Printable version

Drivers & software

** CRITICAL ** Online ROM Flash Component for Linux - HP ProLiant ML10 v2 (J10) Servers

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: BIOS (Entitlement Required) - System ROM
Version: 2018.05.21(25 Jun 2018)
Operating System(s): Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 12
File name: firmware-system-j10-2018.05.21-1.1.i386.rpm (1.9 MB)
This component provides updated system firmware that can be installed directly on supported Operating Systems. Additionally, when used in conjunction with Smart Update Manager (SUM), this Component allows the user to update firmware on remote servers from a central location. This remote deployment capability eliminates the need for the user to be physically present at the server in order to perform a firmware update.

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

ccf2fbc4cab9c250ccadc51c14fe6cbeb41991d670cce29a2a8870a771c2ff17 RPMS/i386/firmware-system-j10-2018.05.21-1.1.i386.rpm

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:
 
Install the RPM package
> rpm -Uvh <filename>.rpm
 
See where the files land
> rpm -qlp <filename>.rpm
 
Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.


Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
  • Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

 


End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important:

Important Notes:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Deliverable Name:

HP ProLiant ML10 v2 System ROM - J10

Release Version:

05/21/2018

Last Recommended or Critical Revision:

05/21/2018

Previous Revision:

01/22/2018

Firmware Dependencies:

None

Enhancements/New Features:

None

Problems Fixed:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Known Issues:

None


Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Firmware Dependencies:

None

Problems Fixed:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Known Issues:

None

Important Notes:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Deliverable Name:

HP ProLiant ML10 v2 System ROM - J10

Release Version:

05/21/2018

Last Recommended or Critical Revision:

05/21/2018

Previous Revision:

01/22/2018

Firmware Dependencies:

None

Enhancements/New Features:

None

Problems Fixed:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Known Issues:

None

Version:2018.05.21 (25 Jun 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Firmware Dependencies:

None

Problems Fixed:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Known Issues:

None


Version:2018.01.22 (23 Feb 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for Variant 2 of the Side Channel Analysis vulnerability, also known as Spectre. The revision of the microcode included in this System ROM addresses issues with more frequent reboots and unpredictable system behavior which impacted the previous Intel microcode which was part of the Spectre Variant 2 mitigation. Additional information is available from Intel’s Security Exploit Newsroom, https://newsroom.intel.com/press-kits/security-exploits-intel-products/.

Firmware Dependencies:

None

Problems Fixed:

Updated the Intel processor microcode to the latest version.

Known Issues:

None


Version:2017.12.12 (5 Jan 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

REMOVED - This version of the System ROM is NO LONGER AVAILABLE for download.

On January 11, Intel announced issues with an increased frequency of reboots when using the microcodes they released to address Variant 2 of the Spectre Vulnerability for numerous processors including Broadwell, Haswell, Skylake, Kaby Lake, Ivybridge, and Sandybridge processors. Mitigations for Variant 1 (Spectre) and Variant 3 (Meltdown) vulnerabilities require only OS updates and are not impacted.

Due to the severity of the potential issues that may occur when using these microcodes addressing Variant 2, Intel now recommends that customers discontinue their use.  Additional information is available from Intel’s Security Exploit Newsroom, https://newsroom.intel.com/press-kits/security-exploits-intel-products/.  HPE is in alignment with Intel in our recommendation that customers discontinue use of System ROMs including impacted microcodes and revert to earlier System ROM versions. Earlier versions of the System ROMs display on the ‘Revision History’ tab. Clicking the ‘Obtain software’ link opens the HPE Customer Advisory on this topic where the recommended version of an earlier System ROM for each affected platform is provided along with additional information about this critical issue.

Firmware Dependencies:

None

Problems Fixed:

Updated the Intel processor microcode to the latest version.

Known Issues:

None


Version:2015.02.02 (B) (15 Jun 2015)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important Notes:

Version 2015.02.02 (B) contains an update to the flash driver and replaces version 2015.02.02. The actual firmware contained within version 2015.02.02 (B) did not change as compared to version 2015.02.02 and therefore it is not necessary to upgrade if version 2015.02.02 has already been installed.

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial version of the firmware.

Known Issues:

None


Type: BIOS (Entitlement Required) - System ROM
Version: 2018.05.21(25 Jun 2018)
Operating System(s):
Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 12

Description

This component provides updated system firmware that can be installed directly on supported Operating Systems. Additionally, when used in conjunction with Smart Update Manager (SUM), this Component allows the user to update firmware on remote servers from a central location. This remote deployment capability eliminates the need for the user to be physically present at the server in order to perform a firmware update.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

ccf2fbc4cab9c250ccadc51c14fe6cbeb41991d670cce29a2a8870a771c2ff17 RPMS/i386/firmware-system-j10-2018.05.21-1.1.i386.rpm

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

IMPORTANT: This component will fail if it is unable to communicate with iLO.  This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running.  HP does not recommend running AMS and the SNMP Agents at the same time.  If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:
 
Install the RPM package
> rpm -Uvh <filename>.rpm
 
See where the files land
> rpm -qlp <filename>.rpm
 
Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.


Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
  • Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

 


Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important:

Important Notes:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Deliverable Name:

HP ProLiant ML10 v2 System ROM - J10

Release Version:

05/21/2018

Last Recommended or Critical Revision:

05/21/2018

Previous Revision:

01/22/2018

Firmware Dependencies:

None

Enhancements/New Features:

None

Problems Fixed:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Known Issues:

None


Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Firmware Dependencies:

None

Problems Fixed:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Known Issues:

None

Important

Important Notes:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Deliverable Name:

HP ProLiant ML10 v2 System ROM - J10

Release Version:

05/21/2018

Last Recommended or Critical Revision:

05/21/2018

Previous Revision:

01/22/2018

Firmware Dependencies:

None

Enhancements/New Features:

None

Problems Fixed:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Known Issues:

None

Revision History

Version:2018.05.21 (25 Jun 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Firmware Dependencies:

None

Problems Fixed:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for the Speculative Store Bypass (also known as Variant 4) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3639. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for the Rogue Register Read (also known as Variant 3a) security vulnerability. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Systems with microprocessors utilizing speculative execution and that perform speculative reads of system registers may allow unauthorized disclosure of system parameters to an attacker with local user access via a side-channel analysis. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors.

Known Issues:

None


Version:2018.01.22 (23 Feb 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for Variant 2 of the Side Channel Analysis vulnerability, also known as Spectre. The revision of the microcode included in this System ROM addresses issues with more frequent reboots and unpredictable system behavior which impacted the previous Intel microcode which was part of the Spectre Variant 2 mitigation. Additional information is available from Intel’s Security Exploit Newsroom, https://newsroom.intel.com/press-kits/security-exploits-intel-products/.

Firmware Dependencies:

None

Problems Fixed:

Updated the Intel processor microcode to the latest version.

Known Issues:

None


Version:2017.12.12 (5 Jan 2018)
Fixes

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


Important Notes:

REMOVED - This version of the System ROM is NO LONGER AVAILABLE for download.

On January 11, Intel announced issues with an increased frequency of reboots when using the microcodes they released to address Variant 2 of the Spectre Vulnerability for numerous processors including Broadwell, Haswell, Skylake, Kaby Lake, Ivybridge, and Sandybridge processors. Mitigations for Variant 1 (Spectre) and Variant 3 (Meltdown) vulnerabilities require only OS updates and are not impacted.

Due to the severity of the potential issues that may occur when using these microcodes addressing Variant 2, Intel now recommends that customers discontinue their use.  Additional information is available from Intel’s Security Exploit Newsroom, https://newsroom.intel.com/press-kits/security-exploits-intel-products/.  HPE is in alignment with Intel in our recommendation that customers discontinue use of System ROMs including impacted microcodes and revert to earlier System ROM versions. Earlier versions of the System ROMs display on the ‘Revision History’ tab. Clicking the ‘Obtain software’ link opens the HPE Customer Advisory on this topic where the recommended version of an earlier System ROM for each affected platform is provided along with additional information about this critical issue.

Firmware Dependencies:

None

Problems Fixed:

Updated the Intel processor microcode to the latest version.

Known Issues:

None


Version:2015.02.02 (B) (15 Jun 2015)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important Notes:

Version 2015.02.02 (B) contains an update to the flash driver and replaces version 2015.02.02. The actual firmware contained within version 2015.02.02 (B) did not change as compared to version 2015.02.02 and therefore it is not necessary to upgrade if version 2015.02.02 has already been installed.

Firmware Dependencies:

None

Enhancements/New Features:

This is the initial version of the firmware.

Known Issues:

None


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.