibs. <vib name> can be identified by listing the vibs as shown in #5:
       esxcli -s <server> -u root -p mypassword software vib remove -n <vib name>

Installing Offline Bundles on an ESXi 5.5 Host Using VMware vCenter Update Manager

The offline bundle can also be installed from VMware vCenter Update Manager as a patch. For more information and detailed instructions, see the VMware vCenter Update Manager Administration Guide located at http://pubs.vmware.com/vsphere-50/topic/com.vmware.vsphere.update_manager.doc_50/GUID-F7191592-048B-40C7-A610-CFEE6A790AB0.html.


Installing HP ESXi 5.5 AMS Offline Bundle over HP ESXi 5.5 Management Offline Bundle or vice-versa

If the HP Custom ISO or the HP Offline Management Bundle was installed, then no changes are required to use a solution based on Agentless Management vs the full HP Insight management WBEM Providers and visa-versa.   

The following procedure should be performed only if the HP Custom ISO or the HP Offline Management Bundle was installed and afterwards it is desirable to use a solution solely based on Agentless Management.  

Procedure:

  1. Install the HP ESXi 5.5 AMS Offline Bundle.

The following procedure should be performed only if the AMS bundle was installed and afterwards it is desirable to use a solution based on the full HP Insight Management WBEM Providers.

 Procedure:

    1. Install the HP ESXi 5.5 Management Offline Bundle, that includes the full HP Insight Management WBEM Providers


End User License Agreements:
Net-SNMP License
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important:
The HP Agentless Management Service (AMS) Offline Bundle only includes the Limited HP CIM Providers, which only include the providers required to support SmartArray, DIMM Status and iLO reporting in vCenter. The HP Limited Providers are not sufficient to support Online Driver and FW update using HP SUM and the HP SPP.  Online Driver and FW update using HP SUM and the HP SPP requires the full HP CIM providers. Customers can manage their HP ProLiant servers using Agentless Management without installing the HP AMS Offline Bundle as AMS is included in the HP ESXi Offline Bundle. Only customers who intend to manage their HP ProLiant servers using only Agentless Management and do not need the full HP CIM Providers should install the HP AMS Offline Bundle.


Supported Devices and Features:

Supports VMware vSphere 5.5 U2


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


AMS Fix:  

  • When cpqFca3hostCntlrStatusChange trap occurs, the software now reports a FC Port status change from Link Up to Link Down with a trap Severity value of Informational, and a trap Condition value of OK. This change was made to be consistent with other HP management software.
The HP Agentless Management Service (AMS) Offline Bundle only includes the Limited HP CIM Providers, which only include the providers required to support SmartArray, DIMM Status and iLO reporting in vCenter. The HP Limited Providers are not sufficient to support Online Driver and FW update using HP SUM and the HP SPP.  Online Driver and FW update using HP SUM and the HP SPP requires the full HP CIM providers. Customers can manage their HP ProLiant servers using Agentless Management without installing the HP AMS Offline Bundle as AMS is included in the HP ESXi Offline Bundle. Only customers who intend to manage their HP ProLiant servers using only Agentless Management and do not need the full HP CIM Providers should install the HP AMS Offline Bundle.
Version:10.5.0 (25 Oct 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


AMS Fixes

  • Fixed missing driver information in AHS log
  • Fixed missing cpqFca instances at first boot after install with HPE CNAs with Software FCoE for the following adapters:
    • HP FlexFabric 20Gb 2P 630FLB Adptr
    • HP FlexFabric 20Gb 2P 630M Adptr
    • HP FlexFabric 10Gb 2P 536FLB Adptr
    • HPE CN1100R 2P Converged Network Adapter
    • HPE CN1100R-T 2P Converged Network Adapter
    • HP FlexFabric 10Gb 2P 534FLB Adptr
    • HP FlexFabric 10Gb 2P 534FLR-SFP+ Adptr
    • HP FlexFabric 10Gb 2P 534M Adptr
    • HP FlexFabric 10Gb 2P 533FLR-T Adptr

 

Enhancements

AMS features:

  • Added support for new SNMP traps for HPE NVMe PCIe Solid State Drives
  • Added support for HPE NVMe PCIe Solid State Drives in new cpqSePcieDisk MIB

Version:10.4.0 (12 Apr 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


AMS Fixes:

  • Fixed incomplete process names in cpqHoSWRunningName
  • Fixed multiple issues with specific devices in cpqSePciSlotEntry, cpqSePciSlotBoardName and cpqSePciSlotCurrentMode

 

Enhancements

Supports the new Gen9 HPE ProLiant servers with Intel Xeon E5-2600-v4 Series processors

AMS Features:

  • Added support for cpqIdeAtaDiskSSDEstTimeRemainingHours

Version:10.3.0 (16 Nov 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


AMS Fixes:

  • Fixed hrSWInstalledDate to report proper date values instead of zeroes
  • Fixed issue of missing ESX software in hrSWInstalledTable
Enhancements

Supports the new Gen9 HP ProLiant servers with Intel Xeon E3-1200-v5 processors

 


Version:10.2.0 (16 Sep 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


HP AMS Fixes:

  • Fixed issue where the NIC MIB condition is not updated in the cpqHoMibHealthStatusArray in some instances
  • Fixed regression issue of not reporting the HP StorageWorks 81B 8Gb Single Port PCI-e FC HBA and HP StorageWorks 82B 8Gb Dual Port PCI-e FC HBA in the cpqFca MIB

 

Enhancements

HP AMS Features:

  • Reporting of hrSWInstalled MIB
  • Reporting of NIC Option Kit SKU Part Number in cpqNic MIB

Version:10.1.0 (30 Mar 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


AMS Fix:  

  • When cpqFca3hostCntlrStatusChange trap occurs, the software now reports a FC Port status change from Link Up to Link Down with a trap Severity value of Informational, and a trap Condition value of OK. This change was made to be consistent with other HP management software.
Enhancements

AMS New Features:

  • Reporting of SAS/SATA SSD and temperature properties to cpqSasPhyDrvTable MIB
  • Reporting of SATA SSD and temperature properties to cpqIdeAtaDiskTable MIB
  • Supports new cpqSeUSBPortTable MIB, SNMP traps and IML events for new HP Dual 8GB MicroSD EM USB Kit device

Added support for the following servers:

  • HP ProLiant ML10 V2 (only supports the Intel® Xeon® E3-1200)
  • HP ProLiant XL190r Gen9
  • HP ProLiant XL170r Gen9

Version:10.0.1 (19 Sep 2014)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Fix critical AMS issue causing inability to initiate vMotion or enable services, and reporting of HEAP Global errors when attempting to acquire memory.  Issue is documented in VMware KB http://kb.vmware.com/kb/2085618 .
Enhancements

Support for the new HP ProLiant Gen9 servers and their options. The servers include:

  • HP ProLiant DL60 Gen9
  • HP ProLiant DL80 Gen9
  • HP ProLiant DL120 Gen9
  • HP ProLiant DL150 Gen9

Version:10.0.0 (9 Sep 2014)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Fixed cpqHoMibStatusArray status update to properly restore Failed status to OK for client applications, such as HP Systems Insight Manager, to pick up the correct status for NICs,
    FiberChannel, IDE and SAS.
  • Fixed excessive logging when an HP MSA2040 storage is attached to the SAS controller in the system.
     
     
Enhancements

Support for the new HP ProLiant Gen9 servers and their options.The servers include:

  • HP ProLiant DL360 Gen9
  • HP ProLiant DL380 Gen9
  • HP ProLiant BL460c Gen9
  • HP ProLiant ML350 Gen9
  • HP ProLiant DL160 Gen9
  • HP ProLiant DL180 Gen9
  • HP ProLiant XL230a Gen9

 


Version:9.6.0 (17 Jun 2014)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Improved fix for memory leak issue
  • Supports the HP ProLiant XL220a Gen8 v2 Server

Version:9.5.0 (18 Feb 2014)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following fix has been made to HP Agentless Management Service:

  • Fixed excessive logging of elxnet warnings in vmkernel log when an Emulex NIC/CNA and a QLogic CNA configured as NIC-iSCSI are installed on the system
  • Fixed Memory Leak
  • Fixed issue of not reporting ATA Disk Drive Status Change trap
Enhancements

The following are the new enhancements for this release:

  • Added support for Fiber Channel in Agentless Management Service
  • Support for the HP ProLiant DL580 Gen8
  • Supports the Intel® Xeon® E5-4600 v2 processor for the HP ProLiant BL660c Gen8 and HP ProLiant DL560 Gen8

Version:9.4.0 (2 Oct 2013)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Fixed AMS excessive vCenter Logging issue
  • Fixed AMS empty and malformed MAC address in cpqNicIfLogMapMACAddress mib
Enhancements

  • Support for Microserver with Intel® Xeon® Processor E3-1220L v2
  • HP ProLiant BL490c G7 Server
  • Support for Intel® Xeon® E5-2400 v2 processors for EN processors/systems

Type: Software - System Management
Version: 10.1.0(30 Mar 2015)
Operating System(s):
VMware vSphere 5.5

Description

The HP Agentless Management Service (AMS) is a service that provides support for Agentless Management and Active Health. Agentless Management Service provides a wider range of server information (e.g. OS type and version, installed applications, IP addresses) allowing customers to complement hardware management with OS information and alerting. Agentless Management provides Integrated Lights Out (iLO) based robust management without the complexity of OS-based agents. Active Health provides 24x7 mission control for servers, delivering maximum uptime through automated monitoring, diagnostics and alerting. The contents of the HP AMS offline bundle include the latest HP Common Information Model (CIM) Limited Providers, HP Integrated Lights Out (iLO) driver, HP Compaq ROM Utility (CRU) driver, HP Agentless Management Service (AMS) and Fibre Channel (FC) HBA access libraries. The Agentless Management Service (AMS) Offline Bundle only includes the Limited HP CIM Providers which are not sufficient to support Online Driver and FW update using HP Smart Update Manager (HP SUM) and the HP Service Pack for ProLiant (HP SPP).

Enhancements

AMS New Features:

  • Reporting of SAS/SATA SSD and temperature properties to cpqSasPhyDrvTable MIB
  • Reporting of SATA SSD and temperature properties to cpqIdeAtaDiskTable MIB
  • Supports new cpqSeUSBPortTable MIB, SNMP traps and IML events for new HP Dual 8GB MicroSD EM USB Kit device

Added support for the following servers:

  • HP ProLiant ML10 V2 (only supports the Intel® Xeon® E3-1200)
  • HP ProLiant XL190r Gen9
  • HP ProLiant XL170r Gen9

Installation Instructions

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

cfb41d61769a0d5f1a07c25348b6f2c2 hp-ams-esxi5.5-bundle-10.1.0-12.zip

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

This bundle contains the following software versions:

  • hp-ams-550.10.1.0-32

  • hp-smx-limited-550.03.07.00.14

  • char-hpilo-550.9.0.2.3

  • char-hpcru-5.5.6.6

  • hp-esxi-fc-enablement-550.2.2.8

Installing Offline Bundles on an ESXi 5.5 Host Using vSphere CLI 5.5 esxcli Utility

You can use the esxcli utility in conjunction with offline bundles or with a depot. This topic describes the procedure using offline bundles.

Prerequisites
Before you can update or patch an ESXi 5.5 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 5.5 (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphereCLI 5.5, see the VMware vSphere Command-Line Interface Guides at the folloiwng urls:

Procedure 

  1. Power off any virtual machines that are running on the host and place the host into maintenance mode.
  2. Transfer the offline bundle onto the ESXi host local path, or extract it onto an online depot.
  3. Install the bundle on the ESXi host.
    • Install remotely from client, with offline bundle contents on a online depot:  
         esxcli -s <server> -u root -p mypassword software vib install -d <depotURL/bundle-index.xml>
    • Install remotely from client, with offline bundle on ESXi host:  
         esxcli -s <server> -u root -p mypassword software vib install -d <ESXi local path><bundle.zip>
    • Install from ESXi host, with offline bundle on ESXi host:  
         esxcli software vib install -d <ESXi local path><bundle.zip>
  4. After the bundle is installed, reboot the ESXi host for the updates to take effect.
  5. (Optional) Verify that the vibs on the bundle are installed on your ESXi host:
       esxcli -s <server> -u root -p mypassword software vib list
  6. (Optional) Remove individual vibs. <vib name> can be identified by listing the vibs as shown in #5:
       esxcli -s <server> -u root -p mypassword software vib remove -n <vib name>

Installing Offline Bundles on an ESXi 5.5 Host Using VMware vCenter Update Manager

The offline bundle can also be installed from VMware vCenter Update Manager as a patch. For more information and detailed instructions, see the VMware vCenter Update Manager Administration Guide located at http://pubs.vmware.com/vsphere-50/topic/com.vmware.vsphere.update_manager.doc_50/GUID-F7191592-048B-40C7-A610-CFEE6A790AB0.html.


Installing HP ESXi 5.5 AMS Offline Bundle over HP ESXi 5.5 Management Offline Bundle or vice-versa

If the HP Custom ISO or the HP Offline Management Bundle was installed, then no changes are required to use a solution based on Agentless Management vs the full HP Insight management WBEM Providers and visa-versa.   

The following procedure should be performed only if the HP Custom ISO or the HP Offline Management Bundle was installed and afterwards it is desirable to use a solution solely based on Agentless Management.  

Procedure:

  1. Install the HP ESXi 5.5 AMS Offline Bundle.

The following procedure should be performed only if the AMS bundle was installed and afterwards it is desirable to use a solution based on the full HP Insight Management WBEM Providers.

 Procedure:

    1. Install the HP ESXi 5.5 Management Offline Bundle, that includes the full HP Insight Management WBEM Providers


Release Notes

End User License Agreements:
Net-SNMP License
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important:
The HP Agentless Management Service (AMS) Offline Bundle only includes the Limited HP CIM Providers, which only include the providers required to support SmartArray, DIMM Status and iLO reporting in vCenter. The HP Limited Providers are not sufficient to support Online Driver and FW update using HP SUM and the HP SPP.  Online Driver and FW update using HP SUM and the HP SPP requires the full HP CIM providers. Customers can manage their HP ProLiant servers using Agentless Management without installing the HP AMS Offline Bundle as AMS is included in the HP ESXi Offline Bundle. Only customers who intend to manage their HP ProLiant servers using only Agentless Management and do not need the full HP CIM Providers should install the HP AMS Offline Bundle.


Supported Devices and Features:

Supports VMware vSphere 5.5 U2


Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


AMS Fix:  

  • When cpqFca3hostCntlrStatusChange trap occurs, the software now reports a FC Port status change from Link Up to Link Down with a trap Severity value of Informational, and a trap Condition value of OK. This change was made to be consistent with other HP management software.

Important

The HP Agentless Management Service (AMS) Offline Bundle only includes the Limited HP CIM Providers, which only include the providers required to support SmartArray, DIMM Status and iLO reporting in vCenter. The HP Limited Providers are not sufficient to support Online Driver and FW update using HP SUM and the HP SPP.  Online Driver and FW update using HP SUM and the HP SPP requires the full HP CIM providers. Customers can manage their HP ProLiant servers using Agentless Management without installing the HP AMS Offline Bundle as AMS is included in the HP ESXi Offline Bundle. Only customers who intend to manage their HP ProLiant servers using only Agentless Management and do not need the full HP CIM Providers should install the HP AMS Offline Bundle.

Revision History

Version:10.5.0 (25 Oct 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


AMS Fixes

  • Fixed missing driver information in AHS log
  • Fixed missing cpqFca instances at first boot after install with HPE CNAs with Software FCoE for the following adapters:
    • HP FlexFabric 20Gb 2P 630FLB Adptr
    • HP FlexFabric 20Gb 2P 630M Adptr
    • HP FlexFabric 10Gb 2P 536FLB Adptr
    • HPE CN1100R 2P Converged Network Adapter
    • HPE CN1100R-T 2P Converged Network Adapter
    • HP FlexFabric 10Gb 2P 534FLB Adptr
    • HP FlexFabric 10Gb 2P 534FLR-SFP+ Adptr
    • HP FlexFabric 10Gb 2P 534M Adptr
    • HP FlexFabric 10Gb 2P 533FLR-T Adptr

 

Enhancements

AMS features:

  • Added support for new SNMP traps for HPE NVMe PCIe Solid State Drives
  • Added support for HPE NVMe PCIe Solid State Drives in new cpqSePcieDisk MIB

Version:10.4.0 (12 Apr 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


AMS Fixes:

  • Fixed incomplete process names in cpqHoSWRunningName
  • Fixed multiple issues with specific devices in cpqSePciSlotEntry, cpqSePciSlotBoardName and cpqSePciSlotCurrentMode

 

Enhancements

Supports the new Gen9 HPE ProLiant servers with Intel Xeon E5-2600-v4 Series processors

AMS Features:

  • Added support for cpqIdeAtaDiskSSDEstTimeRemainingHours

Version:10.3.0 (16 Nov 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


AMS Fixes:

  • Fixed hrSWInstalledDate to report proper date values instead of zeroes
  • Fixed issue of missing ESX software in hrSWInstalledTable
Enhancements

Supports the new Gen9 HP ProLiant servers with Intel Xeon E3-1200-v5 processors

 


Version:10.2.0 (16 Sep 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


HP AMS Fixes:

  • Fixed issue where the NIC MIB condition is not updated in the cpqHoMibHealthStatusArray in some instances
  • Fixed regression issue of not reporting the HP StorageWorks 81B 8Gb Single Port PCI-e FC HBA and HP StorageWorks 82B 8Gb Dual Port PCI-e FC HBA in the cpqFca MIB

 

Enhancements

HP AMS Features:

  • Reporting of hrSWInstalled MIB
  • Reporting of NIC Option Kit SKU Part Number in cpqNic MIB

Version:10.1.0 (30 Mar 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


AMS Fix:  

  • When cpqFca3hostCntlrStatusChange trap occurs, the software now reports a FC Port status change from Link Up to Link Down with a trap Severity value of Informational, and a trap Condition value of OK. This change was made to be consistent with other HP management software.
Enhancements

AMS New Features:

  • Reporting of SAS/SATA SSD and temperature properties to cpqSasPhyDrvTable MIB
  • Reporting of SATA SSD and temperature properties to cpqIdeAtaDiskTable MIB
  • Supports new cpqSeUSBPortTable MIB, SNMP traps and IML events for new HP Dual 8GB MicroSD EM USB Kit device

Added support for the following servers:

  • HP ProLiant ML10 V2 (only supports the Intel® Xeon® E3-1200)
  • HP ProLiant XL190r Gen9
  • HP ProLiant XL170r Gen9

Version:10.0.1 (19 Sep 2014)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Fix critical AMS issue causing inability to initiate vMotion or enable services, and reporting of HEAP Global errors when attempting to acquire memory.  Issue is documented in VMware KB http://kb.vmware.com/kb/2085618 .
Enhancements

Support for the new HP ProLiant Gen9 servers and their options. The servers include:

  • HP ProLiant DL60 Gen9
  • HP ProLiant DL80 Gen9
  • HP ProLiant DL120 Gen9
  • HP ProLiant DL150 Gen9

Version:10.0.0 (9 Sep 2014)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Fixed cpqHoMibStatusArray status update to properly restore Failed status to OK for client applications, such as HP Systems Insight Manager, to pick up the correct status for NICs,
    FiberChannel, IDE and SAS.
  • Fixed excessive logging when an HP MSA2040 storage is attached to the SAS controller in the system.
     
     
Enhancements

Support for the new HP ProLiant Gen9 servers and their options.The servers include:

  • HP ProLiant DL360 Gen9
  • HP ProLiant DL380 Gen9
  • HP ProLiant BL460c Gen9
  • HP ProLiant ML350 Gen9
  • HP ProLiant DL160 Gen9
  • HP ProLiant DL180 Gen9
  • HP ProLiant XL230a Gen9

 


Version:9.6.0 (17 Jun 2014)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Improved fix for memory leak issue
  • Supports the HP ProLiant XL220a Gen8 v2 Server

Version:9.5.0 (18 Feb 2014)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following fix has been made to HP Agentless Management Service:

  • Fixed excessive logging of elxnet warnings in vmkernel log when an Emulex NIC/CNA and a QLogic CNA configured as NIC-iSCSI are installed on the system
  • Fixed Memory Leak
  • Fixed issue of not reporting ATA Disk Drive Status Change trap
Enhancements

The following are the new enhancements for this release:

  • Added support for Fiber Channel in Agentless Management Service
  • Support for the HP ProLiant DL580 Gen8
  • Supports the Intel® Xeon® E5-4600 v2 processor for the HP ProLiant BL660c Gen8 and HP ProLiant DL560 Gen8

Version:9.4.0 (2 Oct 2013)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Fixed AMS excessive vCenter Logging issue
  • Fixed AMS empty and malformed MAC address in cpqNicIfLogMapMACAddress mib
Enhancements

  • Support for Microserver with Intel® Xeon® Processor E3-1220L v2
  • HP ProLiant BL490c G7 Server
  • Support for Intel® Xeon® E5-2400 v2 processors for EN processors/systems

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.