Printable version

Drivers & software

* RECOMMENDED * Firmware Flash Component for Linux - HP P2000/MSA2000 450GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive (ST3450857SS)

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - SAS Storage Disk
Version: 0008(6 Sep 2011)
Operating System(s): Red Hat Enterprise Linux 4 (AMD64/EM64T)
Red Hat Enterprise Linux 4 (Itanium)
Red Hat Enterprise Linux 4 (x86)
Red Hat Enterprise Linux 5 Server (Itanium)
Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (Itanium)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (Itanium)
SUSE Linux Enterprise Server 11 (x86)
File name: CP015812.scexe (4.8 MB)
This Linux Smart Component contains a firmware update for the LFF hard drive model ST3450857SS (450GB 15K SAS 6G) in HP StorageWorks P2000 G3 MSA and MSA2000 G2 configurations.

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.


To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

2ea30a6cce02cfadd0d6f01b6445cfe7b8f181de65bc57ead67e8b749af14121 CP015812.scexe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

  1. Place the downloaded firmware package in a temporary directory.

  2. Open a Linux command console.

  3. From the directory containing the downloaded file, enable execute access to this module by entering chmod +x CPxxxxxx.scexe, where CPxxxxxx.scexe represents the downloaded file.

  4. Execute the Smart Component by entering a command similar to the following: ./CPxxxxxx.scexe --target <ip_address> --user <username> --passwd <password>

  5. Follow onscreen instructions.

NOTE:
  • Use the -e or -f option when flashing a device, even if it is up to date.

  • Use the -g option when downgrading.

  • For details on supported command options, see the online help by executing the command ./CPxxxxxx.scexe or ./CPxxxxxx.scexe -h.

  • If the user name or password contains an exclamation mark (!), enclose the string in single quotes or enter a backslash (\) before the exclamation point. For example, ’!manage’ or \!manage


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.


Supported Devices and Features:
Firmware on the listed drives can be updated when attached to any P2000 G3 or MSA2000 array controller enclosure.


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware update resolves the below issues:

  • During SAS 2.0 speed negotiations drive fails to see HARD RESET.
  • Drive does not acknowledge a hard reset and treats the reset as a link reset.
  • Hung Phy during disk reset test.
  • Seeks to the system cylinders dwell for a long time.
  • 04/8087/80 IOEDC error on write.

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.

Version:000B (2 Sep 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Following fixes were added to this version of firmware:

  • Hard resets could hang the drive
  • Unexpected power loss/port loss
  • Various issues which would cause the LED to flash
Enhancements

Following enhancement was added to this version of firmware:

  •  Improvements to command processing which improve performance in certain workloads

Version:0008 (6 Sep 2011)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware update resolves the below issues:

  • During SAS 2.0 speed negotiations drive fails to see HARD RESET.
  • Drive does not acknowledge a hard reset and treats the reset as a link reset.
  • Hung Phy during disk reset test.
  • Seeks to the system cylinders dwell for a long time.
  • 04/8087/80 IOEDC error on write.

Version:0006 (14 Jul 2010)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Initial release with support for HP StorageWorks MSA2000 G2 and P2000 G3 MSA products


Type: Firmware - SAS Storage Disk
Version: 0008(6 Sep 2011)
Operating System(s):
Red Hat Enterprise Linux 4 (AMD64/EM64T)
Red Hat Enterprise Linux 4 (Itanium)
Red Hat Enterprise Linux 4 (x86)
Red Hat Enterprise Linux 5 Server (Itanium)
Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (Itanium)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (Itanium)
SUSE Linux Enterprise Server 11 (x86)

Description

This Linux Smart Component contains a firmware update for the LFF hard drive model ST3450857SS (450GB 15K SAS 6G) in HP StorageWorks P2000 G3 MSA and MSA2000 G2 configurations.

Installation Instructions

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.


To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

2ea30a6cce02cfadd0d6f01b6445cfe7b8f181de65bc57ead67e8b749af14121 CP015812.scexe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

  1. Place the downloaded firmware package in a temporary directory.

  2. Open a Linux command console.

  3. From the directory containing the downloaded file, enable execute access to this module by entering chmod +x CPxxxxxx.scexe, where CPxxxxxx.scexe represents the downloaded file.

  4. Execute the Smart Component by entering a command similar to the following: ./CPxxxxxx.scexe --target <ip_address> --user <username> --passwd <password>

  5. Follow onscreen instructions.

NOTE:
  • Use the -e or -f option when flashing a device, even if it is up to date.

  • Use the -g option when downgrading.

  • For details on supported command options, see the online help by executing the command ./CPxxxxxx.scexe or ./CPxxxxxx.scexe -h.

  • If the user name or password contains an exclamation mark (!), enclose the string in single quotes or enter a backslash (\) before the exclamation point. For example, ’!manage’ or \!manage


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.


Supported Devices and Features:
Firmware on the listed drives can be updated when attached to any P2000 G3 or MSA2000 array controller enclosure.


Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware update resolves the below issues:

  • During SAS 2.0 speed negotiations drive fails to see HARD RESET.
  • Drive does not acknowledge a hard reset and treats the reset as a link reset.
  • Hung Phy during disk reset test.
  • Seeks to the system cylinders dwell for a long time.
  • 04/8087/80 IOEDC error on write.

Important

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.

Revision History

Version:000B (2 Sep 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Following fixes were added to this version of firmware:

  • Hard resets could hang the drive
  • Unexpected power loss/port loss
  • Various issues which would cause the LED to flash
Enhancements

Following enhancement was added to this version of firmware:

  •  Improvements to command processing which improve performance in certain workloads

Version:0008 (6 Sep 2011)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


This firmware update resolves the below issues:

  • During SAS 2.0 speed negotiations drive fails to see HARD RESET.
  • Drive does not acknowledge a hard reset and treats the reset as a link reset.
  • Hung Phy during disk reset test.
  • Seeks to the system cylinders dwell for a long time.
  • 04/8087/80 IOEDC error on write.

Version:0006 (14 Jul 2010)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Initial release with support for HP StorageWorks MSA2000 G2 and P2000 G3 MSA products


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.