Printable version

Drivers & software

* RECOMMENDED * iLO 4 Channel Interface Driver for Windows Server 2016 and Server 2019

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Driver - System Management
Version: 4.1.0.0(9 Sep 2019)
Operating System(s): Microsoft Windows Server 2016
Microsoft Windows Server 2019
File name: cp039985.exe (602 KB)
The iLO 4 Channel Interface Driver allows software to communicate with the iLO 4 management controller. The driver is used by the ProLiant Health Monitor, Insight Management Agents and WBEM Providers, Agentless Management Service, and other utilities.

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

af397c212a4f5630223d31e0f2835458ea50929dd29f6bf3c3740a3675f1ddee cp039985.exe

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:
Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.

Version:4.1.0.0 (9 Sep 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.


Version:4.0.0.0 (27 Nov 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Add support for Windows Server 2019.


Version:3.31.0.0 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.


Version:3.30.0.0 (24 Oct 2016)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release to support Windows Server 2016.


Type: Driver - System Management
Version: 4.1.0.0(9 Sep 2019)
Operating System(s):
Microsoft Windows Server 2016
Microsoft Windows Server 2019

Description

The iLO 4 Channel Interface Driver allows software to communicate with the iLO 4 management controller. The driver is used by the ProLiant Health Monitor, Insight Management Agents and WBEM Providers, Agentless Management Service, and other utilities.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

af397c212a4f5630223d31e0f2835458ea50929dd29f6bf3c3740a3675f1ddee cp039985.exe

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:
Place the Smart Component in a temporary directory, then double-click it to run.

Select "Install" to start extracting to a temporary location on the hard drive.

Click the "Install" button to perform the driver installation.


Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.

Revision History

Version:4.1.0.0 (9 Sep 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.


Version:4.0.0.0 (27 Nov 2018)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Add support for Windows Server 2019.


Version:3.31.0.0 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.


Version:3.30.0.0 (24 Oct 2016)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release to support Windows Server 2016.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.