Printable version

Drivers & software

SUSE Linux Enterprise Server 15 SP1 Supplement Bundle for Service Pack for ProLiant

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Application - System Management
Version: 2019.03.1(24 Jul 2019)
Operating System(s): SUSE Linux Enterprise Server 15
Multi-part download
File name: manifest.zip (141 KB)
File name: supspp-2019.03.sles15.1.en.tar.gz (63 MB)
This supplement contains updated drivers to support SUSE Enterprise Linux 15 SP1 with the Service Pack for ProLiant. Before beginning installation, the supplement should be copied directly to a separate folder on a test platform.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The release notes for this version of the supplement are available at: http://www.hpe.com/servers/spp/download#tab=TAB4.   

 

Prerequisites:

IMPORTANT: Before deploying software updates on a target system, be sure that a recent backup of the target system is available in the event the deployment procedure fails.

To successfully deploy HP SUM on remote target systems based on a Linux operating system, the following must be available:  

  • libcrypt.so
  • libcrypt.so.1
  • /usr/lib/libqlsdm.so
  • /usr/lib64/libqlsdm-x86_64.so
  • /lib/cim/libqlsdm.so
  • /usr/lib/libemsdm.so
  • /usr/lib64/libemsdm.so
  • /lib/cim/libemsdm.so
  • /usr/lib/bfahbaapi.so
  • /usr/lib64/bfahbaapi.so
  • /lib/cim/bfahbaapi.so
  • linux-vdso.so.1
  • /lib64/libcrypt.so.1
  • /lib64/libpthread.so.0
  • /lib64/libz.so.1
  • /lib64/libdl.so.2
  • /lib64/librt.so.1
  • /usr/lib64/libstdc++.so.6
  • /lib64/libm.so.6
  • /lib64/libgcc_s.so.1
  • /lib64/libc.so.6
  • /lib64/ld-linux-x86-64.so.2

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

a4f8720ada076c4e9efea13c043c767d9e6e648883858b2b3f4121dbc79e29c4 manifest.zip
0eb9ba83abda0278832e02130535d79728238ad2c3a459b3393a31adca4f45d3 supspp-2019.03.sles15.1.en.tar.gz

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Installation of the Supplement for Service Pack for ProLiant Using Autorun: supplements may be installed via autorun if autorun is configured on the target Linux server.

Several autorun utilities are available for download from various Internet sites. These distributions will typically mount the CD-ROM on /media/cdrom.

For the purposes of these instructions, the CD-ROM is assumed to have been mounted on /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions.

Manual Installation of the Supplement for Service Pack for ProLiant :

  • For the remainder of this discussion, the CD mount directory will be considered to be /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions. If the CD-ROM mount point is not defined in /etc/fstab, a complete mount command will be required.
  • Download the latest supplemental as applicable. It will be in zipped format.
  • Login on the console as root
  • Copy the supplement on your local server. The supplement will be in zipped format.
  • Unzip/ Untar the supplement.
  • Go to the supplement folder either through GUI and run hpsum file or in command prompt give ./hpsum. Make sure to give read write permission to this file.

       Or

  • If the Operating is of x64bit architecture, go to x64bit folder in supplement, and run ./hpsum_bin_x64. This will launch HPSUM in the browser automatically.                                                                                                              
  • If the Operating system is of x86bit architecture, go to x86 folder in supplement, and run ./hpsum_bin_x86. This will launch HPSUM in the browser automatically.
  • Note: Make sure to have the supported browser installed on your system. 

The installer will open an interactive session which will allow you to install the Linux Service Pack for ProLiant supplement.

NOTE: Be sure to include the version of the compatibility libraries that is appropriate for your architecture. In some cases, there are separate 32-bit and 64-bit compatibility libraries for a given distribution.

For a current list of supported Linux distributions and versions (and their associated errata kernels), see the operating system support matrixes . The supplements are designed for use after you install the operating system so that you can update drivers, install  utilities (such as Health and iLO drivers), and install agents (Server, NIC, and Storage).


End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

If using Custom Download with this supplement and the 2019.03.1 Service Pack for ProLiant (SPP), selecting hardware filters may return inconsistent results.  Also, Custom Download may report a failed dependency on HPE Broadcom tg3 Ethernet Drivers for SUSE Linux Enterprise Server 15.  This driver is not part of the supplement, but is contained in the 2019.03.1 SPP.  It will be updated in a future SPP.  Please use the driver contained in the SLES15SP1 distribution.  Since this supplement does not contain NIC drivers, please use the drivers contained in the SLES15SP1 distribution for updating SLES15SP1OS.


If using Custom Download with this supplement and the 2019.03.1 Service Pack for ProLiant (SPP), selecting hardware filters may return inconsistent results.  Also, Custom Download may report a failed dependency on HPE Broadcom tg3 Ethernet Drivers for SUSE Linux Enterprise Server 15.  This driver is not part of the supplement, but is contained in the 2019.03.1 SPP.  It will be updated in a future SPP.  Please use the driver contained in the SLES15SP1 distribution.  Since this supplement does not contain NIC drivers, please use the drivers contained in the SLES15SP1 distribution for updating SLES15SP1OS.

Version:2019.03.1 (24 Jul 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The release notes for this version of the supplement are available at: http://www.hpe.com/servers/spp/download#tab=TAB4.   

 


Type: Application - System Management
Version: 2019.03.1(24 Jul 2019)
Operating System(s):
SUSE Linux Enterprise Server 15

Description

This supplement contains updated drivers to support SUSE Enterprise Linux 15 SP1 with the Service Pack for ProLiant. Before beginning installation, the supplement should be copied directly to a separate folder on a test platform.

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The release notes for this version of the supplement are available at: http://www.hpe.com/servers/spp/download#tab=TAB4.   

 

Installation Instructions

Prerequisites:

IMPORTANT: Before deploying software updates on a target system, be sure that a recent backup of the target system is available in the event the deployment procedure fails.

To successfully deploy HP SUM on remote target systems based on a Linux operating system, the following must be available:  

  • libcrypt.so
  • libcrypt.so.1
  • /usr/lib/libqlsdm.so
  • /usr/lib64/libqlsdm-x86_64.so
  • /lib/cim/libqlsdm.so
  • /usr/lib/libemsdm.so
  • /usr/lib64/libemsdm.so
  • /lib/cim/libemsdm.so
  • /usr/lib/bfahbaapi.so
  • /usr/lib64/bfahbaapi.so
  • /lib/cim/bfahbaapi.so
  • linux-vdso.so.1
  • /lib64/libcrypt.so.1
  • /lib64/libpthread.so.0
  • /lib64/libz.so.1
  • /lib64/libdl.so.2
  • /lib64/librt.so.1
  • /usr/lib64/libstdc++.so.6
  • /lib64/libm.so.6
  • /lib64/libgcc_s.so.1
  • /lib64/libc.so.6
  • /lib64/ld-linux-x86-64.so.2

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

a4f8720ada076c4e9efea13c043c767d9e6e648883858b2b3f4121dbc79e29c4 manifest.zip
0eb9ba83abda0278832e02130535d79728238ad2c3a459b3393a31adca4f45d3 supspp-2019.03.sles15.1.en.tar.gz

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Installation of the Supplement for Service Pack for ProLiant Using Autorun: supplements may be installed via autorun if autorun is configured on the target Linux server.

Several autorun utilities are available for download from various Internet sites. These distributions will typically mount the CD-ROM on /media/cdrom.

For the purposes of these instructions, the CD-ROM is assumed to have been mounted on /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions.

Manual Installation of the Supplement for Service Pack for ProLiant :

  • For the remainder of this discussion, the CD mount directory will be considered to be /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions. If the CD-ROM mount point is not defined in /etc/fstab, a complete mount command will be required.
  • Download the latest supplemental as applicable. It will be in zipped format.
  • Login on the console as root
  • Copy the supplement on your local server. The supplement will be in zipped format.
  • Unzip/ Untar the supplement.
  • Go to the supplement folder either through GUI and run hpsum file or in command prompt give ./hpsum. Make sure to give read write permission to this file.

       Or

  • If the Operating is of x64bit architecture, go to x64bit folder in supplement, and run ./hpsum_bin_x64. This will launch HPSUM in the browser automatically.                                                                                                              
  • If the Operating system is of x86bit architecture, go to x86 folder in supplement, and run ./hpsum_bin_x86. This will launch HPSUM in the browser automatically.
  • Note: Make sure to have the supported browser installed on your system. 

The installer will open an interactive session which will allow you to install the Linux Service Pack for ProLiant supplement.

NOTE: Be sure to include the version of the compatibility libraries that is appropriate for your architecture. In some cases, there are separate 32-bit and 64-bit compatibility libraries for a given distribution.

For a current list of supported Linux distributions and versions (and their associated errata kernels), see the operating system support matrixes . The supplements are designed for use after you install the operating system so that you can update drivers, install  utilities (such as Health and iLO drivers), and install agents (Server, NIC, and Storage).


Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Important:

If using Custom Download with this supplement and the 2019.03.1 Service Pack for ProLiant (SPP), selecting hardware filters may return inconsistent results.  Also, Custom Download may report a failed dependency on HPE Broadcom tg3 Ethernet Drivers for SUSE Linux Enterprise Server 15.  This driver is not part of the supplement, but is contained in the 2019.03.1 SPP.  It will be updated in a future SPP.  Please use the driver contained in the SLES15SP1 distribution.  Since this supplement does not contain NIC drivers, please use the drivers contained in the SLES15SP1 distribution for updating SLES15SP1OS.


Important

If using Custom Download with this supplement and the 2019.03.1 Service Pack for ProLiant (SPP), selecting hardware filters may return inconsistent results.  Also, Custom Download may report a failed dependency on HPE Broadcom tg3 Ethernet Drivers for SUSE Linux Enterprise Server 15.  This driver is not part of the supplement, but is contained in the 2019.03.1 SPP.  It will be updated in a future SPP.  Please use the driver contained in the SLES15SP1 distribution.  Since this supplement does not contain NIC drivers, please use the drivers contained in the SLES15SP1 distribution for updating SLES15SP1OS.

Revision History

Version:2019.03.1 (24 Jul 2019)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


The release notes for this version of the supplement are available at: http://www.hpe.com/servers/spp/download#tab=TAB4.   

 


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.