Printable version

Drivers & software

HP Lights-Out XML PERL Scripting Sample for Linux

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Software - Lights-Out Management
Version: 4.50.0(30 Mar 2015)
Operating System(s): Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
Red Hat Enterprise Linux 6 Server (x86)
Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (x86)
SUSE Linux Enterprise Server 12
VMware ESX/ESXi 4.0
VMware ESX/ESXi 4.1
VMware ESXi 5.0
File name: linux-LOsamplescripts4.50.0.tgz (59 KB)
This is a set of sample XML scripts used to manage the configuration of Integrated Lights-Out (iLO) management processors and to control servers in which iLO devices are in use. Use LOCFG.PL (available in this bundle) to run the XML.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


- Introduced SNP_PORT tag in Shared_Network_Port.xml
- Added DHCPV6_DOMAIN_NAME and ILO_NIC_AUTO_SELECT tags in Mod_Network_Settings.xml
- SSL_V3_ENABLE tag for iLO2 Management Processor is included in MOD_GLOBAL_SETTINGS.xml
- Result of script execution gets printed at the end of each run in LOCFG.PL
- 2 new scripts added - Get_SDCard_Status.xml and Send_Snmp_Test_Trap.xml

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

b78a03fbce52d3f0e696a68bdf206828facbdaf7fa19a6d1517ee1bdd6cabedd linux-LOsamplescripts4.50.0.tgz

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:
Unzip/Untar linux-LOsamplescripts4.50.0.tgz to a subdirectory. This file contains the following scripts:

  • Add_Federation_Group.xml – Add an iLO Federation Management group membership and grant associated privileges.
  • Add_SSO_Rec.xml - Add an HP SIM Single Sign-On (SSO) record to the end of the database.
  • Add_User.xml - Add a user to the Lights-Out device user database.
  • Administrator_reset_pw.xml - Reset the default administrator account password using HPONCFG.
  • Cert_Request.xml - Request a Certificate Signing Request from Lights-Out device.
  • Change_Password.xml - Change the password of an existing Light-Out device user.
  • Clear_AHS_Data.xml - This is a sample XML script to clear AHS data.
  • Clear_EventLog.xml - Clear the Light-Out device Event Log.
  • Clear_IML.xml - Clear the server Integrated Management Log (IML).
  • Clear_Power_On_Time.xml
  • Computer_Lock_Config.xml - Change the values for Computer Lock settings.
  • Delete_Federation_Group.xml – Delete an iLO Federation Management group membership.
  • Delete_SSH_Key.xml - deletes existing SSH key.
  • Delete_SSO_Rec.xml - Delete an HP SIM Single Sign-On (SSO) record by index.
  • Delete_User.xml - Delete a user from the Light-Out device user database.
  • Eject_Virtual_Media.xml - Ejects the image of the specified Virtual Media device.
  • ERS_DC_CompleteRegistration.xml - Complete step 2 in the Insight Remote Support Direct Connect registration process.
  • ERS_DC_RegisterDevice.xml - Complete step 1 in the Insight Remote Support Direct Connect Registration process.
  • Factory_Defaults.xml - Set the Lights-Out device to factory default settings.
  • Get_2Factor.xml - Obtain the two factor authentication configuration settings.
  • Get_AHS_Status.xml - This is a sample XML script to find out if AHS is enabled or disabled.
  • Get_All_Languages.xml - This is a sample XML script to read all languages that are supported on iLO.
  • Get_All_Licenses.xml - This is a sample XML script to get the license information.
  • Get_All_User_Info.xml - Return the configuration details for all users.
  • Get_All_Users.xml - Return a list of all user accounts on Lights-Out device.
  • Get_Boot_Mode.xml – Get the server’s pending boot mode.
  • Get_Cert_Subject.xml - Retrieve iLO2 certificate subject information.
  • Get_Current_Boot_Mode.xml – Get the server’s current boot mode.
  • Get_Diagport.xml - Return BL p-class diagport settings.
  • Get_Directory.xml - Return the current directory configuration of an Lights-Out device.
  • Get_Embedded_Health.xml - Return the current embedded health status.
  • Get_EmHealth.xml - Return the health information of the server.
  • Get_Enc_Bay_IP_Settings.xml - Obtain static IP settings of individual blades in the respective enclosure.
  • Get_Federation_All_Groups.xml – View the iLO Federation Management group memberships for a server
  • Get_Federation_All_Groups_Info.xml – Get a list of all iLO Federation Management group memberships and granted privileges
  • Set_Federation_Multicast_Options.xml – Set the iLO Federation Management multicast options for a server.
  • Get_FIPS_Status.xml - Return the status of FIPS mode.
  • Get_FW_Version.xml - Return the version and date/time of the Lights-Out device firmware.
  • Get_Global.xml - Return global settings.
  • Get_Host_APO.xml - Retrieve server automatic power on and power on delay settings.
  • Get_Host_Data.xml - Retrieve SMBIOS data from Server Information page.
  • Get_Host_Power.xml - Return the current power state of the host server.
  • Get_Host_Power_Saver.xml - Return the current Power Regulator setting.
  • Get_Host_Pwr_Micro_Ver.xml - Power Micro Firmware revision information of the server.
  • Get_Host_Pwr_Reg_Info.xml - Obtain the power regulator state information for supported platforms.
  • Get_Hotkey_Config.xml - Retreive the Remote Console hotkeys.
  • Get_iLO_Log.xml - Retrieve the records in the Lights-Out device Event Log.
  • Get_IML.xml - Retrieve the records in the Integrated Management Log. Get_Network.xml - Return network settings.
  • Get_language.xml - This is a sample XML script to get the default language setting and to retrieve the list of installed languages.
  • Get_Network.xml - Return network settings.
  • Get_One_Time_Boot_Order.xml - To retrieve the current State of the One Time Boot.
  • Get_Permouse_Status.xml - Return the status of the Persistent Mouse and Mouse setting.
  • Get_Persistent_Boot_Order.xml - To retrieve the current State of the Boot Order.
  • Get_Power_On_Time.xml – To retrieve the Power On time status.
  • Get_Power_Readings.xml: Return the power readings from the server.
  • Get_PowerCap.xml - Return Power Cap setting.
  • Get_Product_Name.xml - Return the Product Name of server.
  • Get_Pwreg_Alert_Threshold.xml – To retrieve the Power Regulator Alert Threshold settings.
  • Get_Rack_Settings.xml - To return enclosure data for c-Class blade infrastructure.
  • Get_SDCard_Status.xml - To know whether there is an SD card connected to the server.
  • Get_Security_Msg.xml - To retrieve the current security text message set in the iLO Login Banner.
  • Get_Server_FQDN.xml - To get the host server Fully Qualified Domain Name.
  • Get_Server_Name.xml - Return the host server name.
  • Get_SNMP_IM.xml - Return the current SNMP and Insight Manager security settings.
  • Get_SSO_Settings.xml - Retrieve the HP SIM Single Sign-On (SSO) settings.
  • Get_Supported_Boot_Mode.xml - View the server boot mode.
  • Get_Topology.xml - Return BL p-Class rack infrastructure topology.
  • Get_TPM_Status.xml – View the status of the Trusted Platform Module (TPM).
  • Get_UID_Status.xml - Return the current state of the server's Unit ID (UID) on the host server.
  • Get_User.xml - Return the configuration details for a single user.
  • Get_VM_Status.xml - Return the status of the specified Virtual Media device.
  • Hotkey_Config.xml - Change the values for Remote Console hotkeys.
  • hponcfg_reformat.xsl - The stylesheet (.xsl) converts the iLO configuration captured using hponcfgcap.xml to a format that can be used to restore the configuration of iLO.
  • hponcfgcap.xml - Capture the current iLO configuration such as Global Settings, Network Settings, Users Information and Directory Settings to a file using HPONCFG.
  • ilo_perl_xml.pdf - Document PERL script usage.
  • Import_2Factor_Cert.xml - Import certificates into iLO.
  • Import_Cert.xml - Import a signed certificate into a Lights-Out device.
  • Import_SSH_Key.xml - Imports SSH key into a Lights-Out device.
  • Insert_Virtual_Media.xml - Inserts the Virtual Media image via specified URL.
  • License.xml - Add the iLO Advanced Pack license key for a server.
  • locfg.pl - Sample PERL script to send XML commands.
  • Lock_Configuration.xml - To configure OS Lock settings.
  • Mod_2Factor.xml - Configure two-factor authentication settings.
  • Mod_Blade_Rack.xml - Change the BL p-Class blade and rack settings.
  • Mod_ConsoleCapture_Port_Settings.xml - This is a sample XML script to disable or enable console capture port for iLO 2.
  • Mod_DiagPort_Settings.xml - Change the Lights-Out device Diagnostic Port network settings.
  • Mod_Directory.xml - Change the directory settings of an Lights-Out device.
  • Mod_Enc_Bay_IP_Settings.xml - Modify the static IP settings of individual blades in the respective enclosure.
  • Mod_Federation_Group.xml – Modify iLO Federation Management group membership and associated privileges.
  • Mod_Global_Settings.xml - Change the Lights-Out device Global Settings.
  • Mod_Kerberos_Config.xml - To configure Kerberos configuration.
  • Mod_Network_Settings.xml - Change the Lights-Out device Network Settings.
  • Mod_Schemaless_Directory.xml - Change the Schemaless directory settings of an iLO.
  • Mod_SNMP_IM_Settings.xml - Change the Lights-Out device SNMP and Insight Manager Settings.
  • Mod_SSO_Settings.xml - Configure the HP SIM Single Sign-On (SSO) settings.
  • Mod_User.xml - Change the login id, display name, password and/or privileges for an existing user account on a Lights-Out device.
  • Mod_VLAN.xml - Configure virtual LAN settings on a Light-Out device.
  • Mod_VM_Port_Settings.xml - This is a sample XML script to disable or enable virtual media for iLO 2.
  • Mod_VSP_Flow_Control.xml - Configure the VSP Flow control Settings.
  • Profile_Apply.xml - To set the Profile Descriptor in iLO.
  • Profile_Apply_Get_Results.xml - To get the results from the Profile_Apply.
  • Profile_Desc_Delete.xml - To delete the Profile Descriptor.
  • Profile_Desc_Download.xml - To write a Profile Description, download a specific blob and write the blob to the blob store.
  • Profile_Desc_List.xml - To list all the Profile Descriptors and the data stored in the Profile Descriptor.
  • RBSU_POST_IP.xml - Configure Lights-Out device to display the IP address at POST.
  • Reset_RIB.xml - Restart the Lights-Out Management Processor.
  • Reset_Server.xml - Immediately power off and back on the host server.
  • Send_Snmp_Test_Trap.xml - To send a test SNMP trap to the alert destinations configured for the iLO.
  • Set_AHS_Status.xml - This is a sample XML script to enable or disable AHS logging.
  • Set_Boot_Mode.xml – Set the server’s pending boot mode.
  • Set_Brownout.xml - This is a sample XML script to enable or disable brownout support.
  • Set_CSR_Custom.xml - Set certificate signing request settings with custom subject info.
  • Set_CSR_Default.xml - Set certificate signing request settings to default subject info.
  • Set_FIPS_Enable.xml - This is a sample XML script to enable FIPS mode.
  • Set_Fqdn.xml - To change the iLO SSL self signed certificate FQDN selection.
  • Set_Host_APO.xml - Change server automatic power on and power on delay settings.
  • Set_Host_Power.xml - Power on/off the host server.
  • Set_Host_Power_Saver.xml - Change the Power Regulator setting.
  • Set_Language.xml - This is a sample XML script to set the default language on iLO.
  • Set_One_Time_Boot_Order.xml - To Set One Time Boot Order.
  • Set_Permouse_Status - Change the Persistent Mouse and Keyboard setting.
  • Set_Persistent_Boot_Order.xml – Set the server’s persistent boot mode.
  • Set_PowerCap.xml - Change the Power Cap setting.
  • Set_Pwreg_Alert_Threshold.xml
  • Set_Security_Msg.xml - To configure the current security text message set in the iLO Login Banner.
  • Set_Server_FQDN.xml - This is a sample XML script to set the host server Fully Qualified Domain Name.
  • Set_Server_Name.xml: Set the host server name.
  • Set_Virtual_Power_BTN.xml - To execute cold boot and warm boot of the server and to simulate a physical press of the server power button.
  • Set_VM_Status.xml - Set the boot options; write protection of the specified Virtual Media device.
  • Shared_Network_Port.xml - Configure Lights-Out device to pass network traffic on the shared host network port on supported platforms.
  • UID_Control.xml - Turn on/off the Unit ID (UID) light on the host server.
  • Update_Firmware.xml - Flash the Lights-Out device firmware to a new version.
  • Update_Language.xml - Updates the iLO Language Pack.
  • vspconfig.pl - Set the Virtual Serial Port Configuration for Linux.
  • linux-LOsamplescripts4.50.0.txt - README file.

A valid iLO user account and password is required for each XML script when using LOCFG.PL. The user account must have appropriate lights-out privileges to process the request.

The locfg.pl script connects to the iLO management processor using a Secure Sockets Layer (SSL) connection where:
perl locfg.pl -s {servername|ipaddress}[:port] [-l logfilename] -f input_filename [-u username -p password] [-ilo2|-ilo3|-ilo4]

  • -s servername is the DNS name of target server.
  • -s ipaddress is the IP Address of the target server. If a port is not specified, the port will default to :443. DO NOT USE this switch if launching from System Insight Manager.
  • -l logfilename is the name of the file to log all output to. A default file with the server name/ipaddress is created if this option is not specified. DO NOT USE this switch if launching from System Insight Manager.
  • -f input_filename is the filename containing the RIB Commands
  • -u username is the iLO user account name
  • -p password  Command line user name and password override those which are in the script file.

Note: Use -u and -p with caution as command line options are visible on Linux.

  • -ilo2|-ilo3|ilo4 - Specifies the type of device on the server.  Note: locfg.pl detects the device automatically if this option is not present.

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Notes:

Documentation:
HP Integrated Lights-Out 4 User Guide, HP Integrated Lights-Out 3 User Guide, HP Integrated Lights-Out 2 User Guide, HP Integrated Lights-Out User Guide, and HP Integrated Lights-Out Scripting and Command Line Resource Guide can also be found by following the link at: http://h18013.www1.hp.com/products/servers/management/ilo/documentation.html.

Select manuals under self help resources for a list of product documentation.

See "HP Integrated Lights-Out Management Processor Scripting and Command Line Resource Guide" for more information on scripting and the syntax of the RIBCL XML.


Version:5.10.0 (9 Sep 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Added Get_PS_Data.xml to sample script bundle.


Version:5.00.0 (12 Jul 2017)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


iLO 5 support introduced in LOCFG.pl.


Version:4.91.0 (15 May 2017)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Support for iLO 4 v2.53 firmware -

  • Ability to enable Generic LDAP from Mod_Directory.xml
  • Ability to Import LDAP CA certificate into an iLO using Import_LDAP_CA_Cert.xml
  • Ability to get LDAP CA certificate status using Get_LDAP_CA_Cert_Status.xml

Version:4.90.0 (24 Oct 2016)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Added a new tag to Mod_Network_Settings.xml

  • IPMI_DCMI_OVER_LAN_PORT

Version:4.80.0 (1 Apr 2016)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Added support to set or get the critical temperature shutdown behavior of a server

  • Set_Host_CTRO.xml
  • Get_Host_CTRO.xml

Added support to perform Directory Tests

  • Start_Directory_Test.xml
  • Get_Directory_Test_Results.xml
  • Abort_Directory_test.xml

Added 4 new tags to Mod_Network_Settings.xml

  • ILO_NIC_AUTO_SNP_SCAN
  • ILO_NIC_AUTO_DELAY
  • ILO_NIC_FAIL_OVER
  • ILO_NIC_FAIL_OVER_DELAY

Version:4.70.0 (1 Oct 2015)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • AUTHENTICATION_FAILURE_DELAY_SECS, AUTHENTICATION_FAILURES_BEFORE_DELAY and LOCK_CONFIGURATION tags added to Mod_Global_Settings.xml


Version:4.60.0 (15 Jun 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Improved error handling for script execution in LOCFG.pl
Enhancements

  • Introduced FEDERATION_ENABLE tag in Set_Federation_Multicast_Options.xml
  • 4 new scripts added for Hard Drive zoning - HD_Zone_Defaults.xml, HD_Zone_ReadBackplaneInfo.xml, HD_Zone_ReadZoneTable.xml and HD_Zone_Write_Zone.xml

Version:4.50.0 (30 Mar 2015)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


- Introduced SNP_PORT tag in Shared_Network_Port.xml
- Added DHCPV6_DOMAIN_NAME and ILO_NIC_AUTO_SELECT tags in Mod_Network_Settings.xml
- SSL_V3_ENABLE tag for iLO2 Management Processor is included in MOD_GLOBAL_SETTINGS.xml
- Result of script execution gets printed at the end of each run in LOCFG.PL
- 2 new scripts added - Get_SDCard_Status.xml and Send_Snmp_Test_Trap.xml


Version:4.40.0 (9 Sep 2014)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


LOCFG.PL supports iLO fully qualified domain name(FQDN) with –s option


Version:4.30.0 (14 Jan 2014)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


None

Enhancements

New scripts added:

  • Add_Federation_Group.xml
  • Delete_Federation_Group.xml
  • ERS_DC_CompleteRegistration.xml
  • ERS_DC_RegisterDevice.xml
  • Get_Boot_Mode.xml
  • Get_Current_Boot_Mode.xml
  • Get_Federation_All_Groups.xml
  • Get_Federation_All_Groups_Info.xml
  • Get_Federation_Group.xml
  • Get_Federation_Multicast_Options.xml
  • Get_Supported_Boot_Mode.xml
  • Get_TPM_Status.xml
  • Mod_Federation_Group.xml
  • Set_Federation_Multicast_Options.xml
  • Set_Boot_Mode.xml
  • Set_Persistent_Boot_Order.xml

Version:4.12.0 (13 May 2013)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


None

Enhancements

Added the following scripts:

  • Set_Persmouse_Status.xml
  • Get_Persmouse_Status.xml

Version:4.11.0 (19 Feb 2013)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • New scripts added:
    • Get_Server_FQDN.xml - This is a sample XML script to get the host server Fully Qualified Domain Name.
    • Set_Server_FQDN.xml - This is a sample XML script to set the host server Fully Qualified Domain Name.
    • Get_Rack_Settings.xml - This is a sample XML script to return enclosure data for c-Class Blade infrastructure.
    • Get_All_Licenses.xml - This is a sample XML script to get the license information.
    • Set_Fips_Enable.xml - This is a sample XML script to enable FIPS mode.
    • Get_Fips_Status.xml - This is a sample XML script to return the current FIPS Mode
       
  • New tags added for supporting the following features:
    • New tags added in Mod_Global_Settings.xml to set Remote Syslog and Alert Mail in iLO 4.
    • New tags added in Mod_SNMP_IM_Setttings.xml to set SNMP traps.

Version:4.10.0 (24 Sep 2012)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • New scripts added:
    • Set_Security_Msg.xml & Get_Security_Msg.xml scripts to retrieve / configure the current security text message set in the iLO Login Banner.
    • Set_FIPS_Enable.xml & Get_FIPS_Status.xml scripts are added to enable FIP’s mode / retrieve current FIP’s Mode in iLO
    • Hotkey_Config.xml - to configure a set of Remote Console hotkeys for iLO
    • Get_Hotkey_Config.xml - to get the Remote Console hotkeys from iLO.
    • Delete_SSH_Key.xml - deletes existing SSH key saved for the user that is referred by the USER_LOGIN value.
    • Cert_Request.xml - to get a certificate signing request from iLO.
    • Profile_Apply.xml - set the Profile Descriptor in iLO.
    • Profile_Apply_Get_Results.xml - to get the results from the Profile_Apply.
    • Profile_Desc_Delete.xml - to delete the Profile Descriptor.
    • Profile_Desc_List.xml - to list all the Profile Descriptors and the data stored in the Profile Descriptor.
    • Profile_Desc_Download.xml - to write a Profile Description, download a specific blob and write the blob to the blob store. 
  • New tags added for supporting the following features:
    • New tags added in Mod_Global_Settings.xml to set the value for SNMP port and SNMP trap port in iLO.
    • New tags added in Mod_Network_Settings.xml for configuring IPv6 network settings.

Version:4.00.0 (16 Apr 2012)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Added scripts to support iLO 4.    

Version:3.10.0 (9 Jun 2011)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


New Scripts Added:

Mod_Kerberos_Config.xml
  • Set_Fqdn.xml
  • Set_default_language.xml
  • Set_One_Time_Boot_Order.xml
  • Set_Persistent_Boot_Order.xml
  • Get_language.xml
  • Get_One_Time_Boot_Order.xml
  • Get_Persistent_Boot_Order.xml
  • Delete_SSH_Key.xml
  • Set_CSR_Custom.xml
  • Set_CSR_Default.xml 
  • Get_Cert_Subject.xml
  • Mod_ConsoleCapture_Port_Settings.xml
  • Mod_VM_Port_Settings.xml
  •  


    Version:3.0.0-2 (26 May 2010)
    Enhancements

    Upgrade Requirement:
    Recommended - HP recommends users update to this version at their earliest convenience.

    Includes support for iLO 3


    Provided support for Integrated Lights-Outs 3 (iLO 3).

    New Script Added:
       - Clear_Power_On_Time.xml
       - Get_Power_On_Time.xml
       - Get_Pwreg_Alert_Threshold.xml
       - Lock_Configuration.xml
       - Mod_Network_Settings.xml
       - Set_Pwreg_Alert_Threshold.xml


    Version:2.40.0-1 (7 May 2009)
    Enhancements

    Added the following sample scripts:

    • Import_SSH_Key.xml
    • Get_Host_Pwr_Micro_Ver.xml

    Added the following configuration options to Mod_Global_Settings.xml:

    • KEY_UP_KEY_DOWN
    • CAPTURE_MANUAL_EXPORT

    Added the following option to Update_Firmware.xml

    • TPM_ENABLED

    Added the following option to Mod_Directory.xml

    • DIR_USER_CONTEXT_X

    where X can be from 4 to 15.


      Version:2.30.0-1 (19 Jun 2008)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      Added the following sample scripts:

      • hponcfgcap.xml
      • hponcfg_reformat.xsl
      • vspconfig.pl
      • Mod_VSP_Flow_Control.xml

      Added the following configuration options to Mod_Global_Settings.xml:

      • VSP_SOFTWARE_FLOW_CONTROL
      • RAWVSP_PORT
      • RAW_SERIAL_PORT

      Added a documentation  for Mod_Directory.xml script.The documentation provides steps required to configure Directory Default Schema.

       


      Version:2.20.0-1 (26 Jul 2007)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      New support for iLO 2 v1.30.

      Added following sample scripts:

      • Add_SSO_Rec.xml
      • Add_SSO_Settings.xml
      • Mod_SSO_Settings.xml
      • Add_SSO_Rec.xml
      • Delete_SSO_Rec.xml
      • Clear_IML.xml
      • Computer_Lock_Config.xml
      • Get_PowerCap.xml
      • Get_Server_Name.xml
      • Set_Server_Name.xml
      • Set_PowerCap.xml
      Added following commands to Mod_Global_Settings.xml:
      • ENFORCE_AES
      • AUTHENTICATION_FAILURE_LOGGINS
      • CONSOLE_CAPTURE_ENABLE
      • CONSOLE_CAPTURE_BOOT_BUFFER_ENABLE
      • CONSOLE_CAPTURE_FAULT_BUFFER_ENABLE
      • INTERACTIVE_CONSOLE_REPLAY_ENABLE
      • CONSOLE_CAPTURE_PORT
      • CAPTURE_AUTO_EXPORT_ENABLE
      • CAPTURE_AUTO_EXPORT_LOCATION
      • CAPTURE_AUTO_EXPORT_USERNAME
      • CAPTURE_AUTO_EXPORT_PASSWORD
      • SHARED_CONSOLE_ENABLE
      • SHARED_CONSOLE_PORT
      Added locfg.pl command line options "-u username" and "-p password".
    • Note: Use "-u" and "-p" with caution as comamnd line options are visible on Linux.

    • Version:2.10.0-1 (12 Jul 2006)
      Fixes

      Upgrade Requirement:
      Recommended - HPE recommends users update to this version at their earliest convenience.


      Fixed tag names for ILO 2 in Mod_VLAN.xml.

      Enhancements

      New support for iLO 2 v1.1x and v1.20.

      Added following sample scripts:

      • Copy_Virtual_Floppy.xml
      • Get_All_Cables_Status.xml
      • Get_EmHealth.xml
      • Get_Host_APO.xml
      • Get_Power_Readings.xml
      • Get_VPB_Cable_Status.xml
      • Set_Host_APO.xml

      Version:2.00.0-1 (2 Feb 2006)
      Fixes

      Upgrade Requirement:
      Recommended - HPE recommends users update to this version at their earliest convenience.


      Added sample script for set_host_power
      Updated get_ilo_log to not use RIB info mode write Fixes typos in scripts.

      Enhancements

      New support for iLO 2 v1.0x and RILOE-II v1.20.


      Version:1.80.0-1 (14 Jul 2005)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      The following scripts have been added or modified to support additional firmware features available in 1.80:
      NEW SAMPLE SCRIPTS
      Mod_VLAN.xml
      Mod_Schemaless_Directory.xml
      Get_Host_Pwr_Reg_Info.xml
      Mod_2Factor.xml
      Import_2Factor_Certs.xml
      Get_2Factor.xml


      Version:1.70.0-1 (26 Mar 2005)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      The following scripts have been added or modified to support additional firmware features available in 1.70:

        NEW SAMPLE SCRIPTS
        Get_Host_Power_Saver.xml
        Set_Host_Power_Saver.xml

      Version:1.64.0-1 (19 Nov 2004)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      The following scripts have been added or modified to support additional firmware features available in 1.64:

      • Cert_Request.xml

      • Import_Cert.xml

      Version:1.60 (30 Jul 2004)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      The following scripts have been added or modified to support additional firmware features available in 1.55 and 1.60:

      • NEW SAMPLE SCRIPTS
        Eject_Virtual_Media.xml
        Get_VM_Status.xml
        Insert_Virtual_Media.xml
        Set_VM_Status.xml
        Get_Host_Data.xml
        Shared_Network_Port.xml
        RBSU_POST_IP.xml
        Get_IML.xml
        Get_iLO_Log.xml
        Administrator_reset_pw.xml
        Get_Enc_Bay_IP_Settings.xml
        Mod_Network_Settings.xml
        Mod_Enc_Bay_IP_Settings.xml

      • NEW UTILITY
        The HPONCFG.EXE utility is now available, allowing you to use RIBCL scripts on line while running from the host.

        Requirements:

        • iLO 1.41 or later

        • RILOE II 1.13

        • the approprite lights-out driver

        HPONCFG passes the scripts to the local lights-out processor when running from an Administrator or root account on the host.

        You can use this utility to configure and operate lights-out without using the network connection. The utility accepts existing RIBCL scripts.


      Version:1.1 (23 Jan 2004)
      Enhancements
      Initial release.

      Type: Software - Lights-Out Management
      Version: 4.50.0(30 Mar 2015)
      Operating System(s):
      Red Hat Enterprise Linux 5 Server (x86)
      Red Hat Enterprise Linux 5 Server (x86-64)
      Red Hat Enterprise Linux 6 Server (x86)
      Red Hat Enterprise Linux 6 Server (x86-64)
      Red Hat Enterprise Linux 7 Server
      SUSE Linux Enterprise Server 10 (AMD64/EM64T)
      SUSE Linux Enterprise Server 10 (x86)
      SUSE Linux Enterprise Server 11 (AMD64/EM64T)
      SUSE Linux Enterprise Server 11 (x86)
      SUSE Linux Enterprise Server 12
      VMware ESX/ESXi 4.0
      VMware ESX/ESXi 4.1
      VMware ESXi 5.0

      Description

      This is a set of sample XML scripts used to manage the configuration of Integrated Lights-Out (iLO) management processors and to control servers in which iLO devices are in use. Use LOCFG.PL (available in this bundle) to run the XML.

      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      - Introduced SNP_PORT tag in Shared_Network_Port.xml
      - Added DHCPV6_DOMAIN_NAME and ILO_NIC_AUTO_SELECT tags in Mod_Network_Settings.xml
      - SSL_V3_ENABLE tag for iLO2 Management Processor is included in MOD_GLOBAL_SETTINGS.xml
      - Result of script execution gets printed at the end of each run in LOCFG.PL
      - 2 new scripts added - Get_SDCard_Status.xml and Send_Snmp_Test_Trap.xml

      Installation Instructions

      To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

      b78a03fbce52d3f0e696a68bdf206828facbdaf7fa19a6d1517ee1bdd6cabedd linux-LOsamplescripts4.50.0.tgz

      Reboot Requirement:
      Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


      Installation:
      Unzip/Untar linux-LOsamplescripts4.50.0.tgz to a subdirectory. This file contains the following scripts:

      • Add_Federation_Group.xml – Add an iLO Federation Management group membership and grant associated privileges.
      • Add_SSO_Rec.xml - Add an HP SIM Single Sign-On (SSO) record to the end of the database.
      • Add_User.xml - Add a user to the Lights-Out device user database.
      • Administrator_reset_pw.xml - Reset the default administrator account password using HPONCFG.
      • Cert_Request.xml - Request a Certificate Signing Request from Lights-Out device.
      • Change_Password.xml - Change the password of an existing Light-Out device user.
      • Clear_AHS_Data.xml - This is a sample XML script to clear AHS data.
      • Clear_EventLog.xml - Clear the Light-Out device Event Log.
      • Clear_IML.xml - Clear the server Integrated Management Log (IML).
      • Clear_Power_On_Time.xml
      • Computer_Lock_Config.xml - Change the values for Computer Lock settings.
      • Delete_Federation_Group.xml – Delete an iLO Federation Management group membership.
      • Delete_SSH_Key.xml - deletes existing SSH key.
      • Delete_SSO_Rec.xml - Delete an HP SIM Single Sign-On (SSO) record by index.
      • Delete_User.xml - Delete a user from the Light-Out device user database.
      • Eject_Virtual_Media.xml - Ejects the image of the specified Virtual Media device.
      • ERS_DC_CompleteRegistration.xml - Complete step 2 in the Insight Remote Support Direct Connect registration process.
      • ERS_DC_RegisterDevice.xml - Complete step 1 in the Insight Remote Support Direct Connect Registration process.
      • Factory_Defaults.xml - Set the Lights-Out device to factory default settings.
      • Get_2Factor.xml - Obtain the two factor authentication configuration settings.
      • Get_AHS_Status.xml - This is a sample XML script to find out if AHS is enabled or disabled.
      • Get_All_Languages.xml - This is a sample XML script to read all languages that are supported on iLO.
      • Get_All_Licenses.xml - This is a sample XML script to get the license information.
      • Get_All_User_Info.xml - Return the configuration details for all users.
      • Get_All_Users.xml - Return a list of all user accounts on Lights-Out device.
      • Get_Boot_Mode.xml – Get the server’s pending boot mode.
      • Get_Cert_Subject.xml - Retrieve iLO2 certificate subject information.
      • Get_Current_Boot_Mode.xml – Get the server’s current boot mode.
      • Get_Diagport.xml - Return BL p-class diagport settings.
      • Get_Directory.xml - Return the current directory configuration of an Lights-Out device.
      • Get_Embedded_Health.xml - Return the current embedded health status.
      • Get_EmHealth.xml - Return the health information of the server.
      • Get_Enc_Bay_IP_Settings.xml - Obtain static IP settings of individual blades in the respective enclosure.
      • Get_Federation_All_Groups.xml – View the iLO Federation Management group memberships for a server
      • Get_Federation_All_Groups_Info.xml – Get a list of all iLO Federation Management group memberships and granted privileges
      • Set_Federation_Multicast_Options.xml – Set the iLO Federation Management multicast options for a server.
      • Get_FIPS_Status.xml - Return the status of FIPS mode.
      • Get_FW_Version.xml - Return the version and date/time of the Lights-Out device firmware.
      • Get_Global.xml - Return global settings.
      • Get_Host_APO.xml - Retrieve server automatic power on and power on delay settings.
      • Get_Host_Data.xml - Retrieve SMBIOS data from Server Information page.
      • Get_Host_Power.xml - Return the current power state of the host server.
      • Get_Host_Power_Saver.xml - Return the current Power Regulator setting.
      • Get_Host_Pwr_Micro_Ver.xml - Power Micro Firmware revision information of the server.
      • Get_Host_Pwr_Reg_Info.xml - Obtain the power regulator state information for supported platforms.
      • Get_Hotkey_Config.xml - Retreive the Remote Console hotkeys.
      • Get_iLO_Log.xml - Retrieve the records in the Lights-Out device Event Log.
      • Get_IML.xml - Retrieve the records in the Integrated Management Log. Get_Network.xml - Return network settings.
      • Get_language.xml - This is a sample XML script to get the default language setting and to retrieve the list of installed languages.
      • Get_Network.xml - Return network settings.
      • Get_One_Time_Boot_Order.xml - To retrieve the current State of the One Time Boot.
      • Get_Permouse_Status.xml - Return the status of the Persistent Mouse and Mouse setting.
      • Get_Persistent_Boot_Order.xml - To retrieve the current State of the Boot Order.
      • Get_Power_On_Time.xml – To retrieve the Power On time status.
      • Get_Power_Readings.xml: Return the power readings from the server.
      • Get_PowerCap.xml - Return Power Cap setting.
      • Get_Product_Name.xml - Return the Product Name of server.
      • Get_Pwreg_Alert_Threshold.xml – To retrieve the Power Regulator Alert Threshold settings.
      • Get_Rack_Settings.xml - To return enclosure data for c-Class blade infrastructure.
      • Get_SDCard_Status.xml - To know whether there is an SD card connected to the server.
      • Get_Security_Msg.xml - To retrieve the current security text message set in the iLO Login Banner.
      • Get_Server_FQDN.xml - To get the host server Fully Qualified Domain Name.
      • Get_Server_Name.xml - Return the host server name.
      • Get_SNMP_IM.xml - Return the current SNMP and Insight Manager security settings.
      • Get_SSO_Settings.xml - Retrieve the HP SIM Single Sign-On (SSO) settings.
      • Get_Supported_Boot_Mode.xml - View the server boot mode.
      • Get_Topology.xml - Return BL p-Class rack infrastructure topology.
      • Get_TPM_Status.xml – View the status of the Trusted Platform Module (TPM).
      • Get_UID_Status.xml - Return the current state of the server's Unit ID (UID) on the host server.
      • Get_User.xml - Return the configuration details for a single user.
      • Get_VM_Status.xml - Return the status of the specified Virtual Media device.
      • Hotkey_Config.xml - Change the values for Remote Console hotkeys.
      • hponcfg_reformat.xsl - The stylesheet (.xsl) converts the iLO configuration captured using hponcfgcap.xml to a format that can be used to restore the configuration of iLO.
      • hponcfgcap.xml - Capture the current iLO configuration such as Global Settings, Network Settings, Users Information and Directory Settings to a file using HPONCFG.
      • ilo_perl_xml.pdf - Document PERL script usage.
      • Import_2Factor_Cert.xml - Import certificates into iLO.
      • Import_Cert.xml - Import a signed certificate into a Lights-Out device.
      • Import_SSH_Key.xml - Imports SSH key into a Lights-Out device.
      • Insert_Virtual_Media.xml - Inserts the Virtual Media image via specified URL.
      • License.xml - Add the iLO Advanced Pack license key for a server.
      • locfg.pl - Sample PERL script to send XML commands.
      • Lock_Configuration.xml - To configure OS Lock settings.
      • Mod_2Factor.xml - Configure two-factor authentication settings.
      • Mod_Blade_Rack.xml - Change the BL p-Class blade and rack settings.
      • Mod_ConsoleCapture_Port_Settings.xml - This is a sample XML script to disable or enable console capture port for iLO 2.
      • Mod_DiagPort_Settings.xml - Change the Lights-Out device Diagnostic Port network settings.
      • Mod_Directory.xml - Change the directory settings of an Lights-Out device.
      • Mod_Enc_Bay_IP_Settings.xml - Modify the static IP settings of individual blades in the respective enclosure.
      • Mod_Federation_Group.xml – Modify iLO Federation Management group membership and associated privileges.
      • Mod_Global_Settings.xml - Change the Lights-Out device Global Settings.
      • Mod_Kerberos_Config.xml - To configure Kerberos configuration.
      • Mod_Network_Settings.xml - Change the Lights-Out device Network Settings.
      • Mod_Schemaless_Directory.xml - Change the Schemaless directory settings of an iLO.
      • Mod_SNMP_IM_Settings.xml - Change the Lights-Out device SNMP and Insight Manager Settings.
      • Mod_SSO_Settings.xml - Configure the HP SIM Single Sign-On (SSO) settings.
      • Mod_User.xml - Change the login id, display name, password and/or privileges for an existing user account on a Lights-Out device.
      • Mod_VLAN.xml - Configure virtual LAN settings on a Light-Out device.
      • Mod_VM_Port_Settings.xml - This is a sample XML script to disable or enable virtual media for iLO 2.
      • Mod_VSP_Flow_Control.xml - Configure the VSP Flow control Settings.
      • Profile_Apply.xml - To set the Profile Descriptor in iLO.
      • Profile_Apply_Get_Results.xml - To get the results from the Profile_Apply.
      • Profile_Desc_Delete.xml - To delete the Profile Descriptor.
      • Profile_Desc_Download.xml - To write a Profile Description, download a specific blob and write the blob to the blob store.
      • Profile_Desc_List.xml - To list all the Profile Descriptors and the data stored in the Profile Descriptor.
      • RBSU_POST_IP.xml - Configure Lights-Out device to display the IP address at POST.
      • Reset_RIB.xml - Restart the Lights-Out Management Processor.
      • Reset_Server.xml - Immediately power off and back on the host server.
      • Send_Snmp_Test_Trap.xml - To send a test SNMP trap to the alert destinations configured for the iLO.
      • Set_AHS_Status.xml - This is a sample XML script to enable or disable AHS logging.
      • Set_Boot_Mode.xml – Set the server’s pending boot mode.
      • Set_Brownout.xml - This is a sample XML script to enable or disable brownout support.
      • Set_CSR_Custom.xml - Set certificate signing request settings with custom subject info.
      • Set_CSR_Default.xml - Set certificate signing request settings to default subject info.
      • Set_FIPS_Enable.xml - This is a sample XML script to enable FIPS mode.
      • Set_Fqdn.xml - To change the iLO SSL self signed certificate FQDN selection.
      • Set_Host_APO.xml - Change server automatic power on and power on delay settings.
      • Set_Host_Power.xml - Power on/off the host server.
      • Set_Host_Power_Saver.xml - Change the Power Regulator setting.
      • Set_Language.xml - This is a sample XML script to set the default language on iLO.
      • Set_One_Time_Boot_Order.xml - To Set One Time Boot Order.
      • Set_Permouse_Status - Change the Persistent Mouse and Keyboard setting.
      • Set_Persistent_Boot_Order.xml – Set the server’s persistent boot mode.
      • Set_PowerCap.xml - Change the Power Cap setting.
      • Set_Pwreg_Alert_Threshold.xml
      • Set_Security_Msg.xml - To configure the current security text message set in the iLO Login Banner.
      • Set_Server_FQDN.xml - This is a sample XML script to set the host server Fully Qualified Domain Name.
      • Set_Server_Name.xml: Set the host server name.
      • Set_Virtual_Power_BTN.xml - To execute cold boot and warm boot of the server and to simulate a physical press of the server power button.
      • Set_VM_Status.xml - Set the boot options; write protection of the specified Virtual Media device.
      • Shared_Network_Port.xml - Configure Lights-Out device to pass network traffic on the shared host network port on supported platforms.
      • UID_Control.xml - Turn on/off the Unit ID (UID) light on the host server.
      • Update_Firmware.xml - Flash the Lights-Out device firmware to a new version.
      • Update_Language.xml - Updates the iLO Language Pack.
      • vspconfig.pl - Set the Virtual Serial Port Configuration for Linux.
      • linux-LOsamplescripts4.50.0.txt - README file.

      A valid iLO user account and password is required for each XML script when using LOCFG.PL. The user account must have appropriate lights-out privileges to process the request.

      The locfg.pl script connects to the iLO management processor using a Secure Sockets Layer (SSL) connection where:
      perl locfg.pl -s {servername|ipaddress}[:port] [-l logfilename] -f input_filename [-u username -p password] [-ilo2|-ilo3|-ilo4]

      • -s servername is the DNS name of target server.
      • -s ipaddress is the IP Address of the target server. If a port is not specified, the port will default to :443. DO NOT USE this switch if launching from System Insight Manager.
      • -l logfilename is the name of the file to log all output to. A default file with the server name/ipaddress is created if this option is not specified. DO NOT USE this switch if launching from System Insight Manager.
      • -f input_filename is the filename containing the RIB Commands
      • -u username is the iLO user account name
      • -p password  Command line user name and password override those which are in the script file.

      Note: Use -u and -p with caution as command line options are visible on Linux.

      • -ilo2|-ilo3|ilo4 - Specifies the type of device on the server.  Note: locfg.pl detects the device automatically if this option is not present.

      Release Notes

      End User License Agreements:
      Hewlett-Packard End User License Agreement


      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      Notes:

      Documentation:
      HP Integrated Lights-Out 4 User Guide, HP Integrated Lights-Out 3 User Guide, HP Integrated Lights-Out 2 User Guide, HP Integrated Lights-Out User Guide, and HP Integrated Lights-Out Scripting and Command Line Resource Guide can also be found by following the link at: http://h18013.www1.hp.com/products/servers/management/ilo/documentation.html.

      Select manuals under self help resources for a list of product documentation.

      See "HP Integrated Lights-Out Management Processor Scripting and Command Line Resource Guide" for more information on scripting and the syntax of the RIBCL XML.


      Revision History

      Version:5.10.0 (9 Sep 2019)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      Added Get_PS_Data.xml to sample script bundle.


      Version:5.00.0 (12 Jul 2017)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      iLO 5 support introduced in LOCFG.pl.


      Version:4.91.0 (15 May 2017)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      Support for iLO 4 v2.53 firmware -

      • Ability to enable Generic LDAP from Mod_Directory.xml
      • Ability to Import LDAP CA certificate into an iLO using Import_LDAP_CA_Cert.xml
      • Ability to get LDAP CA certificate status using Get_LDAP_CA_Cert_Status.xml

      Version:4.90.0 (24 Oct 2016)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      Added a new tag to Mod_Network_Settings.xml

      • IPMI_DCMI_OVER_LAN_PORT

      Version:4.80.0 (1 Apr 2016)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      Added support to set or get the critical temperature shutdown behavior of a server

      • Set_Host_CTRO.xml
      • Get_Host_CTRO.xml

      Added support to perform Directory Tests

      • Start_Directory_Test.xml
      • Get_Directory_Test_Results.xml
      • Abort_Directory_test.xml

      Added 4 new tags to Mod_Network_Settings.xml

      • ILO_NIC_AUTO_SNP_SCAN
      • ILO_NIC_AUTO_DELAY
      • ILO_NIC_FAIL_OVER
      • ILO_NIC_FAIL_OVER_DELAY

      Version:4.70.0 (1 Oct 2015)
      Fixes

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      • AUTHENTICATION_FAILURE_DELAY_SECS, AUTHENTICATION_FAILURES_BEFORE_DELAY and LOCK_CONFIGURATION tags added to Mod_Global_Settings.xml


      Version:4.60.0 (15 Jun 2015)
      Fixes

      Upgrade Requirement:
      Recommended - HPE recommends users update to this version at their earliest convenience.


      • Improved error handling for script execution in LOCFG.pl
      Enhancements

      • Introduced FEDERATION_ENABLE tag in Set_Federation_Multicast_Options.xml
      • 4 new scripts added for Hard Drive zoning - HD_Zone_Defaults.xml, HD_Zone_ReadBackplaneInfo.xml, HD_Zone_ReadZoneTable.xml and HD_Zone_Write_Zone.xml

      Version:4.50.0 (30 Mar 2015)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      - Introduced SNP_PORT tag in Shared_Network_Port.xml
      - Added DHCPV6_DOMAIN_NAME and ILO_NIC_AUTO_SELECT tags in Mod_Network_Settings.xml
      - SSL_V3_ENABLE tag for iLO2 Management Processor is included in MOD_GLOBAL_SETTINGS.xml
      - Result of script execution gets printed at the end of each run in LOCFG.PL
      - 2 new scripts added - Get_SDCard_Status.xml and Send_Snmp_Test_Trap.xml


      Version:4.40.0 (9 Sep 2014)
      Fixes

      Upgrade Requirement:
      Recommended - HP recommends users update to this version at their earliest convenience.


      LOCFG.PL supports iLO fully qualified domain name(FQDN) with –s option


      Version:4.30.0 (14 Jan 2014)
      Fixes

      Upgrade Requirement:
      Recommended - HP recommends users update to this version at their earliest convenience.


      None

      Enhancements

      New scripts added:

      • Add_Federation_Group.xml
      • Delete_Federation_Group.xml
      • ERS_DC_CompleteRegistration.xml
      • ERS_DC_RegisterDevice.xml
      • Get_Boot_Mode.xml
      • Get_Current_Boot_Mode.xml
      • Get_Federation_All_Groups.xml
      • Get_Federation_All_Groups_Info.xml
      • Get_Federation_Group.xml
      • Get_Federation_Multicast_Options.xml
      • Get_Supported_Boot_Mode.xml
      • Get_TPM_Status.xml
      • Mod_Federation_Group.xml
      • Set_Federation_Multicast_Options.xml
      • Set_Boot_Mode.xml
      • Set_Persistent_Boot_Order.xml

      Version:4.12.0 (13 May 2013)
      Fixes

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      None

      Enhancements

      Added the following scripts:

      • Set_Persmouse_Status.xml
      • Get_Persmouse_Status.xml

      Version:4.11.0 (19 Feb 2013)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      • New scripts added:
        • Get_Server_FQDN.xml - This is a sample XML script to get the host server Fully Qualified Domain Name.
        • Set_Server_FQDN.xml - This is a sample XML script to set the host server Fully Qualified Domain Name.
        • Get_Rack_Settings.xml - This is a sample XML script to return enclosure data for c-Class Blade infrastructure.
        • Get_All_Licenses.xml - This is a sample XML script to get the license information.
        • Set_Fips_Enable.xml - This is a sample XML script to enable FIPS mode.
        • Get_Fips_Status.xml - This is a sample XML script to return the current FIPS Mode
           
      • New tags added for supporting the following features:
        • New tags added in Mod_Global_Settings.xml to set Remote Syslog and Alert Mail in iLO 4.
        • New tags added in Mod_SNMP_IM_Setttings.xml to set SNMP traps.

      Version:4.10.0 (24 Sep 2012)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      • New scripts added:
        • Set_Security_Msg.xml & Get_Security_Msg.xml scripts to retrieve / configure the current security text message set in the iLO Login Banner.
        • Set_FIPS_Enable.xml & Get_FIPS_Status.xml scripts are added to enable FIP’s mode / retrieve current FIP’s Mode in iLO
        • Hotkey_Config.xml - to configure a set of Remote Console hotkeys for iLO
        • Get_Hotkey_Config.xml - to get the Remote Console hotkeys from iLO.
        • Delete_SSH_Key.xml - deletes existing SSH key saved for the user that is referred by the USER_LOGIN value.
        • Cert_Request.xml - to get a certificate signing request from iLO.
        • Profile_Apply.xml - set the Profile Descriptor in iLO.
        • Profile_Apply_Get_Results.xml - to get the results from the Profile_Apply.
        • Profile_Desc_Delete.xml - to delete the Profile Descriptor.
        • Profile_Desc_List.xml - to list all the Profile Descriptors and the data stored in the Profile Descriptor.
        • Profile_Desc_Download.xml - to write a Profile Description, download a specific blob and write the blob to the blob store. 
      • New tags added for supporting the following features:
        • New tags added in Mod_Global_Settings.xml to set the value for SNMP port and SNMP trap port in iLO.
        • New tags added in Mod_Network_Settings.xml for configuring IPv6 network settings.

      Version:4.00.0 (16 Apr 2012)
      Enhancements

      Upgrade Requirement:
      Recommended - HP recommends users update to this version at their earliest convenience.


      • Added scripts to support iLO 4.    

      Version:3.10.0 (9 Jun 2011)
      Enhancements

      Upgrade Requirement:
      Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


      New Scripts Added:

      Mod_Kerberos_Config.xml
    • Set_Fqdn.xml
    • Set_default_language.xml
    • Set_One_Time_Boot_Order.xml
    • Set_Persistent_Boot_Order.xml
    • Get_language.xml
    • Get_One_Time_Boot_Order.xml
    • Get_Persistent_Boot_Order.xml
    • Delete_SSH_Key.xml
    • Set_CSR_Custom.xml
    • Set_CSR_Default.xml 
    • Get_Cert_Subject.xml
    • Mod_ConsoleCapture_Port_Settings.xml
    • Mod_VM_Port_Settings.xml
    •  


      Version:3.0.0-2 (26 May 2010)
      Enhancements

      Upgrade Requirement:
      Recommended - HP recommends users update to this version at their earliest convenience.

      Includes support for iLO 3


      Provided support for Integrated Lights-Outs 3 (iLO 3).

      New Script Added:
         - Clear_Power_On_Time.xml
         - Get_Power_On_Time.xml
         - Get_Pwreg_Alert_Threshold.xml
         - Lock_Configuration.xml
         - Mod_Network_Settings.xml
         - Set_Pwreg_Alert_Threshold.xml


      Version:2.40.0-1 (7 May 2009)
      Enhancements

      Added the following sample scripts:

      • Import_SSH_Key.xml
      • Get_Host_Pwr_Micro_Ver.xml

      Added the following configuration options to Mod_Global_Settings.xml:

      • KEY_UP_KEY_DOWN
      • CAPTURE_MANUAL_EXPORT

      Added the following option to Update_Firmware.xml

      • TPM_ENABLED

      Added the following option to Mod_Directory.xml

      • DIR_USER_CONTEXT_X

      where X can be from 4 to 15.


        Version:2.30.0-1 (19 Jun 2008)
        Enhancements

        Upgrade Requirement:
        Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


        Added the following sample scripts:

        • hponcfgcap.xml
        • hponcfg_reformat.xsl
        • vspconfig.pl
        • Mod_VSP_Flow_Control.xml

        Added the following configuration options to Mod_Global_Settings.xml:

        • VSP_SOFTWARE_FLOW_CONTROL
        • RAWVSP_PORT
        • RAW_SERIAL_PORT

        Added a documentation  for Mod_Directory.xml script.The documentation provides steps required to configure Directory Default Schema.

         


        Version:2.20.0-1 (26 Jul 2007)
        Enhancements

        Upgrade Requirement:
        Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


        New support for iLO 2 v1.30.

        Added following sample scripts:

        • Add_SSO_Rec.xml
        • Add_SSO_Settings.xml
        • Mod_SSO_Settings.xml
        • Add_SSO_Rec.xml
        • Delete_SSO_Rec.xml
        • Clear_IML.xml
        • Computer_Lock_Config.xml
        • Get_PowerCap.xml
        • Get_Server_Name.xml
        • Set_Server_Name.xml
        • Set_PowerCap.xml
        Added following commands to Mod_Global_Settings.xml:
        • ENFORCE_AES
        • AUTHENTICATION_FAILURE_LOGGINS
        • CONSOLE_CAPTURE_ENABLE
        • CONSOLE_CAPTURE_BOOT_BUFFER_ENABLE
        • CONSOLE_CAPTURE_FAULT_BUFFER_ENABLE
        • INTERACTIVE_CONSOLE_REPLAY_ENABLE
        • CONSOLE_CAPTURE_PORT
        • CAPTURE_AUTO_EXPORT_ENABLE
        • CAPTURE_AUTO_EXPORT_LOCATION
        • CAPTURE_AUTO_EXPORT_USERNAME
        • CAPTURE_AUTO_EXPORT_PASSWORD
        • SHARED_CONSOLE_ENABLE
        • SHARED_CONSOLE_PORT
        Added locfg.pl command line options "-u username" and "-p password".
      • Note: Use "-u" and "-p" with caution as comamnd line options are visible on Linux.

      • Version:2.10.0-1 (12 Jul 2006)
        Fixes

        Upgrade Requirement:
        Recommended - HPE recommends users update to this version at their earliest convenience.


        Fixed tag names for ILO 2 in Mod_VLAN.xml.

        Enhancements

        New support for iLO 2 v1.1x and v1.20.

        Added following sample scripts:

        • Copy_Virtual_Floppy.xml
        • Get_All_Cables_Status.xml
        • Get_EmHealth.xml
        • Get_Host_APO.xml
        • Get_Power_Readings.xml
        • Get_VPB_Cable_Status.xml
        • Set_Host_APO.xml

        Version:2.00.0-1 (2 Feb 2006)
        Fixes

        Upgrade Requirement:
        Recommended - HPE recommends users update to this version at their earliest convenience.


        Added sample script for set_host_power
        Updated get_ilo_log to not use RIB info mode write Fixes typos in scripts.

        Enhancements

        New support for iLO 2 v1.0x and RILOE-II v1.20.


        Version:1.80.0-1 (14 Jul 2005)
        Enhancements

        Upgrade Requirement:
        Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


        The following scripts have been added or modified to support additional firmware features available in 1.80:
        NEW SAMPLE SCRIPTS
        Mod_VLAN.xml
        Mod_Schemaless_Directory.xml
        Get_Host_Pwr_Reg_Info.xml
        Mod_2Factor.xml
        Import_2Factor_Certs.xml
        Get_2Factor.xml


        Version:1.70.0-1 (26 Mar 2005)
        Enhancements

        Upgrade Requirement:
        Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


        The following scripts have been added or modified to support additional firmware features available in 1.70:

          NEW SAMPLE SCRIPTS
          Get_Host_Power_Saver.xml
          Set_Host_Power_Saver.xml

        Version:1.64.0-1 (19 Nov 2004)
        Enhancements

        Upgrade Requirement:
        Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


        The following scripts have been added or modified to support additional firmware features available in 1.64:

        • Cert_Request.xml

        • Import_Cert.xml

        Version:1.60 (30 Jul 2004)
        Enhancements

        Upgrade Requirement:
        Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


        The following scripts have been added or modified to support additional firmware features available in 1.55 and 1.60:

        • NEW SAMPLE SCRIPTS
          Eject_Virtual_Media.xml
          Get_VM_Status.xml
          Insert_Virtual_Media.xml
          Set_VM_Status.xml
          Get_Host_Data.xml
          Shared_Network_Port.xml
          RBSU_POST_IP.xml
          Get_IML.xml
          Get_iLO_Log.xml
          Administrator_reset_pw.xml
          Get_Enc_Bay_IP_Settings.xml
          Mod_Network_Settings.xml
          Mod_Enc_Bay_IP_Settings.xml

        • NEW UTILITY
          The HPONCFG.EXE utility is now available, allowing you to use RIBCL scripts on line while running from the host.

          Requirements:

          • iLO 1.41 or later

          • RILOE II 1.13

          • the approprite lights-out driver

          HPONCFG passes the scripts to the local lights-out processor when running from an Administrator or root account on the host.

          You can use this utility to configure and operate lights-out without using the network connection. The utility accepts existing RIBCL scripts.


        Version:1.1 (23 Jan 2004)
        Enhancements
        Initial release.

        Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.