Printable version

Drivers & software

* RECOMMENDED * Online Power Supply Flash Component for Linux - HPE Flexible Slot Power Supplies

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - Power Management
Version: 2020.08.03(4 Sep 2020)
Operating System(s): CentOS 7
CentOS 8
Debian GNU/Linux 10.0
Debian GNU/Linux 9.0
Oracle Linux 6 (AMD64/EMT64)
Oracle Linux 7
Red Hat Enterprise Linux 7 Server
Red Hat Enterprise Linux 8 Server
SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 15
Ubuntu 18.04
Multi-part download
File name: firmware-powersupply-gen10powersupply-2020.08.03-1.1.x86_64.compsig (2.0 KB)
File name: firmware-powersupply-gen10powersupply-2020.08.03-1.1.x86_64.rpm (227 KB)
This component provides updated power supply firmware that can be installed directly on supported Operating Systems.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

ec0fa54e912118dff653f223f7f4b49c0ff6f4e71ab3e931d3ee2d71ce8c4a96 RPMS/x86_64/firmware-powersupply-gen10powersupply-2020.08.03-1.1.x86_64.compsig
7cfe21e1003c148e29002f9e89107fa9d2bd76262ed603c4812311f0ef916f0d RPMS/x86_64/firmware-powersupply-gen10powersupply-2020.08.03-1.1.x86_64.rpm

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To install the Smart Component, complete the following steps:

  1. Place the Smart Component in a temporary directory.
  2. Double-click on the Smart Component.
  3. Follow the directions given by the Smart Component.
  4. For systems with a single supply, reboot your system if you would like the update to take effect immediately.

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Notes:

Deliverable Name:
HPE Power Supply Firmware

Release Version and/or Date: 
     2020.08.03

Last Recommended or Critical Version:
     2020.08.03

Previous Version of Firmware:
      1.04 (or earlier)

Firmware Dependency:
     None

Enhancements/New Features:
  None

Problems Fixed: 

Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware. Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.

Known Issues:
    None


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.

Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.

Version:2020.08.03 (4 Sep 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.

Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.


Version:2020.06.05 (12 Jun 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Version 1.05 firmware included in the 2020.06.05 update package resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.


Version:2018.06.21 (27 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Version 1.02 firmware included in the 2018.06.21 update package resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could reset or shut down under certain loading conditions when running version 1.01 (and earlier) power supply firmware.

Enhancements

None.


Type: Firmware - Power Management
Version: 2020.08.03(4 Sep 2020)
Operating System(s):
CentOS 7
CentOS 8
Debian GNU/Linux 10.0
Debian GNU/Linux 9.0
Oracle Linux 6 (AMD64/EMT64)
Oracle Linux 7
Red Hat Enterprise Linux 7 Server
Red Hat Enterprise Linux 8 Server
SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 15
Ubuntu 18.04

Description

This component provides updated power supply firmware that can be installed directly on supported Operating Systems.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

ec0fa54e912118dff653f223f7f4b49c0ff6f4e71ab3e931d3ee2d71ce8c4a96 RPMS/x86_64/firmware-powersupply-gen10powersupply-2020.08.03-1.1.x86_64.compsig
7cfe21e1003c148e29002f9e89107fa9d2bd76262ed603c4812311f0ef916f0d RPMS/x86_64/firmware-powersupply-gen10powersupply-2020.08.03-1.1.x86_64.rpm

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To install the Smart Component, complete the following steps:

  1. Place the Smart Component in a temporary directory.
  2. Double-click on the Smart Component.
  3. Follow the directions given by the Smart Component.
  4. For systems with a single supply, reboot your system if you would like the update to take effect immediately.

Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Notes:

Deliverable Name:
HPE Power Supply Firmware

Release Version and/or Date: 
     2020.08.03

Last Recommended or Critical Version:
     2020.08.03

Previous Version of Firmware:
      1.04 (or earlier)

Firmware Dependency:
     None

Enhancements/New Features:
  None

Problems Fixed: 

Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware. Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.

Known Issues:
    None


Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.

Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.

Revision History

Version:2020.08.03 (4 Sep 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Version 1.05 firmware resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could warn, reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.

Smart Component 2020.08.03 version resolves the pontential flash issue from v1.04 to 1.05 under certain conditions.


Version:2020.06.05 (12 Jun 2020)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Version 1.05 firmware included in the 2020.06.05 update package resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could reset or shut down under certain loading conditions when running version 1.04 (and earlier) power supply firmware.


Version:2018.06.21 (27 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Version 1.02 firmware included in the 2018.06.21 update package resolves a rare issue where some HPE ProLiant Gen10 server configurations with a specific HPE Platinum 800w power supply could reset or shut down under certain loading conditions when running version 1.01 (and earlier) power supply firmware.

Enhancements

None.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.