Printable version

Drivers & software

HP Embedded SATA RAID Controller Driver for Windows 2000/Windows Server 2003

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Driver - Storage Controller
Version: 1.2.5567.0(19 Nov 2006)
Operating System(s): Microsoft Windows 2000
Microsoft Windows Server 2003
File name: adpahci-1.2.5567.0.w2k3.x86.zip (158 KB)
This driver provides support for HP Embedded SATA RAID Controller on Windows 2000/Windows Server 2003.
Added support for the HP ProLiant DL140 G3 and HP ProLiant ML150 G3.

Installation:
Installing the Driver in a New Windows System:

In this scenario, you are installing the driver in a new system that has no operating system. To install the driver:

  • Create a driver disk by copying the contents of the Smart Component to a floppy diskette.
  • If creating an array, press Ctrl+A or F8 when prompted to enter the BIOS Setup utility.
  • Press F6 when prompted to install a third-party driver.

    Note: When F6 is active, a prompt appears at the bottom of the screen. Press F6 immediately—you only have 5 seconds. If you miss your chance, restart this Windows installation to complete it correctly. Otherwise, Windows will not recognize your controller.

  • Insert the driver disk you created in Step 1 and wait until prompted to install a driver.
  • Press "S" to specify that the driver is on the floppy disk, then press Enter.
  • When the HP Embedded SATA RAID driver is found, press Enter. Follow the remaining on-screen instructions to complete your installation.

Installing the Driver in an Existing Windows System:

In this scenario, you are installing a driver in a system that already has a Windows operating system. To install the driver:

  • Create a driver disk by exracting the contents of Smart Component to a floppy diskette.
  • Start Windows. Windows launches the Found New Hardware Wizard, which searches for the controller driver.
  • Insert the driver disk you created in Step 1, select the floppy disk drive as the source then click Next.
  • If necessary, select the appropriate driver for your operating system.
  • Click Next as needed to complete the controller installation.
  • Remove the driver disk.
  • If prompted, restart the computer.
Customer Service
For support, please send email to contact.hp@hp.com

End User License Agreements:
Hewlett-Packard End User License Agreement


Important:
See the revision history for older/previous driver versions.


See the revision history for older/previous driver versions.
Version:1.2.5567.0 (12 Mar 2007)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • The previously published 1.2.5567.0 driver that was available in ZIP format from HP.com has been repackaged into this Smart Component to automate the driver installation process.  This Smart Component contains the same driver binaries as the adpahci-1.2.5567.0.w2k3.x86.zip component.

Version:1.2.5567.0 (19 Nov 2006)
Enhancements
Added support for the HP ProLiant DL140 G3 and HP ProLiant ML150 G3.

Version:1.2.5545 (26 Jun 2006)
Enhancements
Added support for the HP ProLiant DL140 G3 and HP ProLiant ML150 G3.

Version:1.0.414.0-3842 (15 Aug 2005)
Enhancements
Added support for the HP ProLiant ML110 G3.

Type: Driver - Storage Controller
Version: 1.2.5567.0(19 Nov 2006)
Operating System(s):
Microsoft Windows 2000
Microsoft Windows Server 2003

Description

This driver provides support for HP Embedded SATA RAID Controller on Windows 2000/Windows Server 2003.

Enhancements

Added support for the HP ProLiant DL140 G3 and HP ProLiant ML150 G3.

Installation Instructions

Installation:
Installing the Driver in a New Windows System:

In this scenario, you are installing the driver in a new system that has no operating system. To install the driver:

  • Create a driver disk by copying the contents of the Smart Component to a floppy diskette.
  • If creating an array, press Ctrl+A or F8 when prompted to enter the BIOS Setup utility.
  • Press F6 when prompted to install a third-party driver.

    Note: When F6 is active, a prompt appears at the bottom of the screen. Press F6 immediately—you only have 5 seconds. If you miss your chance, restart this Windows installation to complete it correctly. Otherwise, Windows will not recognize your controller.

  • Insert the driver disk you created in Step 1 and wait until prompted to install a driver.
  • Press "S" to specify that the driver is on the floppy disk, then press Enter.
  • When the HP Embedded SATA RAID driver is found, press Enter. Follow the remaining on-screen instructions to complete your installation.

Installing the Driver in an Existing Windows System:

In this scenario, you are installing a driver in a system that already has a Windows operating system. To install the driver:

  • Create a driver disk by exracting the contents of Smart Component to a floppy diskette.
  • Start Windows. Windows launches the Found New Hardware Wizard, which searches for the controller driver.
  • Insert the driver disk you created in Step 1, select the floppy disk drive as the source then click Next.
  • If necessary, select the appropriate driver for your operating system.
  • Click Next as needed to complete the controller installation.
  • Remove the driver disk.
  • If prompted, restart the computer.
Customer Service
For support, please send email to contact.hp@hp.com

Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Important:
See the revision history for older/previous driver versions.


Important

See the revision history for older/previous driver versions.

Revision History

Version:1.2.5567.0 (12 Mar 2007)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


  • The previously published 1.2.5567.0 driver that was available in ZIP format from HP.com has been repackaged into this Smart Component to automate the driver installation process.  This Smart Component contains the same driver binaries as the adpahci-1.2.5567.0.w2k3.x86.zip component.

Version:1.2.5567.0 (19 Nov 2006)
Enhancements
Added support for the HP ProLiant DL140 G3 and HP ProLiant ML150 G3.

Version:1.2.5545 (26 Jun 2006)
Enhancements
Added support for the HP ProLiant DL140 G3 and HP ProLiant ML150 G3.

Version:1.0.414.0-3842 (15 Aug 2005)
Enhancements
Added support for the HP ProLiant ML110 G3.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.