Printable version

Drivers & software

* RECOMMENDED * HPE Power Protector - Windows

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Software - Management
Version: 2.02.087(6 Dec 2019)
Operating System(s): Microsoft Windows 10 (32-bit)
Microsoft Windows 10 (64-bit)
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 for Itanium-Based Systems
Microsoft Windows Server 2008 Small Business
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019
Microsoft Windows Storage Server 2012 R2
Microsoft Windows Storage Server 2016
OS Independent
File name: HPEPP_2.02.087_Windows.exe (6.3 MB)
HPE Power Protector (HPEPP) is an application that enables administrators to manage a HPE UPS from a browser-based management console. Administrators can monitor and manage a single UPS locally and remotely.Administrators may configure power failure settings and define UPS load segments for maximum uptime of critical servers and devices. HPE Power Protector is a single software application that can be configured as an Administrator or as a Client mode: HPE Power Protector Administrator monitors the UPS status and notifies clients of power related events. The server communicates directly with the UPS via a USB/Serial connection. HPE Power Protector Client is configured to communicate with HPE Power Protector-Administrator or HPE Network Module via network. It will gracefully shut down protected servers in the event of a power failure.

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

9955dfbec3aea5b0e0b7812f9fe61b519f32639bfee7988de96d994b8b4d54cd HPEPP_2.02.087_Windows.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

1.  Click the Download button to begin download operation for the zip file to a local drive.
2.  Extract contents of the zip file to a directory.
3.  Change to the directory to which the zip file contents were extracted and run the executable to unpack the software.
4.  Refer to the installation instruction in the README.pdf file.
5.  Additional information is available in the user guide: http://www.hpe.com/support/PowerProtector_Manuals

To verify the integrity of the downloaded file, do the following steps:

  • Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for <filename>.
  • Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
    • If the values match, then the integrity of the downloaded file has been verified.
    • If the values do not match, do not deploy the file.
    • Download the file a second time and compare the newly calculated hash values again. If the hash values do not match:
      • Do not deploy the file
      • Contact HPE Technical Support

To verify the authenticity of the downloaded file, do the following steps:

  1. Download HPEPP_2.02.087_Windows.zip to a system running a supported version of Microsoft Windows Server OS
  2.  Right-click the filename then select Properties
  3. When the Properties window displays, click the Digital Signature tab
  4. Select the first entry in the Signature List and click the Details button.
  5. The signature status will display at the top of the Details dialog.
    • If the signature message states that “This digital signature is OK.”, then the package is authenticated as an HPE package
    • If the message “This digital signature is not OK.” displays, then do the following:
      • Do not deploy the file.
      • Download file a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

=========================================================================
Supported UPSs
=========================================================================
HPE Power Protector (HPEPP) is supported on the following UPS's:
( HPEPP is installed in either Administrator or Client mode):

T750J
T750 G4
T750 G5
T1000 G5
T1000J
T1000 G4
T1500 G5
T1500J
T1500 G4
R1500 G5
R1500 G4
RT2200 G4
RT2200 G5
RT3000 G4
RT3000 G5

R5000 G2 (Ships with HPE Single Phase 1 Gb Network Module)
R6000 G2 (Ships with HPE Single Phase 1 Gb Network Module)
R8000 G2 (Ships with HPE Single Phase 1 Gb Network Module)

R5000 (Ships with HPE Network Module)
R7000 (Ships with HPE Network Module)

 


Notes:

Supported OS for HPEPP Admin & HPEPP Client :

Microsoft Windows :

  • Windows Server 2019        Standard, DataCenter
  • Windows Server 2016        Standard, DataCenter, Storage
  • Windows Server 2012 R2   Standard, DataCenter, Storage
  • Windows Server 2008 R2   Standard, DataCenter
  • Windows 10                      Professional, Enterprise

Red Hat  Enterprise Linux :

  • Red Hat Enterprise Linux 8.0
  • Red Hat Enterprise Linux 7.6
  • Red Hat Enterprise Linux 7.4
  • Red Hat Enterprise Linux 6.7
  • Red Hat Enterprise Linux 6.6

SUSE/Novell:

  • SUSE Linux Enterprise Server 15 SP1
  • SuSE Linux Enterprise Server 12 SP4
  • SuSE Linux Enterprise Server 12 SP3

The following Operating systems are supported in client mode only:
HP-UX  :

  • HP-UX 11i v3  (HPEPP Client only)

VMware (pay version only)  : 

  • ESXi 6.7  (HPEPP Client only) (pay version only)
  • ESXi 6.5  (HPEPP Client only)  (pay version only) 

Microsoft HyperV  :

  • Windows Hyper-V Server 2019 (HPEPP Client only)
  • Windows Hyper-V Server 2016 (HPEPP Client only)
  • Windows Hyper-V Server 2012 R2 (HPEPP Client only)

=========================================================================

Supported Browsers:

  • Internet Explorer 11
  • Microsoft Edge 40
  • Windows Mozilla Firefox 69.0.1(windows operating system only)
  • Chrome 77.0.3865.120

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


• Japanese Translation fixes
• R1500 G4 UPS loses communication when HPE Gen10 server is rebooted
• USB connection method not working for RHEL v7.4
• HPEPP install fails on SUSE 12.x and HPE Gen10 servers.
• Update ShutdownTimer field to allow 5 digit
• Quick Scan is not working as expected under Linux environment.
• HPEPP for Gen10 Service not running with SLES SP4

=========================================================================
Supported UPSs
=========================================================================
HPE Power Protector (HPEPP) is supported on the following UPS's:
( HPEPP is installed in either Administrator or Client mode):

T750J
T750 G4
T750 G5
T1000 G5
T1000J
T1000 G4
T1500 G5
T1500J
T1500 G4
R1500 G5
R1500 G4
RT2200 G4
RT2200 G5
RT3000 G4
RT3000 G5

R5000 G2 (Ships with HPE Single Phase 1 Gb Network Module)
R6000 G2 (Ships with HPE Single Phase 1 Gb Network Module)
R8000 G2 (Ships with HPE Single Phase 1 Gb Network Module)

R5000 (Ships with HPE Network Module)
R7000 (Ships with HPE Network Module)

 

Version:2.02.087 (6 Dec 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


• Japanese Translation fixes
• R1500 G4 UPS loses communication when HPE Gen10 server is rebooted
• USB connection method not working for RHEL v7.4
• HPEPP install fails on SUSE 12.x and HPE Gen10 servers.
• Update ShutdownTimer field to allow 5 digit
• Quick Scan is not working as expected under Linux environment.
• HPEPP for Gen10 Service not running with SLES SP4


Version:2.02.081 (16 Aug 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • FW version of network card is now displayed in HPEPP (compatible since FW version 1.6)
  • STARTTLS protocol is now compatible with HPEPP
  • Japanese Translation fixes
  • R1500 G4 UPS loses communication when HPE Gen10 server is rebooted
  • Update ShutdownTimer field to allow 5 digit

Cybersecurity

  • Unprotected Windows service executable path
  • CVE-2014-3566 - POODLE (SSLv3)
  • Undisclosed various IPP/IPM path traversal
  • Password disclosure in debug logs
     
Enhancements

Implemented https protocol for all HPEPP connections to improve security


Version:2.02.078 (26 Mar 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

• HPEPP is compatible with New UPSs  
• HPEPP is compatible with the latest FW 1.4.5 of HPE Single Phase 1Gb UPS Ntwrk Mgmt Mod Card
• Path traversal vulnerability fixed (CVE-2018-12031) 


Version:2.01.077 (18 Jan 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

The following GUI changes are implemented in HPEPP version 2.01.077:

  • On Shutdown parameter page, the "Load segment" label now displays as "Group of outlet".
  • UPS Configuration area and link now displays in Shutdown Parameters.
  • Revised Japanese translations are now available for multiple pages.

 

Enhancements

REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.


 HP-UX operating system support for Q1C17A network card is added 


Version:2.00.073 (30 May 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

* Missing images on Help page.
* Date, Time, Temperature format not saved on system page.
* Circuit diagram in HPEPP show flow disrupted (Grey color) under powerscope page.

Enhancements

REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

NOTE:

  • Q1C17A : Its part number for Product "HPE Single Phase 1Gb UPS Ntwrk Mgmt Mod".
  • AF465A : Its part number for Product "HPE UPS Network Module".

---------------------------------------------------------------------------------------------------------------------------------------

* Updated GUI
* Q1C17A compatibility.
* AF465A compatibility.
* Remove Q1C17A card discovery from the HP-UX build.
* Certificate Management for pairing HPEPP and Q1C17A card.
* Automatic discovery of all Q1C17A instances connected.
* Security updates SHA2 - 1024-2048 encryption.


Version:1.06.069 (16 Mar 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

  • Re-integrate virtual_tool for ESXi.
  • Fixed the missing images on Help page.
  • Date, Time, Temperature format not saved on system page.
  • Circuit diagram in HPEPP show flow distruption.
  • Shutdown intiated after (value 300s).
Enhancements

REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

  • Updated GUI to Grommet style.
  • Added SHA2 - 1024-2048 encryption support.

Version:1.05.058 (13 Feb 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

The following issues were resolved in version 1.05.058:

  • Fix for SSL socket which enables more TLS protocol compatibility.
  • Language value is displayed as undefined by default in the System page.
  • Unable to see the power source information when editing node information more than 100 chararcters.
Enhancements

REMOVED - This software version is no longer available for download from HPE due to a change in support policy. See notes on 'Important' tab for additional information.

The following enhancement was implemented in version 1.05.058:

  • HPE Rebranding added.

Version:1.04.053 (23 Aug 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

Following Fixes were Included in this release:

  1. HPPP does not display "Resting" status for some UPS.
  2. Help page is empty in HPPP.
  3. The automatic scan system setting is not saved.
  4. Erroneous load segment information shown when Japanese language is selected in HPPP.
  5. Removing unwanted automatic scan GUI features.
  6. Watchdog Restart.

Version:1.04.049 (18 Apr 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

  • Corrects constant "0" value in Input Average field
  • Corrects hidden Input Current field

Version:1.04.046 (8 Mar 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in support policy. See notes on 'Important' tab for additional information

The following issues were resolved in version 1.04.046:

  • Restart of the server fails after 60 schedule shutdown events

  • Serial Communication failure is observed in HP Power Protector software at 60th schedule shutdown event

  • Communication lost with UPS via USB Modifications in the driver (UPS naming pattern) and USB drivers re-generated

  • SLES11 SP1 IA64: No UPS is discovered in USB mode

  • Blank page in shutdown menu after changing shutdown criteria

  • Power scope Panel - Charger module is not displayed correctly

  • Corrects HP UPS classification from "Line Adaptive" to "Line Interactive" in the power scope panel

  • HPPP Client mode: The UPS alarms detection with HP Power Protector software takes too long. Alarm reception buffer added in alarm definition screen


Version:1.03.041 (27 Apr 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

The following issues were resolved in version 1.03.041:

  • Install and Uninstall issues for HP-UX and Redhat systems
  • HP T1500 UPS image corrected on status page
  • HP R1500 G4 UPS load segment restart delay issue
  • Missing Japanese translation issues

Version:1.03.38  (10 Feb 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in support policy. See notes on 'Important' tab for additional information

The following issues were resolved in version 1.03.038:

  • HPPP on Administrator Mode, behavior not expected: Some Network Devices are available on the Node List after running HPPP for some time
  • The process watch dog does not restart after a reboot of a v11.31 HP-UX server

Version:1.02.031 (28 Mar 2014)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

The following issues were resolved in version 1.02.031:

  • Fixed Japanese language translation issues
  • Fixed the scheduled restart time delays on HP R1500 G3, HP T1000, and HP T750 UPS models.  Note:  The HP T1500 G3 may still experience a two minute delay
  • Corrected Power Scope Display from “Line Interactive UPS” to “Line Adaptive UPS”

Version:1.02.028 (20 Nov 2013)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information

The following issues were resolved in version 1.02.028:

  • Blank notification pop-up issue
  • Scheduling module issue that required a HP Power Protector reinstallation
  • Users were unable to delete HPPP Scheduled Shutdown entry

Version:1.02.026 (6 Nov 2012)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information

The following enhancement was implemented in version 1.02.026:

  • Scheduled Shutdowns:  HPPP administrators can schedule one time, daily, and weekly scheduled shutdowns.
  • Automatically set the HPPP Administrator Shutdown Initiated After time to the longest value of all connected clients.
  • A new advanced shutdown criteria option "Communication Failure" has been added to allow users to control if shutdowns occur when a communication failure occurs.
  • The shutdown initiated after value is automatically set to a default value of "None" when a redundant configuration is selected.

Version:1.01.016 (20 Jun 2011)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

Initial Release


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information. 

The following enhancement was implemented in version 1.01.016:

Features and Benefits:

  • Reliable power backup and graceful system shut down in the event of a power failure
  • Monitor, manage, and communicate with a UPS through a USB port, serial port, or an installed HP UPS Network Module
  • Perform scheduled graceful shut downs of attached equipment when used with the HP UPS Network Module
  • Notify admin personnel in the event of a power failure
  • Easy-to-use browser interface

Type: Software - Management
Version: 2.02.087(6 Dec 2019)
Operating System(s):
Microsoft Windows 10 (32-bit)
Microsoft Windows 10 (64-bit)
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 for Itanium-Based Systems
Microsoft Windows Server 2008 Small Business
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019
Microsoft Windows Storage Server 2012 R2
Microsoft Windows Storage Server 2016
OS Independent

Description

HPE Power Protector (HPEPP) is an application that enables administrators to manage a HPE UPS from a browser-based management console. Administrators can monitor and manage a single UPS locally and remotely.Administrators may configure power failure settings and define UPS load segments for maximum uptime of critical servers and devices. HPE Power Protector is a single software application that can be configured as an Administrator or as a Client mode: HPE Power Protector Administrator monitors the UPS status and notifies clients of power related events. The server communicates directly with the UPS via a USB/Serial connection. HPE Power Protector Client is configured to communicate with HPE Power Protector-Administrator or HPE Network Module via network. It will gracefully shut down protected servers in the event of a power failure.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

9955dfbec3aea5b0e0b7812f9fe61b519f32639bfee7988de96d994b8b4d54cd HPEPP_2.02.087_Windows.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

1.  Click the Download button to begin download operation for the zip file to a local drive.
2.  Extract contents of the zip file to a directory.
3.  Change to the directory to which the zip file contents were extracted and run the executable to unpack the software.
4.  Refer to the installation instruction in the README.pdf file.
5.  Additional information is available in the user guide: http://www.hpe.com/support/PowerProtector_Manuals

To verify the integrity of the downloaded file, do the following steps:

  • Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for <filename>.
  • Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
    • If the values match, then the integrity of the downloaded file has been verified.
    • If the values do not match, do not deploy the file.
    • Download the file a second time and compare the newly calculated hash values again. If the hash values do not match:
      • Do not deploy the file
      • Contact HPE Technical Support

To verify the authenticity of the downloaded file, do the following steps:

  1. Download HPEPP_2.02.087_Windows.zip to a system running a supported version of Microsoft Windows Server OS
  2.  Right-click the filename then select Properties
  3. When the Properties window displays, click the Digital Signature tab
  4. Select the first entry in the Signature List and click the Details button.
  5. The signature status will display at the top of the Details dialog.
    • If the signature message states that “This digital signature is OK.”, then the package is authenticated as an HPE package
    • If the message “This digital signature is not OK.” displays, then do the following:
      • Do not deploy the file.
      • Download file a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.

Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

=========================================================================
Supported UPSs
=========================================================================
HPE Power Protector (HPEPP) is supported on the following UPS's:
( HPEPP is installed in either Administrator or Client mode):

T750J
T750 G4
T750 G5
T1000 G5
T1000J
T1000 G4
T1500 G5
T1500J
T1500 G4
R1500 G5
R1500 G4
RT2200 G4
RT2200 G5
RT3000 G4
RT3000 G5

R5000 G2 (Ships with HPE Single Phase 1 Gb Network Module)
R6000 G2 (Ships with HPE Single Phase 1 Gb Network Module)
R8000 G2 (Ships with HPE Single Phase 1 Gb Network Module)

R5000 (Ships with HPE Network Module)
R7000 (Ships with HPE Network Module)

 


Notes:

Supported OS for HPEPP Admin & HPEPP Client :

Microsoft Windows :

  • Windows Server 2019        Standard, DataCenter
  • Windows Server 2016        Standard, DataCenter, Storage
  • Windows Server 2012 R2   Standard, DataCenter, Storage
  • Windows Server 2008 R2   Standard, DataCenter
  • Windows 10                      Professional, Enterprise

Red Hat  Enterprise Linux :

  • Red Hat Enterprise Linux 8.0
  • Red Hat Enterprise Linux 7.6
  • Red Hat Enterprise Linux 7.4
  • Red Hat Enterprise Linux 6.7
  • Red Hat Enterprise Linux 6.6

SUSE/Novell:

  • SUSE Linux Enterprise Server 15 SP1
  • SuSE Linux Enterprise Server 12 SP4
  • SuSE Linux Enterprise Server 12 SP3

The following Operating systems are supported in client mode only:
HP-UX  :

  • HP-UX 11i v3  (HPEPP Client only)

VMware (pay version only)  : 

  • ESXi 6.7  (HPEPP Client only) (pay version only)
  • ESXi 6.5  (HPEPP Client only)  (pay version only) 

Microsoft HyperV  :

  • Windows Hyper-V Server 2019 (HPEPP Client only)
  • Windows Hyper-V Server 2016 (HPEPP Client only)
  • Windows Hyper-V Server 2012 R2 (HPEPP Client only)

=========================================================================

Supported Browsers:

  • Internet Explorer 11
  • Microsoft Edge 40
  • Windows Mozilla Firefox 69.0.1(windows operating system only)
  • Chrome 77.0.3865.120

Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


• Japanese Translation fixes
• R1500 G4 UPS loses communication when HPE Gen10 server is rebooted
• USB connection method not working for RHEL v7.4
• HPEPP install fails on SUSE 12.x and HPE Gen10 servers.
• Update ShutdownTimer field to allow 5 digit
• Quick Scan is not working as expected under Linux environment.
• HPEPP for Gen10 Service not running with SLES SP4

Important

=========================================================================
Supported UPSs
=========================================================================
HPE Power Protector (HPEPP) is supported on the following UPS's:
( HPEPP is installed in either Administrator or Client mode):

T750J
T750 G4
T750 G5
T1000 G5
T1000J
T1000 G4
T1500 G5
T1500J
T1500 G4
R1500 G5
R1500 G4
RT2200 G4
RT2200 G5
RT3000 G4
RT3000 G5

R5000 G2 (Ships with HPE Single Phase 1 Gb Network Module)
R6000 G2 (Ships with HPE Single Phase 1 Gb Network Module)
R8000 G2 (Ships with HPE Single Phase 1 Gb Network Module)

R5000 (Ships with HPE Network Module)
R7000 (Ships with HPE Network Module)

 

Revision History

Version:2.02.087 (6 Dec 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


• Japanese Translation fixes
• R1500 G4 UPS loses communication when HPE Gen10 server is rebooted
• USB connection method not working for RHEL v7.4
• HPEPP install fails on SUSE 12.x and HPE Gen10 servers.
• Update ShutdownTimer field to allow 5 digit
• Quick Scan is not working as expected under Linux environment.
• HPEPP for Gen10 Service not running with SLES SP4


Version:2.02.081 (16 Aug 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • FW version of network card is now displayed in HPEPP (compatible since FW version 1.6)
  • STARTTLS protocol is now compatible with HPEPP
  • Japanese Translation fixes
  • R1500 G4 UPS loses communication when HPE Gen10 server is rebooted
  • Update ShutdownTimer field to allow 5 digit

Cybersecurity

  • Unprotected Windows service executable path
  • CVE-2014-3566 - POODLE (SSLv3)
  • Undisclosed various IPP/IPM path traversal
  • Password disclosure in debug logs
     
Enhancements

Implemented https protocol for all HPEPP connections to improve security


Version:2.02.078 (26 Mar 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

• HPEPP is compatible with New UPSs  
• HPEPP is compatible with the latest FW 1.4.5 of HPE Single Phase 1Gb UPS Ntwrk Mgmt Mod Card
• Path traversal vulnerability fixed (CVE-2018-12031) 


Version:2.01.077 (18 Jan 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

The following GUI changes are implemented in HPEPP version 2.01.077:

  • On Shutdown parameter page, the "Load segment" label now displays as "Group of outlet".
  • UPS Configuration area and link now displays in Shutdown Parameters.
  • Revised Japanese translations are now available for multiple pages.

 

Enhancements

REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.


 HP-UX operating system support for Q1C17A network card is added 


Version:2.00.073 (30 May 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

* Missing images on Help page.
* Date, Time, Temperature format not saved on system page.
* Circuit diagram in HPEPP show flow disrupted (Grey color) under powerscope page.

Enhancements

REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

NOTE:

  • Q1C17A : Its part number for Product "HPE Single Phase 1Gb UPS Ntwrk Mgmt Mod".
  • AF465A : Its part number for Product "HPE UPS Network Module".

---------------------------------------------------------------------------------------------------------------------------------------

* Updated GUI
* Q1C17A compatibility.
* AF465A compatibility.
* Remove Q1C17A card discovery from the HP-UX build.
* Certificate Management for pairing HPEPP and Q1C17A card.
* Automatic discovery of all Q1C17A instances connected.
* Security updates SHA2 - 1024-2048 encryption.


Version:1.06.069 (16 Mar 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

  • Re-integrate virtual_tool for ESXi.
  • Fixed the missing images on Help page.
  • Date, Time, Temperature format not saved on system page.
  • Circuit diagram in HPEPP show flow distruption.
  • Shutdown intiated after (value 300s).
Enhancements

REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

  • Updated GUI to Grommet style.
  • Added SHA2 - 1024-2048 encryption support.

Version:1.05.058 (13 Feb 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

The following issues were resolved in version 1.05.058:

  • Fix for SSL socket which enables more TLS protocol compatibility.
  • Language value is displayed as undefined by default in the System page.
  • Unable to see the power source information when editing node information more than 100 chararcters.
Enhancements

REMOVED - This software version is no longer available for download from HPE due to a change in support policy. See notes on 'Important' tab for additional information.

The following enhancement was implemented in version 1.05.058:

  • HPE Rebranding added.

Version:1.04.053 (23 Aug 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

Following Fixes were Included in this release:

  1. HPPP does not display "Resting" status for some UPS.
  2. Help page is empty in HPPP.
  3. The automatic scan system setting is not saved.
  4. Erroneous load segment information shown when Japanese language is selected in HPPP.
  5. Removing unwanted automatic scan GUI features.
  6. Watchdog Restart.

Version:1.04.049 (18 Apr 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

  • Corrects constant "0" value in Input Average field
  • Corrects hidden Input Current field

Version:1.04.046 (8 Mar 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in support policy. See notes on 'Important' tab for additional information

The following issues were resolved in version 1.04.046:

  • Restart of the server fails after 60 schedule shutdown events

  • Serial Communication failure is observed in HP Power Protector software at 60th schedule shutdown event

  • Communication lost with UPS via USB Modifications in the driver (UPS naming pattern) and USB drivers re-generated

  • SLES11 SP1 IA64: No UPS is discovered in USB mode

  • Blank page in shutdown menu after changing shutdown criteria

  • Power scope Panel - Charger module is not displayed correctly

  • Corrects HP UPS classification from "Line Adaptive" to "Line Interactive" in the power scope panel

  • HPPP Client mode: The UPS alarms detection with HP Power Protector software takes too long. Alarm reception buffer added in alarm definition screen


Version:1.03.041 (27 Apr 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

The following issues were resolved in version 1.03.041:

  • Install and Uninstall issues for HP-UX and Redhat systems
  • HP T1500 UPS image corrected on status page
  • HP R1500 G4 UPS load segment restart delay issue
  • Missing Japanese translation issues

Version:1.03.38  (10 Feb 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in support policy. See notes on 'Important' tab for additional information

The following issues were resolved in version 1.03.038:

  • HPPP on Administrator Mode, behavior not expected: Some Network Devices are available on the Node List after running HPPP for some time
  • The process watch dog does not restart after a reboot of a v11.31 HP-UX server

Version:1.02.031 (28 Mar 2014)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

The following issues were resolved in version 1.02.031:

  • Fixed Japanese language translation issues
  • Fixed the scheduled restart time delays on HP R1500 G3, HP T1000, and HP T750 UPS models.  Note:  The HP T1500 G3 may still experience a two minute delay
  • Corrected Power Scope Display from “Line Interactive UPS” to “Line Adaptive UPS”

Version:1.02.028 (20 Nov 2013)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information

The following issues were resolved in version 1.02.028:

  • Blank notification pop-up issue
  • Scheduling module issue that required a HP Power Protector reinstallation
  • Users were unable to delete HPPP Scheduled Shutdown entry

Version:1.02.026 (6 Nov 2012)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information

The following enhancement was implemented in version 1.02.026:

  • Scheduled Shutdowns:  HPPP administrators can schedule one time, daily, and weekly scheduled shutdowns.
  • Automatically set the HPPP Administrator Shutdown Initiated After time to the longest value of all connected clients.
  • A new advanced shutdown criteria option "Communication Failure" has been added to allow users to control if shutdowns occur when a communication failure occurs.
  • The shutdown initiated after value is automatically set to a default value of "None" when a redundant configuration is selected.

Version:1.01.016 (20 Jun 2011)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information.

Initial Release


REMOVED - This software version is no longer available for download from HPE due to a change in HPE support policy. See notes on 'Important' tab for additional information. 

The following enhancement was implemented in version 1.01.016:

Features and Benefits:

  • Reliable power backup and graceful system shut down in the event of a power failure
  • Monitor, manage, and communicate with a UPS through a USB port, serial port, or an installed HP UPS Network Module
  • Perform scheduled graceful shut downs of attached equipment when used with the HP UPS Network Module
  • Notify admin personnel in the event of a power failure
  • Easy-to-use browser interface

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.