Printable version

Drivers & software

* RECOMMENDED * *OBSOLETE* HPE OneView Update Readiness Checker

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Utility - Tools
Version: 1.11(27 Oct 2020)
Operating System(s): OS Independent
OBSOLETE - OV-URC Version 1.11 is NO LONGER SUPPORTED BY HPE and is therefore NO LONGER AVAILABLE for download. The current replacement version is always available at https://www.hpe.com/support/ov-urc . Click the "Obtain software" link to access the current version. The HPE Update Readiness Checker assesses the health of an HPE OneView appliance with respect to a set of known issues before proceeding with an appliance update.

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.11 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release.

  • Adds support for OneView 5.4

Prerequisites:

  • Licensing
    • Use of this software is subject to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement found here.
    • Customers may obtain license information for the open source software used in HPE OneView Update Readiness Checker at this site. The sources for the open source software used in HPE OneView Update Readiness Checker may be obtained at the HPE Open Source Download Site.
  • Network access to the HPE OneView appliance
    • The client system where OneView Update Readiness Checker is run should have network access to the HPE OneView appliance. The Update Readiness Checker requires credentials for a user who has the "Infrastructure Administrator" role, and the IP address or FQDN of a target OneView appliance to run the checks against.
  • Two-factor authentication
    • Note: When using the Update Readiness Checker with a OneView appliance configured for two-factor authentication, ensure that “Smart card only” option is not enabled. See the Settings->Security->Authentication page in the HPE OneView user interface for details.
  • Certificate requirements
    • For secure communication between the client system and the OneView appliance, certificates for the target OneView appliance are required to be trusted certificates. Thus, the certificate is either signed by a trusted Certificate Authority or imported into the client system's certificate trust store prior to running the update readiness checker. If you need to import a certificate, see instructions under 'APPENDIX A - Certificate Requirements' in the README.txt to import the certificate.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

8c26930b4aed4e375769b9b7849b02a9af78a11abcfd4e06b1b28541205e7817 oneview-update-readiness-checker-0426783.zip
719c4b3ba57c7d62d6a04c869ebe35da96f24560c2e1984ff5dd7668b1597706 oneview-update-readiness-checker-0426783.zip.sha256
62bc94f21395df12441a5c498ae8a81002131827ed0e01a0e7f719abcfdf9f9f oneview-update-readiness-checker-0426783.zip.sig

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

  1. Click the Download button above to retrieve the zip file 
    • The other two files (.sig and .sha256) are used to validate the digital signature
    • If you would like to validate the digital signature of this download, please refer to this site.
  2. Unzip the file, which includes the following files:
    • ov-urc.exe - executable for Microsoft Windows enviroments
    • ov-urc - executable for Linux environments
    • ov-urc-xxxxxx.bin - uploaded to HPE OneView, required for running HPE Update Readiness Checker on the target appliance
    • README.txt - instructions for using the HPE OneView Update Readiness Checker tool
    • release_notes.txt - revision history of the checker
  3. Review README.txt for usage instructions.

  4. Run the executable appropriate for your platform. e.g ov-urc -ovHostname <oneview appliance hostname or IP address> -username <username>


End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

OBSOLETE - OV-URC Version 1.11 is NO LONGER SUPPORTED BY HPE and is therefore NO LONGER AVAILABLE for download. The current replacement version is always available at https://www.hpe.com/support/ov-urc . Click the "Obtain software" link to access the current version.

 

Before you perform an HPE OneView appliance update, the intended procedure is as follows:

1. Download and extract the latest version of the utility on a client system.

2. If the client system does not already have the appliance certificate imported, import the appliance certificate on the client system (one time operation).

3. Run the latest version of the checker before performing an appliance update.

4. Review the results and address any issues identified before performing the update.

Before running the checker, validate that you are running the latest version by checking the HPE Support Center (HPESC) website and do the following steps:

  1. Enter HPE OneView in the search field and click search icon or press enter key.
  2. Select HPE OneView from the search results to open the HPESC Product Support page for HPE OneView.
  3. The latest version of HPE OneView Update Readiness Checker should display on this HPESC Product Support page.

The Update Readiness Checker is executed on a client system outside the HPE OneView appliance and is supported on Windows and Linux platforms.

  • The checker is supported with HPE OneView version 4.20 and newer on Synergy Composer and VM appliances.
  • Update Readiness Checker is not supported with HPE Image Streamer appliances.

Running the Checker

Run the checker using the following:

ov-urc -ovHostname <oneview appliance hostname or IP address> -username <username>

There are additional options available, including arguments to specify a directory service domain or acknowledge the OneView login message as needed. Use the -help argument to list details for all the options available.  E.g. ov-urc -help

Results

The results are displayed in the console and saved in a file named 'ov-urc.log'. The results are also logged via a OneView task that can be viewed in the Activity view in the UI.

Only issues that require attention/remediation will be noted in the output. Review the output results and take the appropriate actions as outlined in any recommendations listed.


OBSOLETE - OV-URC Version 1.11 is NO LONGER SUPPORTED BY HPE and is therefore NO LONGER AVAILABLE for download. The current replacement version is always available at https://www.hpe.com/support/ov-urc . Click the "Obtain software" link to access the current version.

 

Before you perform an HPE OneView appliance update, the intended procedure is as follows:

1. Download and extract the latest version of the utility on a client system.

2. If the client system does not already have the appliance certificate imported, import the appliance certificate on the client system (one time operation).

3. Run the latest version of the checker before performing an appliance update.

4. Review the results and address any issues identified before performing the update.

Before running the checker, validate that you are running the latest version by checking the HPE Support Center (HPESC) website and do the following steps:

  1. Enter HPE OneView in the search field and click search icon or press enter key.
  2. Select HPE OneView from the search results to open the HPESC Product Support page for HPE OneView.
  3. The latest version of HPE OneView Update Readiness Checker should display on this HPESC Product Support page.

The Update Readiness Checker is executed on a client system outside the HPE OneView appliance and is supported on Windows and Linux platforms.

  • The checker is supported with HPE OneView version 4.20 and newer on Synergy Composer and VM appliances.
  • Update Readiness Checker is not supported with HPE Image Streamer appliances.

Running the Checker

Run the checker using the following:

ov-urc -ovHostname <oneview appliance hostname or IP address> -username <username>

There are additional options available, including arguments to specify a directory service domain or acknowledge the OneView login message as needed. Use the -help argument to list details for all the options available.  E.g. ov-urc -help

Results

The results are displayed in the console and saved in a file named 'ov-urc.log'. The results are also logged via a OneView task that can be viewed in the Activity view in the UI.

Only issues that require attention/remediation will be noted in the output. Review the output results and take the appropriate actions as outlined in any recommendations listed.

Version:1.12 (24 Jan 2021)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixes an issue with a previously released check for old OneView tasks that did not complete, where in some cases the check could still fail even after the correct resolution script has run.

Enhancements

Adds a check for HPE Synergy Composer2 firmware version.

Enabled to run on OneView 5.5 and subsequent OneView Releases.


Version:1.11 (27 Oct 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.11 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release.

  • Adds support for OneView 5.4

Version:1.10 (14 Sep 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE - OV-URC Version 1.10 is NO LONGER SUPPORTED BY HPE and is therefore NO LONGER AVAILABLE for download. The current replacement version is always available at https://www.hpe.com/support/ov-urc . Click the "Obtain software" link to access the current version.

 

  • Added improved error messaging when running the checker with an update in progress or staged
Enhancements

OBSOLETE - OV-URC Version 1.10 is NO LONGER SUPPORTED BY HPE and is therefore NO LONGER AVAILABLE for download. The current replacement version is always available at https://www.hpe.com/support/ov-urc . Click the "Obtain software" link to access the current version.

 

  • New check for duplicate compliance database entries

Version:1.9 (22 Jul 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.9 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

  • New check for old non-terminal tasks
  • New check for tasks with empty parent

Version:1.8 (1 Jul 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.8 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

New check for Customer Advisory a00101430 where rack servers with old FC HBA firmware may reboot after update.


Version:1.7 (29 May 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.7 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download. All of its functionality and more has been subsumed into the current release.

 

Removed software package configuration check fixed with OneView 5.20.01


Version:1.6 (19 May 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.6 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release.

 

New check for software package configuration


Version:1.5 (15 May 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.5 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

New check for logical interconnect database entries
New check for Synergy Composer (1st gen) running OneView 5.20 and maximum number of supported frames


Version:1.4 (17 Apr 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.4 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

New check for alert entries


Version:1.3 (3 Apr 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.3 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

The following issues are resolved in this version:

  • Unable to display checker results when appliance locale is not English
Enhancements

OBSOLETE: OneView Update Readiness Checker version 1.3 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

New check for task entries


Version:1.2 (13 Mar 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.2 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download. All of its functionality and more has been subsumed into the current release.

New checks for database entries

Messaging improvements

README and file name improvements


Version:1.1 (7 Feb 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.1 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 


The following issues are resolved in this version:

  • Unable to display checker results and displays “unable to fetch fixme installation details…”
Enhancements

OBSOLETE: OneView Update Readiness Checker version 1.1 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

Messaging improvements


Version:1.00 (3 Feb 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.00 is NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

Enhancements

OBSOLETE: OneView Update Readiness Checker version 1.00 is NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

Initial release of HPE OneView Update Readiness Checker


Type: Utility - Tools
Version: 1.11(27 Oct 2020)
Operating System(s):
OS Independent

Description

OBSOLETE - OV-URC Version 1.11 is NO LONGER SUPPORTED BY HPE and is therefore NO LONGER AVAILABLE for download. The current replacement version is always available at https://www.hpe.com/support/ov-urc . Click the "Obtain software" link to access the current version. The HPE Update Readiness Checker assesses the health of an HPE OneView appliance with respect to a set of known issues before proceeding with an appliance update.

Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.11 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release.

  • Adds support for OneView 5.4

Installation Instructions

Prerequisites:

  • Licensing
    • Use of this software is subject to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement found here.
    • Customers may obtain license information for the open source software used in HPE OneView Update Readiness Checker at this site. The sources for the open source software used in HPE OneView Update Readiness Checker may be obtained at the HPE Open Source Download Site.
  • Network access to the HPE OneView appliance
    • The client system where OneView Update Readiness Checker is run should have network access to the HPE OneView appliance. The Update Readiness Checker requires credentials for a user who has the "Infrastructure Administrator" role, and the IP address or FQDN of a target OneView appliance to run the checks against.
  • Two-factor authentication
    • Note: When using the Update Readiness Checker with a OneView appliance configured for two-factor authentication, ensure that “Smart card only” option is not enabled. See the Settings->Security->Authentication page in the HPE OneView user interface for details.
  • Certificate requirements
    • For secure communication between the client system and the OneView appliance, certificates for the target OneView appliance are required to be trusted certificates. Thus, the certificate is either signed by a trusted Certificate Authority or imported into the client system's certificate trust store prior to running the update readiness checker. If you need to import a certificate, see instructions under 'APPENDIX A - Certificate Requirements' in the README.txt to import the certificate.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

8c26930b4aed4e375769b9b7849b02a9af78a11abcfd4e06b1b28541205e7817 oneview-update-readiness-checker-0426783.zip
719c4b3ba57c7d62d6a04c869ebe35da96f24560c2e1984ff5dd7668b1597706 oneview-update-readiness-checker-0426783.zip.sha256
62bc94f21395df12441a5c498ae8a81002131827ed0e01a0e7f719abcfdf9f9f oneview-update-readiness-checker-0426783.zip.sig

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

  1. Click the Download button above to retrieve the zip file 
    • The other two files (.sig and .sha256) are used to validate the digital signature
    • If you would like to validate the digital signature of this download, please refer to this site.
  2. Unzip the file, which includes the following files:
    • ov-urc.exe - executable for Microsoft Windows enviroments
    • ov-urc - executable for Linux environments
    • ov-urc-xxxxxx.bin - uploaded to HPE OneView, required for running HPE Update Readiness Checker on the target appliance
    • README.txt - instructions for using the HPE OneView Update Readiness Checker tool
    • release_notes.txt - revision history of the checker
  3. Review README.txt for usage instructions.

  4. Run the executable appropriate for your platform. e.g ov-urc -ovHostname <oneview appliance hostname or IP address> -username <username>


Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

OBSOLETE - OV-URC Version 1.11 is NO LONGER SUPPORTED BY HPE and is therefore NO LONGER AVAILABLE for download. The current replacement version is always available at https://www.hpe.com/support/ov-urc . Click the "Obtain software" link to access the current version.

 

Before you perform an HPE OneView appliance update, the intended procedure is as follows:

1. Download and extract the latest version of the utility on a client system.

2. If the client system does not already have the appliance certificate imported, import the appliance certificate on the client system (one time operation).

3. Run the latest version of the checker before performing an appliance update.

4. Review the results and address any issues identified before performing the update.

Before running the checker, validate that you are running the latest version by checking the HPE Support Center (HPESC) website and do the following steps:

  1. Enter HPE OneView in the search field and click search icon or press enter key.
  2. Select HPE OneView from the search results to open the HPESC Product Support page for HPE OneView.
  3. The latest version of HPE OneView Update Readiness Checker should display on this HPESC Product Support page.

The Update Readiness Checker is executed on a client system outside the HPE OneView appliance and is supported on Windows and Linux platforms.

  • The checker is supported with HPE OneView version 4.20 and newer on Synergy Composer and VM appliances.
  • Update Readiness Checker is not supported with HPE Image Streamer appliances.

Running the Checker

Run the checker using the following:

ov-urc -ovHostname <oneview appliance hostname or IP address> -username <username>

There are additional options available, including arguments to specify a directory service domain or acknowledge the OneView login message as needed. Use the -help argument to list details for all the options available.  E.g. ov-urc -help

Results

The results are displayed in the console and saved in a file named 'ov-urc.log'. The results are also logged via a OneView task that can be viewed in the Activity view in the UI.

Only issues that require attention/remediation will be noted in the output. Review the output results and take the appropriate actions as outlined in any recommendations listed.


Important

OBSOLETE - OV-URC Version 1.11 is NO LONGER SUPPORTED BY HPE and is therefore NO LONGER AVAILABLE for download. The current replacement version is always available at https://www.hpe.com/support/ov-urc . Click the "Obtain software" link to access the current version.

 

Before you perform an HPE OneView appliance update, the intended procedure is as follows:

1. Download and extract the latest version of the utility on a client system.

2. If the client system does not already have the appliance certificate imported, import the appliance certificate on the client system (one time operation).

3. Run the latest version of the checker before performing an appliance update.

4. Review the results and address any issues identified before performing the update.

Before running the checker, validate that you are running the latest version by checking the HPE Support Center (HPESC) website and do the following steps:

  1. Enter HPE OneView in the search field and click search icon or press enter key.
  2. Select HPE OneView from the search results to open the HPESC Product Support page for HPE OneView.
  3. The latest version of HPE OneView Update Readiness Checker should display on this HPESC Product Support page.

The Update Readiness Checker is executed on a client system outside the HPE OneView appliance and is supported on Windows and Linux platforms.

  • The checker is supported with HPE OneView version 4.20 and newer on Synergy Composer and VM appliances.
  • Update Readiness Checker is not supported with HPE Image Streamer appliances.

Running the Checker

Run the checker using the following:

ov-urc -ovHostname <oneview appliance hostname or IP address> -username <username>

There are additional options available, including arguments to specify a directory service domain or acknowledge the OneView login message as needed. Use the -help argument to list details for all the options available.  E.g. ov-urc -help

Results

The results are displayed in the console and saved in a file named 'ov-urc.log'. The results are also logged via a OneView task that can be viewed in the Activity view in the UI.

Only issues that require attention/remediation will be noted in the output. Review the output results and take the appropriate actions as outlined in any recommendations listed.

Revision History

Version:1.12 (24 Jan 2021)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixes an issue with a previously released check for old OneView tasks that did not complete, where in some cases the check could still fail even after the correct resolution script has run.

Enhancements

Adds a check for HPE Synergy Composer2 firmware version.

Enabled to run on OneView 5.5 and subsequent OneView Releases.


Version:1.11 (27 Oct 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.11 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release.

  • Adds support for OneView 5.4

Version:1.10 (14 Sep 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE - OV-URC Version 1.10 is NO LONGER SUPPORTED BY HPE and is therefore NO LONGER AVAILABLE for download. The current replacement version is always available at https://www.hpe.com/support/ov-urc . Click the "Obtain software" link to access the current version.

 

  • Added improved error messaging when running the checker with an update in progress or staged
Enhancements

OBSOLETE - OV-URC Version 1.10 is NO LONGER SUPPORTED BY HPE and is therefore NO LONGER AVAILABLE for download. The current replacement version is always available at https://www.hpe.com/support/ov-urc . Click the "Obtain software" link to access the current version.

 

  • New check for duplicate compliance database entries

Version:1.9 (22 Jul 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.9 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

  • New check for old non-terminal tasks
  • New check for tasks with empty parent

Version:1.8 (1 Jul 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.8 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

New check for Customer Advisory a00101430 where rack servers with old FC HBA firmware may reboot after update.


Version:1.7 (29 May 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.7 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download. All of its functionality and more has been subsumed into the current release.

 

Removed software package configuration check fixed with OneView 5.20.01


Version:1.6 (19 May 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.6 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release.

 

New check for software package configuration


Version:1.5 (15 May 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.5 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

New check for logical interconnect database entries
New check for Synergy Composer (1st gen) running OneView 5.20 and maximum number of supported frames


Version:1.4 (17 Apr 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.4 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

New check for alert entries


Version:1.3 (3 Apr 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.3 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

The following issues are resolved in this version:

  • Unable to display checker results when appliance locale is not English
Enhancements

OBSOLETE: OneView Update Readiness Checker version 1.3 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

New check for task entries


Version:1.2 (13 Mar 2020)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.2 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download. All of its functionality and more has been subsumed into the current release.

New checks for database entries

Messaging improvements

README and file name improvements


Version:1.1 (7 Feb 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.1 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 


The following issues are resolved in this version:

  • Unable to display checker results and displays “unable to fetch fixme installation details…”
Enhancements

OBSOLETE: OneView Update Readiness Checker version 1.1 is NO LONGER SUPPORTED BY HPE and NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

Messaging improvements


Version:1.00 (3 Feb 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


OBSOLETE: OneView Update Readiness Checker version 1.00 is NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

Enhancements

OBSOLETE: OneView Update Readiness Checker version 1.00 is NO LONGER AVAILABLE for download.  All of its functionality and more has been subsumed into the current release. 

 

Initial release of HPE OneView Update Readiness Checker


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.