Printable version

Drivers & software

* RECOMMENDED * Online ROM Flash component for VMware ESXi - HPE Dual 8GB microSD USB

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - Storage Controller
Version: 1.3.2.19(1 Apr 2016)
Operating System(s): VMware vSphere 5.1
VMware vSphere 5.5
VMware vSphere 6.0
File name: CP027112.zip (336 KB)
This Smart Component provides firmware for the HPE Dual 8GB microSD Enterprise Midline USB

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • This is initial firmware release

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

98a9d6b336c18dc8169b24bf6421929968a475c72879cb3c85099870174d2c86 CP027112.zip

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    
Remote Online:

  • Download the appropriate SPP.
  • Add the component to the SPP.
  • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
  • Run HP SUM.
  • Add the ESXi host to be updated as a remote target/node.
  • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
  • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
  • Follow HP Smart Update Manager Steps and complete the firmware update.

Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
 
To use HP Insight Control for vCenter :

  • Log in to the vSphere Client.
  • Select a server or cluster in the inventory tree.
  • Click the HP Insight Management tab.
  • Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

  • Enable Tech Support Mode on the ESXi host
  • Login as root. (You must be root in order to apply the update)
  • Place the Smart Component zip file in a temporary directory
  • Unzip the file CPXXXXXX.zip
  • Ensure that CPXXXXXX.vmexe is executable by using the command:

             chmod +x CPXXXXXX.vmexe    

  • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe
  • Follow the directions given by the Smart Component
  • Logout
  • Disable Tech Support Mode on the ESXi host
  • Reboot your system, if required, for the firmware update to take effect

End User License Agreements:
Hewlett-Packard End User License Agreement
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Notes:

Deliverable Name:
     Online Smart Component which upgrades firmware on HPE Dual 8GB microSD Enterprise Midline USB 

Release Version and/or Date:
     1.3.2.19

Last Recommended or Critical Version:
     None

Previous Version of Firmware:
     None

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems fixed in version 1.3.2.19

     None

Known Issues: 
     None


Version:1.3.2.215(B) (2 Apr 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.

Version:1.3.2.215 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.

Version:1.3.2.212 (27 Jul 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Problems Fixed:

  • An HPE ProLiant Gen9 server upgraded to System ROM version 2.40_02-17-2017 will stop responding during Power-On Self-Test (POST) when performing a warm boot if the system is configured with HPE Dual 8GB microSD Enterprise Midline USB Kit (741279-B21) , which has controller firmware version FW 1.3.2.202. For additional information, refer to HPE Customer Advisory a00016609en_us
Enhancements

Enhancements/New Features:

  • Enables an HPE Dual 8GB microSD USB to report SD device errors that might occur after a warm boot of an HPE ProLiant Gen9 server that is configured with the device. Server system ROM version 2.40_02-17-2017 or later must be installed on the server to enable this new feature.

  • Improves reliability by updating power cycle logic to enhance Electro-static discharge tolerance.


Version:1.3.2.19 (1 Apr 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • This is initial firmware release

Type: Firmware - Storage Controller
Version: 1.3.2.19(1 Apr 2016)
Operating System(s):
VMware vSphere 5.1
VMware vSphere 5.5
VMware vSphere 6.0

Description

This Smart Component provides firmware for the HPE Dual 8GB microSD Enterprise Midline USB

Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • This is initial firmware release

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

98a9d6b336c18dc8169b24bf6421929968a475c72879cb3c85099870174d2c86 CP027112.zip

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

To use HP Smart Update Manager from the HP Service Pack for ProLiant:

    
Remote Online:

  • Download the appropriate SPP.
  • Add the component to the SPP.
  • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
  • Run HP SUM.
  • Add the ESXi host to be updated as a remote target/node.
  • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
  • For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
  • Follow HP Smart Update Manager Steps and complete the firmware update.

Refer to the SPP documentation for detailed instructions at: http://www.hp.com/go/spp
 
To use HP Insight Control for vCenter :

  • Log in to the vSphere Client.
  • Select a server or cluster in the inventory tree.
  • Click the HP Insight Management tab.
  • Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

  • Enable Tech Support Mode on the ESXi host
  • Login as root. (You must be root in order to apply the update)
  • Place the Smart Component zip file in a temporary directory
  • Unzip the file CPXXXXXX.zip
  • Ensure that CPXXXXXX.vmexe is executable by using the command:

             chmod +x CPXXXXXX.vmexe    

  • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe
  • Follow the directions given by the Smart Component
  • Logout
  • Disable Tech Support Mode on the ESXi host
  • Reboot your system, if required, for the firmware update to take effect

Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Notes:

Deliverable Name:
     Online Smart Component which upgrades firmware on HPE Dual 8GB microSD Enterprise Midline USB 

Release Version and/or Date:
     1.3.2.19

Last Recommended or Critical Version:
     None

Previous Version of Firmware:
     None

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems fixed in version 1.3.2.19

     None

Known Issues: 
     None


Revision History

Version:1.3.2.215(B) (2 Apr 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.

Version:1.3.2.215 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • To show corresponding HPE Dual 8GB Micron SD  part number in Agentless Management Service version 11.2.0 or later.

Version:1.3.2.212 (27 Jul 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Problems Fixed:

  • An HPE ProLiant Gen9 server upgraded to System ROM version 2.40_02-17-2017 will stop responding during Power-On Self-Test (POST) when performing a warm boot if the system is configured with HPE Dual 8GB microSD Enterprise Midline USB Kit (741279-B21) , which has controller firmware version FW 1.3.2.202. For additional information, refer to HPE Customer Advisory a00016609en_us
Enhancements

Enhancements/New Features:

  • Enables an HPE Dual 8GB microSD USB to report SD device errors that might occur after a warm boot of an HPE ProLiant Gen9 server that is configured with the device. Server system ROM version 2.40_02-17-2017 or later must be installed on the server to enable this new feature.

  • Improves reliability by updating power cycle logic to enhance Electro-static discharge tolerance.


Version:1.3.2.19 (1 Apr 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • This is initial firmware release

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.