This utility requires the following minimum firmware revisions:
- Integrated Lights-Out 3 firmware v1.00 or later
- Integrated Lights-Out 4 firmware v1.00 or later
- Integrated Lights-Out 5 firmware v1.20 or later
The management interface driver and management agents must be installed on the server.
For iLO 5, openssl v1.0.x or later is required in addition to above packages.
Customers who manually compile and install openssl or intentionally relocate /usr/bin/openssl, need to set PATH environment variable to direct HPONCFG to the right/intended openssl.
To ensure the integrity of your download, HPE recommends verifying your results with
the following SHA-256 Checksum values:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :
To install the package, type:
- rpm -ivh hponcfg-x.x.x.x86_64.rpm
After installation, the executable for hponcfg utility can be found under the directory /sbin.