Printable version

Drivers & software

* RECOMMENDED * HP Proliant Smart Array Embedded SATA RAID Controller Driver for Windows 2003/2008 x64 Editions

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Driver - Storage
Version: 6.8.0.64(18 Aug 2009)
Operating System(s): Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 Essential Business
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 Small Business
Microsoft Windows Server 2008 x64
File name: cp010929.exe (699 KB)
This driver provides support for the HP Smart Array B110i SATA RAID Controller on Microsoft Windows Server 2003/2008 x64 Editions.

Added support for the following operating systems:

  • Microsoft Windows Server 2008 R2
  • Microsoft Windows Server 2008 R2 Foundation Edition

Enhanced component-level logging has been implemented in the smart component installer. The generated log file will be located on the target system in %SYSTEMROOT%\cpqsystem\log directory under the name CPQSETUP.LOG.

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

6bcb2d0cf72220bc578e019568dc82ef1af6a1c5b50433979c8d7683f48fbf0d cp010929.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Improved error reporting on Seagate 1 TB drives in a RAID 0 configuration with a bad block on LBA 0 so that drive is no longer marked as failed.

Version:6.18.0.64 (B) (22 May 2013)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

If the target controller was successfully updated to version 6.18.0.64(A) of this driver, then it is not necessary to update to version 6.18.0.64(B)


Support added for Microsoft Windows Small Business Server 2011 Standard and Essentials


Version:6.18.0.64 (A) (7 Dec 2012)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

If the target controller was successfully updated to version 6.18.0.64, then it is not necessary to update to version 6.18.0.64(A )


  • Corrects an issue where HP B110i would try to resume the rebuild progress if the drive was replaced while the server was offline.
  • To improve rebuild time, ensure that drive write cache is enabled during rebuild and disabled when rebuild completes.

Version:6.18.0.64 (24 Apr 2012)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


  • Corrects an issue where HP B110i would try to resume the rebuild progress if the drive was replaced while the server was offline.
  • To improve rebuild time, ensure that drive write cache is enabled during rebuild and disabled when rebuild completes.

Version:6.16.0.64 (5 Apr 2011)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Fixed case where the negotiated speed displayed was not properly updated after hot add of a hard drive.

Enhancements

Added support for the HP ProLiant ML110 G7 and HP ProLiant DL120 G7.


Version:6.14.0.64 (5 Oct 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Return port number for removed drives for use by SNMP management agent.

Enhanced bad block management to handle multiple blocks in a single RAID 1 or 1+0 stripe.


Version:6.12.0.64 (21 Jun 2010)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Correctly report to the SNMP HP ProLiant Management Storage Agent that Monitor and Performance Data reporting is not supported.

Enhancements

Added support to differentiate between a Solid State and SATA hard drives.

HP Array Configuration Utility and HP System Management Home Page will now show port number for missing drives.


Version:6.10.2.64 (25 Mar 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


New support for the HP ProLiant DL165 G7 and HP ProLiant SL165z G7 servers.


Version:6.10.0.64 (8 Mar 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Added support for hot-plug of physical hard drives as a licensable feature.

Added support for HP ProLiant ML110 G6 and HP ProLiant DL120 G6 Servers including optical device support.

Improved error handling for Western Digital drives when a bad block exists on LBA 0 of a non fault tolerant volume.


Version:6.8.0.64 (18 Aug 2009)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Improved error reporting on Seagate 1 TB drives in a RAID 0 configuration with a bad block on LBA 0 so that drive is no longer marked as failed.

Enhancements

Added support for the following operating systems:

  • Microsoft Windows Server 2008 R2
  • Microsoft Windows Server 2008 R2 Foundation Edition

Enhanced component-level logging has been implemented in the smart component installer. The generated log file will be located on the target system in %SYSTEMROOT%\cpqsystem\log directory under the name CPQSETUP.LOG.


Version:6.6.2.64 (20 May 2009)
Fixes

Fixed drive model number issue in applications (ACU/ACU-CLI/Agents/ADU).

Fixed an issue with reporting logical I/O request errors when no errors actually occurred.

Fixed Smart Error reporting issue.

Fixed hibernation issue when a certain type of drive failure is present.

Enhancements

Added LED functionality support.

Added support for Microsoft Windows Foundation Server 2008.

System performance enhancement.


Version:6.6.0.64 (6 May 2009)
Fixes

Fixed drive model number issue in applications (ACU/ACU-CLI/Agents/ADU).

Fixed an issue with reporting logical I/O request errors when no errors actually occurred.

Fixed Smart Error reporting issue.

Fixed hibernation issue when a certain type of drive failure is present.

Enhancements

Added LED functionality support.

Added support for Microsoft Windows Foundation Server 2008.


Version:6.4.0.64 (18 Feb 2009)
Enhancements
Initial Release for HP Smart Array B110i SATA RAID Controller.

Type: Driver - Storage
Version: 6.8.0.64(18 Aug 2009)
Operating System(s):
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 Essential Business
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 Small Business
Microsoft Windows Server 2008 x64

Description

This driver provides support for the HP Smart Array B110i SATA RAID Controller on Microsoft Windows Server 2003/2008 x64 Editions.

Enhancements

Added support for the following operating systems:

  • Microsoft Windows Server 2008 R2
  • Microsoft Windows Server 2008 R2 Foundation Edition

Enhanced component-level logging has been implemented in the smart component installer. The generated log file will be located on the target system in %SYSTEMROOT%\cpqsystem\log directory under the name CPQSETUP.LOG.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

6bcb2d0cf72220bc578e019568dc82ef1af6a1c5b50433979c8d7683f48fbf0d cp010929.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Improved error reporting on Seagate 1 TB drives in a RAID 0 configuration with a bad block on LBA 0 so that drive is no longer marked as failed.

Revision History

Version:6.18.0.64 (B) (22 May 2013)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

If the target controller was successfully updated to version 6.18.0.64(A) of this driver, then it is not necessary to update to version 6.18.0.64(B)


Support added for Microsoft Windows Small Business Server 2011 Standard and Essentials


Version:6.18.0.64 (A) (7 Dec 2012)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

If the target controller was successfully updated to version 6.18.0.64, then it is not necessary to update to version 6.18.0.64(A )


  • Corrects an issue where HP B110i would try to resume the rebuild progress if the drive was replaced while the server was offline.
  • To improve rebuild time, ensure that drive write cache is enabled during rebuild and disabled when rebuild completes.

Version:6.18.0.64 (24 Apr 2012)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


  • Corrects an issue where HP B110i would try to resume the rebuild progress if the drive was replaced while the server was offline.
  • To improve rebuild time, ensure that drive write cache is enabled during rebuild and disabled when rebuild completes.

Version:6.16.0.64 (5 Apr 2011)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Fixed case where the negotiated speed displayed was not properly updated after hot add of a hard drive.

Enhancements

Added support for the HP ProLiant ML110 G7 and HP ProLiant DL120 G7.


Version:6.14.0.64 (5 Oct 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Return port number for removed drives for use by SNMP management agent.

Enhanced bad block management to handle multiple blocks in a single RAID 1 or 1+0 stripe.


Version:6.12.0.64 (21 Jun 2010)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Correctly report to the SNMP HP ProLiant Management Storage Agent that Monitor and Performance Data reporting is not supported.

Enhancements

Added support to differentiate between a Solid State and SATA hard drives.

HP Array Configuration Utility and HP System Management Home Page will now show port number for missing drives.


Version:6.10.2.64 (25 Mar 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


New support for the HP ProLiant DL165 G7 and HP ProLiant SL165z G7 servers.


Version:6.10.0.64 (8 Mar 2010)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Added support for hot-plug of physical hard drives as a licensable feature.

Added support for HP ProLiant ML110 G6 and HP ProLiant DL120 G6 Servers including optical device support.

Improved error handling for Western Digital drives when a bad block exists on LBA 0 of a non fault tolerant volume.


Version:6.8.0.64 (18 Aug 2009)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Improved error reporting on Seagate 1 TB drives in a RAID 0 configuration with a bad block on LBA 0 so that drive is no longer marked as failed.

Enhancements

Added support for the following operating systems:

  • Microsoft Windows Server 2008 R2
  • Microsoft Windows Server 2008 R2 Foundation Edition

Enhanced component-level logging has been implemented in the smart component installer. The generated log file will be located on the target system in %SYSTEMROOT%\cpqsystem\log directory under the name CPQSETUP.LOG.


Version:6.6.2.64 (20 May 2009)
Fixes

Fixed drive model number issue in applications (ACU/ACU-CLI/Agents/ADU).

Fixed an issue with reporting logical I/O request errors when no errors actually occurred.

Fixed Smart Error reporting issue.

Fixed hibernation issue when a certain type of drive failure is present.

Enhancements

Added LED functionality support.

Added support for Microsoft Windows Foundation Server 2008.

System performance enhancement.


Version:6.6.0.64 (6 May 2009)
Fixes

Fixed drive model number issue in applications (ACU/ACU-CLI/Agents/ADU).

Fixed an issue with reporting logical I/O request errors when no errors actually occurred.

Fixed Smart Error reporting issue.

Fixed hibernation issue when a certain type of drive failure is present.

Enhancements

Added LED functionality support.

Added support for Microsoft Windows Foundation Server 2008.


Version:6.4.0.64 (18 Feb 2009)
Enhancements
Initial Release for HP Smart Array B110i SATA RAID Controller.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.