Printable version

Drivers & software

* RECOMMENDED * Integrated Smart Update Tools for Linux x64

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Application - System Management
Version: 2.4.0.0(2 Apr 2019)
Operating System(s): Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 15
Multi-part download
File name: sut-2.4.0-61.linux.x86_64.compsig (2.0 KB)
File name: sut-2.4.0-61.linux.x86_64.rpm (7.1 MB)
Integrated Smart Update Tools (iSUT) is an application which enables firmware and software deployment via the iLO management network using the server’s local administrator credentials. iSUT can run as a service when working with HPE OneView managed servers or iLO Amplifier Pack or in an On Demand mode. iSUT requires a Service Pack for ProLiant-based ISO containing Smart Update Manager version 8.0.0 or later and an iLO Advanced Pack license for deployment.

See the iSUT Release Notes for information about the enhancements in this release

Prerequisites:

For prerequisite information, please see the iSUT Release Notes.


To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

56590a5712e68672af7f6838ec3da1f922c70fd79ee8a9b143358d554e0304d7 sut-2.4.0-61.linux.x86_64.compsig
7422ce16ca9c5a1800f5686d5464b93865f55d13da1eb9a5d9d64573d0cc1de7 sut-2.4.0-61.linux.x86_64.rpm

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Download the rpm package to a directory on your hard drive and change to that directory. Install by typing rpm -Uvh sut-XXX.x86_64.rpm.


End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

Please note the following:

iSUT requires a Service Pack for ProLiant-based ISO containing Smart Update Manager (SUM) 8.0.0 or later. If an earlier version of SUM is used, iSUT will notify the user that SUM 8.0.0 and later is required.

iSUT will service HP ProLiant Gen8 and later versions and requires iLO 4 firmware version 2.51 or later. For Gen10 and above we need iLO 5 firmware version 1.11 or later

Integrated Smart Update Tools requires iLO Advanced Pack license. 


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


See the iSUT Release Notes for information about the enhancements in this release

Please note the following:

iSUT requires a Service Pack for ProLiant-based ISO containing Smart Update Manager (SUM) 8.0.0 or later. If an earlier version of SUM is used, iSUT will notify the user that SUM 8.0.0 and later is required.

iSUT will service HP ProLiant Gen8 and later versions and requires iLO 4 firmware version 2.51 or later. For Gen10 and above we need iLO 5 firmware version 1.11 or later

Integrated Smart Update Tools requires iLO Advanced Pack license. 

Version:2.4.0.0 (2 Apr 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


See the iSUT Release Notes for information about the enhancements in this release

Enhancements

See the iSUT Release Notes for information about the enhancements in this release


Version:2.3.6.0 (29 Nov 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


See the iSUT Release Notes for information about the enhancements in this release

Enhancements

See the iSUT Release Notes for information about the enhancements in this release


Version:2.3.0.0 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


See the iSUT Release Notes for information about the enhancements in this release

Enhancements

See the iSUT Release Notes for information about the enhancements in this release


Version:2.2.1.0 (3 May 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


SUT status shows Install failed though the update is successful.

SUT self-upgrade from 2.0.1 to 2.2.1 did not work.


Version:2.2.0.0 (5 Feb 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


See the iSUT Release Notes for information about the issues resolved in this release

Enhancements

See the iSUT Release Notes for information about the enhancements in this release


Version:2.1.0.0 (22 Dec 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

iSUT 2.0.0 and later is required on HPE ProLiant Gen 10 servers.


See the iSUT Release Notes for information about the issues resolved in this release.

Enhancements

See the iSUT Release Notes for information about the enhancements in this release.


Version:2.0.1.0 (25 Sep 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Online update from iLO Amplifier Pack failed due to SUM deployment failure
  • SUT settings not restored in OV post upgrade from 1.6.5 to 2.0.0
Enhancements

See the iSUT Release Notes for information about the issues resolved in this release.


Version:2.0.0.0 (12 Jul 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

iSUT 2.0.0 and later is required on HPE ProLiant Gen 10 servers.


See the iSUT Release Notes for information about the issues resolved in this release.

Enhancements

See the iSUT Release Notes for information about the enhancements in this release.


Version:1.6.5.1 (25 Oct 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This version contains a fix to enable verification of some components released after SUT 1.6.5 was signed off.


See the HP SUT Release Notes for information about the issues resolved in this release.

Enhancements

Enhancements for HP SUT 1.6.5:

  • Added support for new HPE Synergy Gen9 Compute Modules, HPE ProLiant Gen9 servers, and options
  • Added support for Microsoft Windows Server 2016
  • Add signature checking prior to component deployment

Version:1.0.1.0 (21 Oct 2016)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Fixes for HP SUT 1.0.1:

  • Changed the default installation mode to On Demand
  • HP SUT Self Update does not fail on a TPM-enabled machine
  • Installation of CHIF driver does not cause ProLiant Gen9 servers to unexpectedly reboot

Version:1.0.0.0 (26 Oct 2015)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release of HP Smart Update Tools

Please see the HP SUT Release Notes for additional information.


Type: Application - System Management
Version: 2.4.0.0(2 Apr 2019)
Operating System(s):
Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 15

Description

Integrated Smart Update Tools (iSUT) is an application which enables firmware and software deployment via the iLO management network using the server’s local administrator credentials. iSUT can run as a service when working with HPE OneView managed servers or iLO Amplifier Pack or in an On Demand mode. iSUT requires a Service Pack for ProLiant-based ISO containing Smart Update Manager version 8.0.0 or later and an iLO Advanced Pack license for deployment.

Enhancements

See the iSUT Release Notes for information about the enhancements in this release

Installation Instructions

Prerequisites:

For prerequisite information, please see the iSUT Release Notes.


To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

56590a5712e68672af7f6838ec3da1f922c70fd79ee8a9b143358d554e0304d7 sut-2.4.0-61.linux.x86_64.compsig
7422ce16ca9c5a1800f5686d5464b93865f55d13da1eb9a5d9d64573d0cc1de7 sut-2.4.0-61.linux.x86_64.rpm

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Download the rpm package to a directory on your hard drive and change to that directory. Install by typing rpm -Uvh sut-XXX.x86_64.rpm.


Release Notes

End User License Agreements:
HPE Software License Agreement v1


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

Please note the following:

iSUT requires a Service Pack for ProLiant-based ISO containing Smart Update Manager (SUM) 8.0.0 or later. If an earlier version of SUM is used, iSUT will notify the user that SUM 8.0.0 and later is required.

iSUT will service HP ProLiant Gen8 and later versions and requires iLO 4 firmware version 2.51 or later. For Gen10 and above we need iLO 5 firmware version 1.11 or later

Integrated Smart Update Tools requires iLO Advanced Pack license. 


Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


See the iSUT Release Notes for information about the enhancements in this release

Important

Please note the following:

iSUT requires a Service Pack for ProLiant-based ISO containing Smart Update Manager (SUM) 8.0.0 or later. If an earlier version of SUM is used, iSUT will notify the user that SUM 8.0.0 and later is required.

iSUT will service HP ProLiant Gen8 and later versions and requires iLO 4 firmware version 2.51 or later. For Gen10 and above we need iLO 5 firmware version 1.11 or later

Integrated Smart Update Tools requires iLO Advanced Pack license. 

Revision History

Version:2.4.0.0 (2 Apr 2019)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


See the iSUT Release Notes for information about the enhancements in this release

Enhancements

See the iSUT Release Notes for information about the enhancements in this release


Version:2.3.6.0 (29 Nov 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


See the iSUT Release Notes for information about the enhancements in this release

Enhancements

See the iSUT Release Notes for information about the enhancements in this release


Version:2.3.0.0 (26 Jun 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


See the iSUT Release Notes for information about the enhancements in this release

Enhancements

See the iSUT Release Notes for information about the enhancements in this release


Version:2.2.1.0 (3 May 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


SUT status shows Install failed though the update is successful.

SUT self-upgrade from 2.0.1 to 2.2.1 did not work.


Version:2.2.0.0 (5 Feb 2018)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


See the iSUT Release Notes for information about the issues resolved in this release

Enhancements

See the iSUT Release Notes for information about the enhancements in this release


Version:2.1.0.0 (22 Dec 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

iSUT 2.0.0 and later is required on HPE ProLiant Gen 10 servers.


See the iSUT Release Notes for information about the issues resolved in this release.

Enhancements

See the iSUT Release Notes for information about the enhancements in this release.


Version:2.0.1.0 (25 Sep 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • Online update from iLO Amplifier Pack failed due to SUM deployment failure
  • SUT settings not restored in OV post upgrade from 1.6.5 to 2.0.0
Enhancements

See the iSUT Release Notes for information about the issues resolved in this release.


Version:2.0.0.0 (12 Jul 2017)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

iSUT 2.0.0 and later is required on HPE ProLiant Gen 10 servers.


See the iSUT Release Notes for information about the issues resolved in this release.

Enhancements

See the iSUT Release Notes for information about the enhancements in this release.


Version:1.6.5.1 (25 Oct 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This version contains a fix to enable verification of some components released after SUT 1.6.5 was signed off.


See the HP SUT Release Notes for information about the issues resolved in this release.

Enhancements

Enhancements for HP SUT 1.6.5:

  • Added support for new HPE Synergy Gen9 Compute Modules, HPE ProLiant Gen9 servers, and options
  • Added support for Microsoft Windows Server 2016
  • Add signature checking prior to component deployment

Version:1.0.1.0 (21 Oct 2016)
Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Fixes for HP SUT 1.0.1:

  • Changed the default installation mode to On Demand
  • HP SUT Self Update does not fail on a TPM-enabled machine
  • Installation of CHIF driver does not cause ProLiant Gen9 servers to unexpectedly reboot

Version:1.0.0.0 (26 Oct 2015)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial release of HP Smart Update Tools

Please see the HP SUT Release Notes for additional information.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.