Printable version

Drivers & software

HPE SYNERGY SOFTWARE RELEASES: COMPOSER 4.00.10 and IMAGE STREAMER 4.00.06

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware (Entitlement Required)
Version: Comp4.00.10-ImgStmr4.00.06(28 Jun 2018)
Operating System(s): OS Independent
Welcome to the HPE Support Center page for the HPE Synergy Composer 4.00.10 and HPE Synergy Image Streamer 4.00.06 Management combination. Please open the IMPORTANT tab on this page to determine HPE Synergy Custom SPPs that are available for use with this HPE Synergy Management combination. This HPE Synergy Management combination provides General Data Production Regulation (GDPR) compliance for Personally Identifiable Information (PII) data at rest.

What’s New?

HPE Synergy Composer 4.00.10 – June 2018

  • Patch Release –no additional new enhancements

HPE Synergy Image Streamer 4.00.06 – June 2018 

  • Patch Release –no additional new enhancements

Note: Please check the ‘IMPORTANT’ tab for instructions on determining VMWare support for HPE Synergy Custom SPPs.

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant..

  •  
  • HPE Smart Array E208i-p SR/ P408i-c SR/  P204i-c SR/ P416ie-m SR Gen10 Controllers
  • Integrated Lights-Out 4 (iLO 4)  and Integrated Lights-Out 5 (iLO 5)
  • HPE Synergy 2820C 10Gb  and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers
  • HDD FW
  • HPE VC SE 40Gb F8 Module

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

HPE Synergy Custom SPP 2018.03.20180628 – June 2018
Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this HPE Synergy Synergy Custom SPP 2018.03.20180628:
    • HPE Custom Image for VMware ESXi 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE HPE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

For a complete list of supported HPE Synergy Custom SPPs, please see the “Important” or “Release Notes “tabs.

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

be0bac3f9ae31af309f4aec9f2b6d399664e7a9445bf04102bf1a141234ccae3 ICM-SynergySWComposer4.00.10-ImageStreamer4.00.06.txt

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

For HPE Synergy Composer and Image Streamer Upgrade Paths:

www.hpe.com/info/synergy-fw-upgrade-table

 

HPE Synergy Firmware Comparison Tool:

To compare the contents of HPE Synergy Custom SPPs, please visit:

http://h22208.www2.hpe.com/eginfolib/synergy/software_release_comparison_tool/index.html

 

VMware Support for HPE Synergy Software Releases:

For VMware support:

https://www.vmware.com/resources/compatibility/search.php

 

For VMWare vSAN support:

https://www.vmware.com/resources/compatibility/search.php?deviceCategory=vsan
 

Complex Programmable Logic Device (CPLD) update:
Using this HPE Synergy Management combination, Complex Programmable Logic Device (CPLD) updates may now be applied without execution of a profile-reapply. Please see Customer Advisory:
 

HPE Synergy Custom SPP 2018.03.20180928 and 2018.03.20180628 ESXi driver installation:

For installation of ESXi 6.0 and 6.5 drivers into the HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018, HPE Custom Image for VMware ESXi 6.7, and HPE Custom Image for VMware ESXi 6.5 U2 May 2018, please refer to the following Customer Advisory, as these drivers are contained in the 2018.03.20180628 HPE Synergy Custom SPP.

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
    • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported
       

See HPE Synergy product documentation

Reference “Best Practices for HPE Synergy Firmware and Driver Updates”


End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

The HPE Synergy Composer 4.00.10 and HPE Synergy Image Streamer 4.00.06 Management combination provides only fixes and no new features. 

The following HPE Synergy Custom SPPs are supported with the HPE Synergy Composer 4.00.09 and HPE Synergy Image Streamer 4.00.06 Synergy Management combination:

For HPE Synergy Composer and Image Streamer Upgrade Paths:

www.hpe.com/info/synergy-fw-upgrade-table

 

HPE Synergy Firmware Comparison Tool

To compare the contents of HPE Synergy Custom SPPs, please visit:

http://h22208.www2.hpe.com/eginfolib/synergy/software_release_comparison_tool/index.html

 

VMware Support for HPE Synergy Software Releases

For VMware support:

https://www.vmware.com/resources/compatibility/search.php

For VMWare vSAN support:

https://www.vmware.com/resources/compatibility/search.php?deviceCategory=vsan
 

Complex Programmable Logic Device (CPLD) updates
Using this HPE Synergy Management combination, Complex Programmable Logic Device (CPLD) updates may now be applied without execution of a profile-reapply. Please see Customer Advisory:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045812en_us
 

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant..

  •  
  • HPE Smart Array E208i-p SR/ P408i-c SR/  P204i-c SR/ P416ie-m SR Gen10 Controllers
  • Integrated Lights-Out 4 (iLO 4)  and Integrated Lights-Out 5 (iLO 5)
  • HPE Synergy 2820C 10Gb and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers
  • HDD FW
  • HPE VC SE 40Gb F8 Module

 

This HPE Synergy Custom SPP is supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

HPE Synergy Custom SPP 2018.03.20180928 Contents

HPE Synergy Custom SPP Version 2018.03.20180928
REPORTED AS HPE Synergy Custom SPP 2018 03 2018 09 28
System ROM HPE Synergy 480 Gen9 I37 2.60 05/21/2018
System ROM HPE Synergy 660 Gen9 I39 2.60 05/21/2018
System ROM HPE Synergy 620/680  I40 2.60 05/23/2018
System ROM HPE Synergy 660 Gen10 I43 1.36 02/14/2018
System ROM HPE Synergy 480 Gen10 I42 1.36 02/14/2018
Frame Link Module 2.02.03

HPE Smart Array E208i-p SR Gen10 Controller

HPE Smart Array P408i-c SR Gen10 Controller

HPE Smart Array P204i-c SR Gen10 Controller

HPE Smart Array P416ie-m SR Gen10 Controller
1.6

HPE H240nr Smart Host Bus Adapter      

HPE Smart Array P240nr Controller

HPE Smart Array P542D Controller
6.3
HPE Synergy 3820C 20Gb Converged Network Adapter 7.15.97 
ESXi HPE Synergy 3820C 20Gb Converged Network Adapter Driver ESXi6.0 : 2.713.60.v60.2
ESXi6.5 : 1.0.60.3-1OEM.650.0.0.4598673
HPE Synergy 2820C 10Gb Converged Network Adapter 7.15.97 
ESXi HPE Synergy 2820C 20Gb Converged Network Adapter Driver ESXi6.0 : 2.713.60.v60.2
ESXi6.5 : 1.0.60.3-1OEM.650.0.0.4598673
HPE Synergy 3830 16G Fibre Channel Host Bus Adapter 6.01.50
HPE Synergy 3530 C 16G Fibre Channel Host Bus Adapter 11.4.225.21
Gen9 Power PIC  1.0.9
Integrated Lights-Out 4 (iLO 4) 2.60 May 23 2018
Integrated Lights-Out 5 (iLO 5) 1.30 May 31 2018
Gen10 Power PIC 1.0.4
IP (Gen10) 3.10 Build 189
HPIP (Gen9) 2.61 Build 11
HPE VC SE 40Gb F8 Module 1.2.3.1
HPE VC SE 16Gb FC Module 4.00.33
HPE Synergy 12Gb SAS Connection Module 1.2.4.0
HPE Synergy D3940 Storage Module 2.07
HPE Synergy 20Gb Interconnect Link Module 1.08
HPE Synergy 10Gb Interconnect Link Module 1.08
HPE Synergy 10Gb Pass Thru Module 1.15

HPE Synergy Custom SPP 2018.03.20180628 – June 2018
Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this HPE Synergy Synergy Custom SPP 2018.03.20180628:
    • HPE Custom Image for VMware ESXi 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE HPE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported
       

HPE Synergy Custom SPP 2017.10.20180324 – March 2018
HPE Synergy Custom SPP built on 2017.10.20171215SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20180323 – March 2018
HPE Synergy Custom SPP built on HPE Synergy Custom SPP 2017.10.20171206SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20171215SROM – March 2018
2017.10.20180324 provides the latest hot fixes for this SPP version instead of 2017.10.20171215SROM.

HPE Synergy Custom SPP 2017.10.20171206SROM – March 2018
2017.10.20180323 provides the latest hot fixes for this SPP version instead of 2017.10.20171206SROM.

HPE Synergy Custom SPP 2017.10.20171215 – December 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171206 – December 2017
 Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171108 – November 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170920 – September 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170721-- July 2017
Supported for upgrade purposes only


Notes:

HPE Synergy Composer 4.00.10 – June 2018
           
HPE Synergy Composer 4.00.10 Release Notes: https://support.hpe.com/hpsc/doc/public/display?docId=a00048453en_us

HPE Synergy Image Streamer 4.00.06 – June 2018

HPE Synergy 4.00.06 Release Notes
https://support.hpe.com/hpsc/doc/public/display?docId=a00047062en_us

Note: Please check the ‘IMPORTANT’ tab for instructions on determining VMWare support for HPE Synergy Custom SPPs.

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

 

HPE Synergy Custom SPP 2018.03.20180628 – June 2018
Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Custom Image for VMware ESXi Image 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported
  • Frame Link Module 2.02.03
    Firmware 2.02.03 update release delivers fixes for:
    • Customer Advisory:
      HPE Synergy - Certain ToR Switches With LLDP Traffic May Cause Instability of the Synergy Frame Link Module:
      https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00039981en_us
    • The Frame Link Module would incorrectly respond to ARP requests for 192.168.10.1
    • Several security issues were addressed.
    • Fixed an issue where, in very rare cases, unexpected delays in the initialization of a frame link module (FLM) during the update of FLM firmware could cause the loss of HPE Synergy Image Streamer redundancy.  When this issue occurs the health status of HPE Synergy Image Streamers is degraded which can prevent the successful firmware update of other frame link modules in the affected Logical Enclosure (LE).  Although extremely unlikely, this can also potentially result in compute module(s) in the affected LE losing access to their boot Imagebeing hosted by the impacted HPE Synergy Image Streamers.                                

HPE Synergy Custom SPP 2017.10.20180324 – March 2018
HPE Synergy Custom SPP built on 2017.10.20171215SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20180323 – March 2018
HPE Synergy Custom SPP built on HPE Synergy Custom SPP 2017.10.20171206SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20171215SROM – March 2018
2017.10.20180324 provides the latest hot fixes for this SPP version instead of 2017.10.20171215SROM.

HPE Synergy Custom SPP 2017.10.20171206SROM – March 2018
2017.10.20180323 provides the latest hot fixes for this SPP version instead of 2017.10.20171206SROM.

HPE Synergy Custom SPP 2017.10.20171215 – December 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171206 – December 2017
 Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171108 – November 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170920 – September 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170721-- July 2017
Supported for upgrade purposes only


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


HPE Synergy Composer 4.00.10 – June 2018

For a complete set of Fixes in this patch release, please reference:

https://support.hpe.com/hpsc/doc/public/display?docId=a00048453en_us 

HPE Synergy Image Streamer 4.00.06 – June 2018 

For a complete set of Fixes in this patch release, please reference:
https://support.hpe.com/hpsc/doc/public/display?docId=a00047062en_us     

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018  HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

 

HPE Synergy Custom SPP 2018.03.20180628 – June 2018       

 Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Custom Image for VMware ESXi Image 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

The HPE Synergy Composer 4.00.10 and HPE Synergy Image Streamer 4.00.06 Management combination provides only fixes and no new features. 

The following HPE Synergy Custom SPPs are supported with the HPE Synergy Composer 4.00.09 and HPE Synergy Image Streamer 4.00.06 Synergy Management combination:

For HPE Synergy Composer and Image Streamer Upgrade Paths:

www.hpe.com/info/synergy-fw-upgrade-table

 

HPE Synergy Firmware Comparison Tool

To compare the contents of HPE Synergy Custom SPPs, please visit:

http://h22208.www2.hpe.com/eginfolib/synergy/software_release_comparison_tool/index.html

 

VMware Support for HPE Synergy Software Releases

For VMware support:

https://www.vmware.com/resources/compatibility/search.php

For VMWare vSAN support:

https://www.vmware.com/resources/compatibility/search.php?deviceCategory=vsan
 

Complex Programmable Logic Device (CPLD) updates
Using this HPE Synergy Management combination, Complex Programmable Logic Device (CPLD) updates may now be applied without execution of a profile-reapply. Please see Customer Advisory:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045812en_us
 

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant..

  •  
  • HPE Smart Array E208i-p SR/ P408i-c SR/  P204i-c SR/ P416ie-m SR Gen10 Controllers
  • Integrated Lights-Out 4 (iLO 4)  and Integrated Lights-Out 5 (iLO 5)
  • HPE Synergy 2820C 10Gb and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers
  • HDD FW
  • HPE VC SE 40Gb F8 Module

 

This HPE Synergy Custom SPP is supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

HPE Synergy Custom SPP 2018.03.20180928 Contents

HPE Synergy Custom SPP Version 2018.03.20180928
REPORTED AS HPE Synergy Custom SPP 2018 03 2018 09 28
System ROM HPE Synergy 480 Gen9 I37 2.60 05/21/2018
System ROM HPE Synergy 660 Gen9 I39 2.60 05/21/2018
System ROM HPE Synergy 620/680  I40 2.60 05/23/2018
System ROM HPE Synergy 660 Gen10 I43 1.36 02/14/2018
System ROM HPE Synergy 480 Gen10 I42 1.36 02/14/2018
Frame Link Module 2.02.03

HPE Smart Array E208i-p SR Gen10 Controller

HPE Smart Array P408i-c SR Gen10 Controller

HPE Smart Array P204i-c SR Gen10 Controller

HPE Smart Array P416ie-m SR Gen10 Controller
1.6

HPE H240nr Smart Host Bus Adapter      

HPE Smart Array P240nr Controller

HPE Smart Array P542D Controller
6.3
HPE Synergy 3820C 20Gb Converged Network Adapter 7.15.97 
ESXi HPE Synergy 3820C 20Gb Converged Network Adapter Driver ESXi6.0 : 2.713.60.v60.2
ESXi6.5 : 1.0.60.3-1OEM.650.0.0.4598673
HPE Synergy 2820C 10Gb Converged Network Adapter 7.15.97 
ESXi HPE Synergy 2820C 20Gb Converged Network Adapter Driver ESXi6.0 : 2.713.60.v60.2
ESXi6.5 : 1.0.60.3-1OEM.650.0.0.4598673
HPE Synergy 3830 16G Fibre Channel Host Bus Adapter 6.01.50
HPE Synergy 3530 C 16G Fibre Channel Host Bus Adapter 11.4.225.21
Gen9 Power PIC  1.0.9
Integrated Lights-Out 4 (iLO 4) 2.60 May 23 2018
Integrated Lights-Out 5 (iLO 5) 1.30 May 31 2018
Gen10 Power PIC 1.0.4
IP (Gen10) 3.10 Build 189
HPIP (Gen9) 2.61 Build 11
HPE VC SE 40Gb F8 Module 1.2.3.1
HPE VC SE 16Gb FC Module 4.00.33
HPE Synergy 12Gb SAS Connection Module 1.2.4.0
HPE Synergy D3940 Storage Module 2.07
HPE Synergy 20Gb Interconnect Link Module 1.08
HPE Synergy 10Gb Interconnect Link Module 1.08
HPE Synergy 10Gb Pass Thru Module 1.15

HPE Synergy Custom SPP 2018.03.20180628 – June 2018
Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this HPE Synergy Synergy Custom SPP 2018.03.20180628:
    • HPE Custom Image for VMware ESXi 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE HPE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported
       

HPE Synergy Custom SPP 2017.10.20180324 – March 2018
HPE Synergy Custom SPP built on 2017.10.20171215SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20180323 – March 2018
HPE Synergy Custom SPP built on HPE Synergy Custom SPP 2017.10.20171206SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20171215SROM – March 2018
2017.10.20180324 provides the latest hot fixes for this SPP version instead of 2017.10.20171215SROM.

HPE Synergy Custom SPP 2017.10.20171206SROM – March 2018
2017.10.20180323 provides the latest hot fixes for this SPP version instead of 2017.10.20171206SROM.

HPE Synergy Custom SPP 2017.10.20171215 – December 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171206 – December 2017
 Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171108 – November 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170920 – September 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170721-- July 2017
Supported for upgrade purposes only

Version:Comp4.00.10-ImgStmr4.00.06 (28 Jun 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


HPE Synergy Composer 4.00.10 – June 2018

For a complete set of Fixes in this patch release, please reference:

https://support.hpe.com/hpsc/doc/public/display?docId=a00048453en_us 

HPE Synergy Image Streamer 4.00.06 – June 2018 

For a complete set of Fixes in this patch release, please reference:
https://support.hpe.com/hpsc/doc/public/display?docId=a00047062en_us     

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018  HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

 

HPE Synergy Custom SPP 2018.03.20180628 – June 2018       

 Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Custom Image for VMware ESXi Image 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported
Enhancements

What’s New?

HPE Synergy Composer 4.00.10 – June 2018

  • Patch Release –no additional new enhancements

HPE Synergy Image Streamer 4.00.06 – June 2018 

  • Patch Release –no additional new enhancements

Note: Please check the ‘IMPORTANT’ tab for instructions on determining VMWare support for HPE Synergy Custom SPPs.

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant..

  •  
  • HPE Smart Array E208i-p SR/ P408i-c SR/  P204i-c SR/ P416ie-m SR Gen10 Controllers
  • Integrated Lights-Out 4 (iLO 4)  and Integrated Lights-Out 5 (iLO 5)
  • HPE Synergy 2820C 10Gb  and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers
  • HDD FW
  • HPE VC SE 40Gb F8 Module

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

HPE Synergy Custom SPP 2018.03.20180628 – June 2018
Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this HPE Synergy Synergy Custom SPP 2018.03.20180628:
    • HPE Custom Image for VMware ESXi 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE HPE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

For a complete list of supported HPE Synergy Custom SPPs, please see the “Important” or “Release Notes “tabs.


Type: Firmware (Entitlement Required)
Version: Comp4.00.10-ImgStmr4.00.06(28 Jun 2018)
Operating System(s):
OS Independent

Description

Welcome to the HPE Support Center page for the HPE Synergy Composer 4.00.10 and HPE Synergy Image Streamer 4.00.06 Management combination. Please open the IMPORTANT tab on this page to determine HPE Synergy Custom SPPs that are available for use with this HPE Synergy Management combination. This HPE Synergy Management combination provides General Data Production Regulation (GDPR) compliance for Personally Identifiable Information (PII) data at rest.

Enhancements

What’s New?

HPE Synergy Composer 4.00.10 – June 2018

  • Patch Release –no additional new enhancements

HPE Synergy Image Streamer 4.00.06 – June 2018 

  • Patch Release –no additional new enhancements

Note: Please check the ‘IMPORTANT’ tab for instructions on determining VMWare support for HPE Synergy Custom SPPs.

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant..

  •  
  • HPE Smart Array E208i-p SR/ P408i-c SR/  P204i-c SR/ P416ie-m SR Gen10 Controllers
  • Integrated Lights-Out 4 (iLO 4)  and Integrated Lights-Out 5 (iLO 5)
  • HPE Synergy 2820C 10Gb  and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers
  • HDD FW
  • HPE VC SE 40Gb F8 Module

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

HPE Synergy Custom SPP 2018.03.20180628 – June 2018
Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this HPE Synergy Synergy Custom SPP 2018.03.20180628:
    • HPE Custom Image for VMware ESXi 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE HPE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

For a complete list of supported HPE Synergy Custom SPPs, please see the “Important” or “Release Notes “tabs.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

be0bac3f9ae31af309f4aec9f2b6d399664e7a9445bf04102bf1a141234ccae3 ICM-SynergySWComposer4.00.10-ImageStreamer4.00.06.txt

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

For HPE Synergy Composer and Image Streamer Upgrade Paths:

www.hpe.com/info/synergy-fw-upgrade-table

 

HPE Synergy Firmware Comparison Tool:

To compare the contents of HPE Synergy Custom SPPs, please visit:

http://h22208.www2.hpe.com/eginfolib/synergy/software_release_comparison_tool/index.html

 

VMware Support for HPE Synergy Software Releases:

For VMware support:

https://www.vmware.com/resources/compatibility/search.php

 

For VMWare vSAN support:

https://www.vmware.com/resources/compatibility/search.php?deviceCategory=vsan
 

Complex Programmable Logic Device (CPLD) update:
Using this HPE Synergy Management combination, Complex Programmable Logic Device (CPLD) updates may now be applied without execution of a profile-reapply. Please see Customer Advisory:
 

HPE Synergy Custom SPP 2018.03.20180928 and 2018.03.20180628 ESXi driver installation:

For installation of ESXi 6.0 and 6.5 drivers into the HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018, HPE Custom Image for VMware ESXi 6.7, and HPE Custom Image for VMware ESXi 6.5 U2 May 2018, please refer to the following Customer Advisory, as these drivers are contained in the 2018.03.20180628 HPE Synergy Custom SPP.

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
    • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported
       

See HPE Synergy product documentation

Reference “Best Practices for HPE Synergy Firmware and Driver Updates”


Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

The HPE Synergy Composer 4.00.10 and HPE Synergy Image Streamer 4.00.06 Management combination provides only fixes and no new features. 

The following HPE Synergy Custom SPPs are supported with the HPE Synergy Composer 4.00.09 and HPE Synergy Image Streamer 4.00.06 Synergy Management combination:

For HPE Synergy Composer and Image Streamer Upgrade Paths:

www.hpe.com/info/synergy-fw-upgrade-table

 

HPE Synergy Firmware Comparison Tool

To compare the contents of HPE Synergy Custom SPPs, please visit:

http://h22208.www2.hpe.com/eginfolib/synergy/software_release_comparison_tool/index.html

 

VMware Support for HPE Synergy Software Releases

For VMware support:

https://www.vmware.com/resources/compatibility/search.php

For VMWare vSAN support:

https://www.vmware.com/resources/compatibility/search.php?deviceCategory=vsan
 

Complex Programmable Logic Device (CPLD) updates
Using this HPE Synergy Management combination, Complex Programmable Logic Device (CPLD) updates may now be applied without execution of a profile-reapply. Please see Customer Advisory:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045812en_us
 

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant..

  •  
  • HPE Smart Array E208i-p SR/ P408i-c SR/  P204i-c SR/ P416ie-m SR Gen10 Controllers
  • Integrated Lights-Out 4 (iLO 4)  and Integrated Lights-Out 5 (iLO 5)
  • HPE Synergy 2820C 10Gb and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers
  • HDD FW
  • HPE VC SE 40Gb F8 Module

 

This HPE Synergy Custom SPP is supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

HPE Synergy Custom SPP 2018.03.20180928 Contents

HPE Synergy Custom SPP Version 2018.03.20180928
REPORTED AS HPE Synergy Custom SPP 2018 03 2018 09 28
System ROM HPE Synergy 480 Gen9 I37 2.60 05/21/2018
System ROM HPE Synergy 660 Gen9 I39 2.60 05/21/2018
System ROM HPE Synergy 620/680  I40 2.60 05/23/2018
System ROM HPE Synergy 660 Gen10 I43 1.36 02/14/2018
System ROM HPE Synergy 480 Gen10 I42 1.36 02/14/2018
Frame Link Module 2.02.03

HPE Smart Array E208i-p SR Gen10 Controller

HPE Smart Array P408i-c SR Gen10 Controller

HPE Smart Array P204i-c SR Gen10 Controller

HPE Smart Array P416ie-m SR Gen10 Controller
1.6

HPE H240nr Smart Host Bus Adapter      

HPE Smart Array P240nr Controller

HPE Smart Array P542D Controller
6.3
HPE Synergy 3820C 20Gb Converged Network Adapter 7.15.97 
ESXi HPE Synergy 3820C 20Gb Converged Network Adapter Driver ESXi6.0 : 2.713.60.v60.2
ESXi6.5 : 1.0.60.3-1OEM.650.0.0.4598673
HPE Synergy 2820C 10Gb Converged Network Adapter 7.15.97 
ESXi HPE Synergy 2820C 20Gb Converged Network Adapter Driver ESXi6.0 : 2.713.60.v60.2
ESXi6.5 : 1.0.60.3-1OEM.650.0.0.4598673
HPE Synergy 3830 16G Fibre Channel Host Bus Adapter 6.01.50
HPE Synergy 3530 C 16G Fibre Channel Host Bus Adapter 11.4.225.21
Gen9 Power PIC  1.0.9
Integrated Lights-Out 4 (iLO 4) 2.60 May 23 2018
Integrated Lights-Out 5 (iLO 5) 1.30 May 31 2018
Gen10 Power PIC 1.0.4
IP (Gen10) 3.10 Build 189
HPIP (Gen9) 2.61 Build 11
HPE VC SE 40Gb F8 Module 1.2.3.1
HPE VC SE 16Gb FC Module 4.00.33
HPE Synergy 12Gb SAS Connection Module 1.2.4.0
HPE Synergy D3940 Storage Module 2.07
HPE Synergy 20Gb Interconnect Link Module 1.08
HPE Synergy 10Gb Interconnect Link Module 1.08
HPE Synergy 10Gb Pass Thru Module 1.15

HPE Synergy Custom SPP 2018.03.20180628 – June 2018
Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this HPE Synergy Synergy Custom SPP 2018.03.20180628:
    • HPE Custom Image for VMware ESXi 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE HPE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported
       

HPE Synergy Custom SPP 2017.10.20180324 – March 2018
HPE Synergy Custom SPP built on 2017.10.20171215SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20180323 – March 2018
HPE Synergy Custom SPP built on HPE Synergy Custom SPP 2017.10.20171206SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20171215SROM – March 2018
2017.10.20180324 provides the latest hot fixes for this SPP version instead of 2017.10.20171215SROM.

HPE Synergy Custom SPP 2017.10.20171206SROM – March 2018
2017.10.20180323 provides the latest hot fixes for this SPP version instead of 2017.10.20171206SROM.

HPE Synergy Custom SPP 2017.10.20171215 – December 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171206 – December 2017
 Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171108 – November 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170920 – September 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170721-- July 2017
Supported for upgrade purposes only


Notes:

HPE Synergy Composer 4.00.10 – June 2018
           
HPE Synergy Composer 4.00.10 Release Notes: https://support.hpe.com/hpsc/doc/public/display?docId=a00048453en_us

HPE Synergy Image Streamer 4.00.06 – June 2018

HPE Synergy 4.00.06 Release Notes
https://support.hpe.com/hpsc/doc/public/display?docId=a00047062en_us

Note: Please check the ‘IMPORTANT’ tab for instructions on determining VMWare support for HPE Synergy Custom SPPs.

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

 

HPE Synergy Custom SPP 2018.03.20180628 – June 2018
Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Custom Image for VMware ESXi Image 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported
  • Frame Link Module 2.02.03
    Firmware 2.02.03 update release delivers fixes for:
    • Customer Advisory:
      HPE Synergy - Certain ToR Switches With LLDP Traffic May Cause Instability of the Synergy Frame Link Module:
      https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00039981en_us
    • The Frame Link Module would incorrectly respond to ARP requests for 192.168.10.1
    • Several security issues were addressed.
    • Fixed an issue where, in very rare cases, unexpected delays in the initialization of a frame link module (FLM) during the update of FLM firmware could cause the loss of HPE Synergy Image Streamer redundancy.  When this issue occurs the health status of HPE Synergy Image Streamers is degraded which can prevent the successful firmware update of other frame link modules in the affected Logical Enclosure (LE).  Although extremely unlikely, this can also potentially result in compute module(s) in the affected LE losing access to their boot Imagebeing hosted by the impacted HPE Synergy Image Streamers.                                

HPE Synergy Custom SPP 2017.10.20180324 – March 2018
HPE Synergy Custom SPP built on 2017.10.20171215SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20180323 – March 2018
HPE Synergy Custom SPP built on HPE Synergy Custom SPP 2017.10.20171206SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20171215SROM – March 2018
2017.10.20180324 provides the latest hot fixes for this SPP version instead of 2017.10.20171215SROM.

HPE Synergy Custom SPP 2017.10.20171206SROM – March 2018
2017.10.20180323 provides the latest hot fixes for this SPP version instead of 2017.10.20171206SROM.

HPE Synergy Custom SPP 2017.10.20171215 – December 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171206 – December 2017
 Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171108 – November 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170920 – September 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170721-- July 2017
Supported for upgrade purposes only


Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


HPE Synergy Composer 4.00.10 – June 2018

For a complete set of Fixes in this patch release, please reference:

https://support.hpe.com/hpsc/doc/public/display?docId=a00048453en_us 

HPE Synergy Image Streamer 4.00.06 – June 2018 

For a complete set of Fixes in this patch release, please reference:
https://support.hpe.com/hpsc/doc/public/display?docId=a00047062en_us     

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018  HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

 

HPE Synergy Custom SPP 2018.03.20180628 – June 2018       

 Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Custom Image for VMware ESXi Image 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

Important

The HPE Synergy Composer 4.00.10 and HPE Synergy Image Streamer 4.00.06 Management combination provides only fixes and no new features. 

The following HPE Synergy Custom SPPs are supported with the HPE Synergy Composer 4.00.09 and HPE Synergy Image Streamer 4.00.06 Synergy Management combination:

For HPE Synergy Composer and Image Streamer Upgrade Paths:

www.hpe.com/info/synergy-fw-upgrade-table

 

HPE Synergy Firmware Comparison Tool

To compare the contents of HPE Synergy Custom SPPs, please visit:

http://h22208.www2.hpe.com/eginfolib/synergy/software_release_comparison_tool/index.html

 

VMware Support for HPE Synergy Software Releases

For VMware support:

https://www.vmware.com/resources/compatibility/search.php

For VMWare vSAN support:

https://www.vmware.com/resources/compatibility/search.php?deviceCategory=vsan
 

Complex Programmable Logic Device (CPLD) updates
Using this HPE Synergy Management combination, Complex Programmable Logic Device (CPLD) updates may now be applied without execution of a profile-reapply. Please see Customer Advisory:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045812en_us
 

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant..

  •  
  • HPE Smart Array E208i-p SR/ P408i-c SR/  P204i-c SR/ P416ie-m SR Gen10 Controllers
  • Integrated Lights-Out 4 (iLO 4)  and Integrated Lights-Out 5 (iLO 5)
  • HPE Synergy 2820C 10Gb and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers
  • HDD FW
  • HPE VC SE 40Gb F8 Module

 

This HPE Synergy Custom SPP is supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

HPE Synergy Custom SPP 2018.03.20180928 Contents

HPE Synergy Custom SPP Version 2018.03.20180928
REPORTED AS HPE Synergy Custom SPP 2018 03 2018 09 28
System ROM HPE Synergy 480 Gen9 I37 2.60 05/21/2018
System ROM HPE Synergy 660 Gen9 I39 2.60 05/21/2018
System ROM HPE Synergy 620/680  I40 2.60 05/23/2018
System ROM HPE Synergy 660 Gen10 I43 1.36 02/14/2018
System ROM HPE Synergy 480 Gen10 I42 1.36 02/14/2018
Frame Link Module 2.02.03

HPE Smart Array E208i-p SR Gen10 Controller

HPE Smart Array P408i-c SR Gen10 Controller

HPE Smart Array P204i-c SR Gen10 Controller

HPE Smart Array P416ie-m SR Gen10 Controller
1.6

HPE H240nr Smart Host Bus Adapter      

HPE Smart Array P240nr Controller

HPE Smart Array P542D Controller
6.3
HPE Synergy 3820C 20Gb Converged Network Adapter 7.15.97 
ESXi HPE Synergy 3820C 20Gb Converged Network Adapter Driver ESXi6.0 : 2.713.60.v60.2
ESXi6.5 : 1.0.60.3-1OEM.650.0.0.4598673
HPE Synergy 2820C 10Gb Converged Network Adapter 7.15.97 
ESXi HPE Synergy 2820C 20Gb Converged Network Adapter Driver ESXi6.0 : 2.713.60.v60.2
ESXi6.5 : 1.0.60.3-1OEM.650.0.0.4598673
HPE Synergy 3830 16G Fibre Channel Host Bus Adapter 6.01.50
HPE Synergy 3530 C 16G Fibre Channel Host Bus Adapter 11.4.225.21
Gen9 Power PIC  1.0.9
Integrated Lights-Out 4 (iLO 4) 2.60 May 23 2018
Integrated Lights-Out 5 (iLO 5) 1.30 May 31 2018
Gen10 Power PIC 1.0.4
IP (Gen10) 3.10 Build 189
HPIP (Gen9) 2.61 Build 11
HPE VC SE 40Gb F8 Module 1.2.3.1
HPE VC SE 16Gb FC Module 4.00.33
HPE Synergy 12Gb SAS Connection Module 1.2.4.0
HPE Synergy D3940 Storage Module 2.07
HPE Synergy 20Gb Interconnect Link Module 1.08
HPE Synergy 10Gb Interconnect Link Module 1.08
HPE Synergy 10Gb Pass Thru Module 1.15

HPE Synergy Custom SPP 2018.03.20180628 – June 2018
Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this HPE Synergy Synergy Custom SPP 2018.03.20180628:
    • HPE Custom Image for VMware ESXi 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE HPE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported
       

HPE Synergy Custom SPP 2017.10.20180324 – March 2018
HPE Synergy Custom SPP built on 2017.10.20171215SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20180323 – March 2018
HPE Synergy Custom SPP built on HPE Synergy Custom SPP 2017.10.20171206SROM, delivering security fixes for Spectre/Meltdown vulnerabilities.

HPE Synergy Custom SPP 2017.10.20171215SROM – March 2018
2017.10.20180324 provides the latest hot fixes for this SPP version instead of 2017.10.20171215SROM.

HPE Synergy Custom SPP 2017.10.20171206SROM – March 2018
2017.10.20180323 provides the latest hot fixes for this SPP version instead of 2017.10.20171206SROM.

HPE Synergy Custom SPP 2017.10.20171215 – December 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171206 – December 2017
 Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.10.20171108 – November 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170920 – September 2017
Supported for upgrade purposes only

HPE Synergy Custom SPP 2017.07.20170721-- July 2017
Supported for upgrade purposes only

Revision History

Version:Comp4.00.10-ImgStmr4.00.06 (28 Jun 2018)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


HPE Synergy Composer 4.00.10 – June 2018

For a complete set of Fixes in this patch release, please reference:

https://support.hpe.com/hpsc/doc/public/display?docId=a00048453en_us 

HPE Synergy Image Streamer 4.00.06 – June 2018 

For a complete set of Fixes in this patch release, please reference:
https://support.hpe.com/hpsc/doc/public/display?docId=a00047062en_us     

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018  HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

 

HPE Synergy Custom SPP 2018.03.20180628 – June 2018       

 Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Custom Image for VMware ESXi Image 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported
Enhancements

What’s New?

HPE Synergy Composer 4.00.10 – June 2018

  • Patch Release –no additional new enhancements

HPE Synergy Image Streamer 4.00.06 – June 2018 

  • Patch Release –no additional new enhancements

Note: Please check the ‘IMPORTANT’ tab for instructions on determining VMWare support for HPE Synergy Custom SPPs.

HPE Synergy Custom SPP 2018.03.20180928– Oct 2018
HPE Synergy Custom SPP 2018.03.20180928 provides the latest hot fixes for Synergy firmware components and is based on the 2018.03 core Service Pack for ProLiant..

  •  
  • HPE Smart Array E208i-p SR/ P408i-c SR/  P204i-c SR/ P416ie-m SR Gen10 Controllers
  • Integrated Lights-Out 4 (iLO 4)  and Integrated Lights-Out 5 (iLO 5)
  • HPE Synergy 2820C 10Gb  and HPE Synergy 3820C 10/20Gb Converged Network Adapter VMware drivers
  • HDD FW
  • HPE VC SE 40Gb F8 Module

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this Synergy Software Release:
    • HPE Customized ESXi Image vSphere 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

HPE Synergy Custom SPP 2018.03.20180628 – June 2018
Replaces HPE Synergy Custom SPP 2018.03.20180508 to address FLM and HPE Synergy Image Streamer upgrade issues and latest security vulnerabilities for Gen9 compute modules.

This HPE Synergy Custom SPP is based on the 2018.03 core SPP and supports HPE Custom Image for VMware ESXi 6.5 U2 May 2018, HPE Custom Image for VMware ESXi 6.7 April 2018, HPE Custom Image for VMware ESXi 6.5 U1 Feb 2018 and HPE Custom Image for VMware ESXi 6.0 U3 Feb 2018.

Refer to the following advisory for VMware Driver Installation:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045994en_us

  • VMware 6.7 Limitations for this HPE Synergy Synergy Custom SPP 2018.03.20180628:
    • HPE Custom Image for VMware ESXi 6.7 does not include Fibre Channel over Ethernet (FCoE) support.
      • When deployed, compute connectivity to FC storage via HPE  VC SE HPE Synergy 40GB F8 Module is not supported
    • HPE Synergy Image Streamer is not supported

For a complete list of supported HPE Synergy Custom SPPs, please see the “Important” or “Release Notes “tabs.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.