Resolved an issue where the LO100c option firmware date would display the previous firmware date after upgrading.
Removed the display of invalid Console Redirection options when the serial port is disabled.
Updated the POST display to indicate "MB System RAM Passed" instead of "M System RAM Passed".
Resolved an issue where the Xeon 3000 series processor is not displayed correctly in the BIOS Setup Utility. Resolved an issue with initializing the U320 PCI-E SCSI card during POST. The option ROM and configuration utility would not show up in POST.
Resolved an issue where the system Event Log in the BIOS Setup Utility was not in sync with the IPMI remote event log through web interface.
Resolved an issue where the removal of a fan or a fan failure would log a high critical event instead of a low critical event.
Resolved an issue where the AAR2610SA/64MB/HP RAID controller Option ROM and configuration utility does not show up in POST.
Resolved an issue with timeout failures when installing Windows through PXE.
Resolved an issue where HP OBDR USB tape (DAT 40) configuration is not available during POST.
Resolved an issue where LO100c Option "power policy" in the remote web interface did not function with change in synchronization with the BIOS Setup Utility thus it was not completely functional.
Corrected Com port display in the BIOS Setup Utilty from COM 1 and COM 2 to COM A and COM B respectively.
Resolved an issue where the BIOS Summary was not displaying correct Serial Port Address which is setup in the BIOS Setup Utility.
Resolved an issue where the HP logo screen is not displayed when using the HP USB tape device (DAT24, DAT40, and DAT72).
Resolved an issue where the system would not shutdown under Linux if a x1 or x4 PCI-E card is installed in the PCI-E x4 slot.
Resolved an issue which resulted in a hang or auto-reboot when using a USB tape drive and shutting down the system under Linux SUSE9 32bit with SP3.
Corrected the help description in the BIOS Setup Utility for the IPMI baud rate setup.
Resolved an issue where the system event log was not getting updated while being viewed.
Increased the volume of the system beeper for POST errors.
Resolved an issue where the F12 PXE boot option was not displayed when a POST error occurred.
Removed the "Shift + 1" function key from BIOS Setup Utility which was supposed to disable the selected boot devices in the Boot Menu but was not functional.
Resolved an issue where the fan speed readings between the BIOS Setup Utility and the LO100c web user interface were not synchronized.
Corrected the display in the BIOS Setup Utility "Boot" tab to display "CD-ROM / DVD-ROM" instead of "CD-ROM drive".
Modified the help message for the Enhanced Intel SpeedStep Technology to clearly differentiate the processor differences when using Linux SUSE 9.
Resolved an issue in the BIOS Setup Utility where the "share NIC mode" option could not be disabled after enabling and rebooting.